QTR-Quadtone RIP

Allen - 

I had this same problem on my Epson R1800.  Probably worse - I could only get about 1/2 of a page, the other half solid black with horrible banding separating right and left side.  I found out that when Photoshop saves a file in tiff, you can choose an option to either interleave the channels, or save them in 'per channel format'.  While I don't really understand the difference -- photoshop says RGBRGBRGB vs RRRGGGBBB -- when I switched the save option to interleave the printing problem went away.  

I hope that helps.

Mike Hill

----- Original Message ----
From: mbotija <mbotija@...>
To: QuadtoneRIP@yahoogroups.com
Sent: Friday, January 5, 2007 1:15:52 PM
Subject: [QuadtoneRIP] Re: suddenly printing only 2/3 of print









  


    
            --- In QuadtoneRIP@ yahoogroups. com, allan chen <allan@...> wrote:

>

> all,

> 	I'm using a 1280, ut2, originally with qtr 2.4.1 then upgraded 

to

> 2.4.3.10 then to 2.4.3.15.  Worked fine the last time I printed (on

> 2.4.1) about a month ago.  Now, all of a sudden, with settings the 

same,

> I'm only getting 2/3 of the print onto the paper.  I turned off 

advanced 

> printing features, which caused problems on some other epson printers 

> I've had in the past.  Any clues as to what else could be happening?

> 

> thanks,

> allan

>



Allan,



I had this problem and some similar in my 1290 (=1280 in Europe)like 

printing in some parts of the print very fine lines wider than the 

image, all were solved whe conecting the printer to another computer (a 

laptop)and turning again to the first compuer...



Manuel





    
  

    
    




<!--