QTR-Quadtone RIP

Eric, thanks a lot for your help! I have CS 1 so there is no question
of CS 3 issues. My paper size (13 x 9.5") is set to the full width of
the 13" roll but my print is smaller than the roll dimensions (print
dimension = approx. 7 x 8") or in other words I do not print
borderless and do not have the "borderless" box checked in the driver
settings. As my print is smaller than the paper size I cannot have the
"to fit" box checked in QTR
I have just emailed Roy all the data he requested from me and hope
that the problem is going to be resolved - even more so seeing that 
you do not experience any problems in this direction with the same
printer.

Juraj

--- In QuadtoneRIP@yahoogroups.com, "E Neilsen" <e.neilsen2@...> wrote:
>
> Juraj, I just printed an image with my 4800 with roll cutter on. It
drew the
> paper back in just like it should both with CS3 direct and through
QTR. I
> used a 17" roll. The paper size was custom 17x14 as a portrait and
printed
> that way. I did have a "to fit" image box checked. You have the
borderless
> check box ticked in the properties for the Epson driver? As you are
using a
> 13" wide print on a 13" wide paper. 
> 
>  
> 
> Eric Neilsen Photo
> 
> 4101 Commerce Street, Suite 9
> 
> Dallas, TX 75226
> 
> 214 827-8301
> 
>  
> 
> http://ericneilsenphotography.com
> 
> SKype ejprinter
> 
>  
> 
>   _____  
> 
> From: QuadtoneRIP@yahoogroups.com
[mailto:QuadtoneRIP@yahoogroups.com] On
> Behalf Of jurajlipscher
> Sent: Monday, December 03, 2007 9:06 AM
> To: QuadtoneRIP@yahoogroups.com
> Subject: [QuadtoneRIP] Re: Wasting paper on a roll
> 
>  
> 
> Hi Roy
> 
> Thank you for your fast responses!! I am printing on a 13" roll in
> portrait orientation. My paper size is custom: width = 13" (the whole
> width of the roll) and length = 9,45". So as far as I can see I am not
> using too small a paper size and the orientation is correct too.
> 
> I also tried to use the "banner roll" setting instead of "roll" with
> the option "save paper" turned on (in the WINDOWS settings for the
> 4800 printer) to no avail.
> 
> Juraj
> 
>  
> 
> 
> 
> [Non-text portions of this message have been removed]
>