QTR-Quadtone RIP

Be aware that you cannot modify the profiles supplied for the K6 
inks.  At least as far as I'm aware.  Profiles supported by QTR have 
either a .qid or a .quad extension.  One of these is not editable and 
that's how the K6 ink profiles are stored.

Mike

--- In QuadtoneRIP@yahoogroups.com, "Jeff Randall" <jrandall@...> 
wrote:
>
> The Users Guide explains the proceedure to create QTR profiles from 
> scratch or relinerize canned QTR profiles (those supplied with the 
QTR 
> installation) specifically for your printer and it's quirks.  If 
you 
> are happy with the canned profiles as is, then follow the Piezo 
> website printing instructions.
> 
> --- In QuadtoneRIP@yahoogroups.com, "patmcvicker" <patmcvicker@> 
> wrote:
> >
> > We're dedicating an Epson7500 to K6inks using QuadToneRIP.  
> > Instructions on the Piezography website indicate a very straight 
> > forward method for printing ("QuadToneRIP settings on Windows 
> Systems") 
> > using the correct curve for the paper/ink combo.  When reading 
the 
> > QTRIP Users Guide however, there seems to be quite an involved 
setup 
> > procedure before printing (Characterizing the Ink/Paper Combo, 
> > Determining the Ink Limit, etc).  Is the Users Guide more for 
color 
> > inks? Thanks, Pat
> >
>