QTR-Quadtone RIP

Thanks Mark.  
I had looked into this on a previous occasion, with little luck, and was going to revisit it 
this morning more carefully.  I am curious if you have found any technical information on 
what these these settings actually do?  I didn't notice any linear progression from 1 to 9, in 
fact it seemed sort of random. What have your observations been in this regard?  

This banding seems to depend on the file: some print perfectly smooth, some very 
banded; and some values smooth, some banded in the same print!  (It doesn't seem to be 
a paper feed problem. )

Chris   

--- In QuadtoneRIP@yahoogroups.com, "Mark McCarvill" <espresso_forte@...> wrote:
>
> Hi Chris,
> 
> You can adjust the intensity of the micro-weave manually via the
> printer's control panel. It's under SelecType > Paper Config > Print
> Adj. The default is something like 5 but I keep mine at the max, which
> is 9.
> 
> Mark 
> 
> --- In QuadtoneRIP@yahoogroups.com, "cwb1946" <cb@> wrote:
> >
> > I am used to using the "Super MicroWeave setting in the Epson 7600
> driver to get rid of 
> > horizontal (print head direction) banding.  When using QTR this
> control is not available.  Does 
> > anyone have an alternate work around to accomplish the same results?
> > 
> > Chris
> >
>