QTR-Quadtone RIP

I did have the same problem. In my case the hatch did close but 
sometimes it sprang open while printing.

My fix for the problem is a strip of adhesive tape on the left side of 
the ink container that  keeps the hatch in place. I have to replace the 
tape after changing ink for more than two or three times but besides 
this small issue everything is working fine now.

Michael

Tom Husband schrieb:
> I'm not aware of one.  I thought I was the only one who had that
> problem.  Back in October of last year I couldn't get the K7
> cartridges to fit in my 2400.  There were numerous emails back and
> forth between InkjetMall and myself.  They sent carbon paper and asked
> me to insert paper between the latch cover and the carbon paper to
> determine where the latch was hitting.  I took pictures and sent them
> back.  Turns out it was hitting on every cartridge preventing the
> cover from closing.  They sent another set of ink but it was no better
> than the first set.  I tried clipping the cartridge insertion catch
> but then I couldn't get the cartridge out.  I finally gave up and they
> refunded my money.  I'd love to give K7 ink a whirl but am a bit leery.
>
> It must not be a huge problem as your note is the first I've seen.  I
> wonder if it's unique to just few 2400's?
>
> Tom
>
> --- In QuadtoneRIP@yahoogroups.com, "Dale" <dalemerrill2515@...> wrote:
>   
>> Is there a solution to keeping the ink door latched when using the K7 
>> ink set?
>>
>>     
>
>
>
>
>  
> Yahoo! Groups Links
>
>
>
>