QTR-Quadtone RIP

Jeff - 

Correct.  I used a canned K7 profile with the R1800-K7 printer model.
  ----- Original Message ----- 
  From: Jeff Randall 
  To: QuadtoneRIP@yahoogroups.com 
  Sent: Thursday, February 15, 2007 12:22 PM
  Subject: [QuadtoneRIP] Re: R1800 K7 driver does not work


  OK, To recap, you were getting good prints using the K7 inkset 
  printing through QTR using one of the "canned" profiles (.quad files) 
  installed with the QTR installation and all of a sudden you started to 
  get muddled prints. Correct?

  If you are printing using QTR, the Epson driver is totally out of the 
  loop -- so all settings there are ignored.

  --- In QuadtoneRIP@yahoogroups.com, "Michael Hill" <mdhill60@...> 
  wrote:

  I took out the K7 inks and put standard epson inks back in to trouble 
  shoot the situation. I know the blues are coming from 
  having 'colored' inks in them, but when I put the K7 inkset in and use 
  QTR all of the light tones are completely washed over, creating a very 
  muddy look. I know the flushing isn't the issue because I've had the 
  K7s in for several weeks of good printing before all of this started.



   

[Non-text portions of this message have been removed]