QTR-Quadtone RIP

Tom..I am useing the original printer software.  My experiences have 
shown that after the cartridge is installed but before the completion 
of the replacement process, you then go to the printer icon and 
proceed as discribed.  This has always worked fo me.  Without doing 
the software process first, I would lose a whole cartridge of ink due 
to continued cleaning of the black ink.  I hope this was helpful.

Jim



--- In QuadtoneRIP@yahoogroups.com, "Tom Moore" <rtmlists8888@...> 
wrote:
>
> Hmmm! When I try it, the Epson software won't let me select the 
other ink.
> The matte cart is installed, highlighted in the panel and I can't 
highlight
> the PK entry. I'm using Version 5.50 of the software. What version 
are you
> using?
> 
> Tom Moore
> 
> > -----Original Message-----
> > From: QuadtoneRIP@yahoogroups.com 
[mailto:QuadtoneRIP@yahoogroups.com] On
> > Behalf Of karlla_fed
> > Sent: Monday, January 14, 2008 9:16 PM
> > To: QuadtoneRIP@yahoogroups.com
> > Subject: [QuadtoneRIP] Re: Small chips, big mystery (Epson 2200)
> > 
> > --- In QuadtoneRIP@yahoogroups.com, "cubafotooo" <cubafotooo@> 
wrote:
> > >
> > > --- In QuadtoneRIP@yahoogroups.com, "karlla_fed" <karlla_fed@>
> > > wrote:
> > > This can be frustrating, I know.
> > > Right click 2200 printer icon (Bottom Bar), right click printer
> > > settings, left click maintenance tab, left click printer and 
options
> > > box (Bottom), put curser over black ink choice, then click okay.
> > > Highlighted choice is what is in the printer.  You are good to 
go
> > >
> > 
> > 
> > That worked perfectly!  Thanks so much for the valuable insight 
and
> > saving me from messing with the hardware!
> > 
> >
>