QTR-Quadtone RIP

Unfortunately you are right the K7 profiles can't be re-linearized 
because the
Piezo profiles don't use and don't provide the standard QTR profile 
source.

You could start over again and make your own K7 profiles with the QTR 
profile
program but a much easier and better thing is to create a custom ICC 
profile
for printing (and softproofing in Photoshop).   The method is very 
similar to
linearizing but instead you use QTR-Create-ICC with the same Eye-One 
data.
This makes a .icc file that is use in the Print with Preview or Proof 
setup.

Roy

On Sunday, May 6, 2007, at 08:45  AM, mojojones2001 wrote:

> Hello,
>
> I new to this linearization process so please forgive my ignorance.
> My understanding is that for the Eye One process you print out the
> target, measure it, process the measure file with QTR-Linearize-Data,
> then paste the LINEARIZE line into the Ink Descriptor file and
> reprocess it with Drop-Quad-Profile.  But there are no descriptor file
> in the download so how can I do this?
>
> thanks.
>
>
-
Roy Harrington
roy@...
Black & White Photo Gallery
http://www.harrington.com