QTR-Quadtone RIP

Hallo everybody

I have tried the following remedies:

1. To select the roll feed with automatic cutter on in the printer
display and in QTR.
2. To select the roll feed with automatic cutter on in the WINDOWS ->
System -> Printers ->4800 -> Properties as the standard setting and
also in QTR.
3. I tried to transport the paper on the roll backwards using the
appropriate button on the printer display. I was able to transoprt the
paper backwards but it was pulled out again after the "print" command
has been given.

Alas none of these brought any improvement and I am still loosing the
same amount of paper.

Any new ideas anybody?

Thank you
Juraj

--- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@...> wrote:
>
> Well the R2400 doesn't have a front panel to select roll paper feed.
> But it is also important that the selection in QTRgui matches where
you put
> the
> paper i.e. if you put paper in the manual slot in back you must
select the
> corresponding Manual Roll selection in QTRgui;   and if you have
roll paper
> in a printer that you select a roll paper selection in QTRgui.
> 
> Roy
> 
> On Dec 1, 2007 12:47 PM, David Miller <daveinmoscow@...> wrote:
> 
> > Will this be the same issue when I use roll paper on
> > my 2400?  I'll make sure both are set to roll
> > paper....
> >
> > Dave
> > --- Roy Harrington < roy@...> wrote:
> >
> > > The main thing to check is that the selection on the
> > > printer itself agrees
> > > with the selection in QTRgui.   They both should say
> > > Roll Paper for it
> > > to work correctly.
> > >
> > > Roy
> > >
> > > On Dec 1, 2007 6:05 AM, jurajlipscher
> > > <juraj@...> wrote:
> > >
> > > > Hallo
> > > > I am on WIN XP, QTR 2.5.2.0 and I am printing on a
> > > 4800 using Piezo K7
> > > > inks from a 13" roll. My problem is the waste of
> > > paper with each
> > > > print. The 4800 first positions the roll about 4,9
> > > inch from the
> > > > correct starting point of the print. Using the
> > > EPSON driver and
> > > > Photoshop 'Print with Preview' causes the printer
> > > to pull in the roll
> > > > 4,9 inch inwards before starting to print, so that
> > > the print comes out
> > > > with correct margins.
> > > >
> > > > Now using QTR the printer does not pull the roll
> > > inwards at all and I
> > > > lose 4,9 inch of paper with each print. (With
> > > Piezo K7 inks I cannot
> > > > use the Epson driver/Photoshop workflow)
> > > >
> > > > Does anyone know of any workaround or could anyone
> > > point me in the
> > > > right direction?
> > > >
> > > > Juraj
> > > >
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been
> > > removed]
> > >
> > >
> >
> >
> >
> >
> > 
____________________________________________________________________________________
> > Be a better sports nut!  Let your teams follow you
> > with Yahoo Mobile. Try it now. 
http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> 
> 
> [Non-text portions of this message have been removed]
>