QTR-Quadtone RIP

hi roy - i have followed the procedure outlined below several times.  today i uninstalled 
qtr .... ran disk utility to verify/repair permissions ... installed qtr ...  then patch ... then 
r1800-k7.  one print worked .... then .... printer window says "printing 0% complete"  then 
paper feeds through, no print.


Last login: Tue Feb  5 12:42:44 on ttys000
/Volumes/QTRIP2.5/DiagnosticScript.command ; exit;
Welcome to Darwin!
Macintosh-4:~ laeliaemitchell$ /Volumes/QTRIP2.5/DiagnosticScript.command ; exit;

********************************************************************

**** QuadToneRIP 2.5.2 Diagnostic Script --- Save Output for Analysis ****

********************************************************************

Tue Feb  5 13:49:55 EST 2008

**** System Info ****
Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-
1228.0.2~1/RELEASE_I386

**** Printer Info ****
scheduler is running
system default destination: QuadR1800-K7
device for EPSON_Stylus_Photo_R1800: usb://EPSON/Stylus%20Photo%20R1800?
serial=ND0060507020912540
device for hp_photosmart_7700_series: ///dev/null
device for QuadR1800-K7: usb://EPSON/Stylus%20Photo%20R1800?
serial=ND0060507020912540
EPSON_Stylus_Photo_R1800 accepting requests since Tue Feb  5 12:25:38 2008
hp_photosmart_7700_series accepting requests since Tue Feb  5 10:14:22 2008
QuadR1800-K7 accepting requests since Tue Feb  5 13:49:09 2008
printer EPSON_Stylus_Photo_R1800 is idle.  enabled since Tue Feb  5 12:25:38 2008
printer hp_photosmart_7700_series is idle.  enabled since Tue Feb  5 10:14:22 2008
printer QuadR1800-K7 is idle.  enabled since Tue Feb  5 13:49:09 2008
hp_photosmart_7700_series-897 laeliaemitchell  1324032   Fri Feb  1 14:42:48 2008
QuadR1800-K7-909        laeliaemitchell    17408   Tue Feb  5 13:43:37 2008

**** QTR Programs ****
/usr/local/bin
Quad.pm*	qcurve*		qgamma*		qmerge*		quadcurves*
qacv*		qdensity*	qgraph*		qpart*		quadprofile*
qacvraw*	qdiff*		qlimit*		qplot*
qadd*		qdotgain*	qline*		qspline*

/usr/libexec/cups/filter
quadtoneprint*	quadtoprinter*

**** Plugin Programs ****
total 0
drwxr-xr-x  3 laeliaemitchell  laeliaemitchell  102 May 25  2007 QuadTone.plugin

**** QTR Printer Descriptions ****
/usr/share/cups/model/C
escp2-10000-quad.ppd.gz		escp2-870-quad.ppd.gz
escp2-1160-quad.ppd.gz		escp2-890-quad.ppd.gz
escp2-1200-quad.ppd.gz		escp2-9000-quad.ppd.gz
escp2-1270-quad.ppd.gz		escp2-9500-quad.ppd.gz
escp2-1280-quad.ppd.gz		escp2-9600-quad.ppd.gz
escp2-1290-quad.ppd.gz		escp2-980-quad.ppd.gz
escp2-1400-quad.ppd.gz		escp2-9800-quad.ppd.gz
escp2-2000-quad.ppd.gz		escp2-EX-quad.ppd.gz
escp2-2100-quad.ppd.gz		escp2-R1800-quad.ppd.gz
escp2-2200-quad.ppd.gz		escp2-R200-quad.ppd.gz
escp2-3000-quad.ppd.gz		escp2-R220-quad.ppd.gz
escp2-3800-quad.ppd.gz		escp2-R2400-quad.ppd.gz
escp2-4000-quad.ppd.gz		escp2-R260-quad.ppd.gz
escp2-4800-quad.ppd.gz		escp2-R300-quad.ppd.gz
escp2-7000-quad.ppd.gz		escp2-R320-quad.ppd.gz
escp2-7500-quad.ppd.gz		escp2-R340-quad.ppd.gz
escp2-7600-quad.ppd.gz		escp2-R380-quad.ppd.gz
escp2-7800-quad.ppd.gz		escp2-R800-quad.ppd.gz
escp2-860-quad.ppd.gz

**** QTR Profiles ****
K7-2880-BradfordBCoolMatte.quad		K7-2880-IPCanvas.quad
K7-2880-BradfordRBrightW.quad		K7-2880-IPPictRagCool.quad
K7-2880-BradfordRBrilliantWD.quad	K7-2880-IPPictRagWarm.quad
K7-2880-BradfordRNaturalW.quad		K7-2880-IPPrintPlusM.quad
K7-2880-EpEnhancedMatte.quad		K7-2880-IPVelvet.quad
K7-2880-EpMatteHW.quad			K7-2880-InnovaColdPressArt.quad
K7-2880-HanAlbrechtDurer.quad		K7-2880-InnovaPhotoFibaP.quad
K7-2880-HanArtProof.quad		K7-2880-InnovaPhotoSmoothC.quad
K7-2880-HanEtching.quad			K7-2880-InnovaSoftTexArt.quad
K7-2880-HanPhotoRag.quad		K7-2880-LgnSomersetPEnhVel.quad
K7-2880-HanPhotoRagBrtW.quad		K7-2880-MoabEntradaFABW.quad
K7-2880-HanPhotoRagSatin.quad		K7-2880-MoabEntradaFANat.quad
K7-2880-HanWhiteVelvet.quad		K7-2880-MoabKayentaPhotoM.quad
K7-2880-HanWilliamTurner.quad

**** USB connections ****
-rwxr-xr-x  1 root  wheel  75152 Sep 28 23:50 /usr/libexec/cups/backend/usb
direct usb://EPSON/Stylus%20Photo%20R1800?serial=ND0060507020912540 "EPSON 
Stylus Photo R1800" "EPSON Stylus Photo R1800 USB" 
"SERN:ND0060507020912540;MFG:EPSON;CMD:ESCPL2,BDC,D4;MDL:Stylus Photo 
R1800;CLS:PRINTER;DES:EPSON Stylus Photo R1800;"

**** CUPS Info ****
E [05/Feb/2008:13:44:27 -0500] [Job 909] Unable to set printer resolution!
N [05/Feb/2008:13:44:27 -0500] [Job 909] stp_get_resolution(v) ||
N [05/Feb/2008:13:44:27 -0500] [Job 909] stp_get_dither_algorithm(v) |Ordered|
N [05/Feb/2008:13:44:27 -0500] [Job 909] GIMP-PRINT w=612 l=9 r=603  h=792 t=783 
b=9
N [05/Feb/2008:13:44:27 -0500] [Job 909] GIMP-PRINT w=5940 l=90 r=90  h=7740 
t=90 b=90
E [05/Feb/2008:13:44:27 -0500] PID 2208 (/usr/libexec/cups/filter/quadtoneprint) 
crashed on signal 10!
I [05/Feb/2008:13:44:27 -0500] Hint: Try setting the LogLevel to "debug" to find out 
more.
E [05/Feb/2008:13:44:28 -0500] [Job 909] Job stopped due to filter errors.
I [05/Feb/2008:13:46:02 -0500] [Job 909] Started filter 
/usr/libexec/cups/filter/pstoappleps (PID 2222)
I [05/Feb/2008:13:46:02 -0500] [Job 909] Started filter 
/usr/libexec/cups/filter/pstocupsraster (PID 2223)
I [05/Feb/2008:13:46:02 -0500] [Job 909] Started filter 
/usr/libexec/cups/filter/quadtoneprint (PID 2224)
I [05/Feb/2008:13:46:02 -0500] [Job 909] Started backend 
/usr/libexec/cups/backend/usb (PID 2225)
I [05/Feb/2008:13:46:02 -0500] [Job 909] Restarted by "laeliaemitchell".
N [05/Feb/2008:13:46:02 -0500] [Job 909] HWResolution = [ 720 720 ]
N [05/Feb/2008:13:46:02 -0500] [Job 909] ImagingBoundingBox = [ 9 9 603 783 ]
N [05/Feb/2008:13:46:02 -0500] [Job 909] Margins = [ 9 9 ]
N [05/Feb/2008:13:46:02 -0500] [Job 909] PageSize = [ 612 792 ]
N [05/Feb/2008:13:46:02 -0500] [Job 909] cupsWidth = 5940
N [05/Feb/2008:13:46:02 -0500] [Job 909] cupsHeight = 7740
E [05/Feb/2008:13:46:02 -0500] [Job 909] Unable to set printer resolution!
N [05/Feb/2008:13:46:02 -0500] [Job 909] stp_get_resolution(v) ||
N [05/Feb/2008:13:46:02 -0500] [Job 909] stp_get_dither_algorithm(v) |Ordered|
N [05/Feb/2008:13:46:02 -0500] [Job 909] GIMP-PRINT w=612 l=9 r=603  h=792 t=783 
b=9
N [05/Feb/2008:13:46:02 -0500] [Job 909] GIMP-PRINT w=5940 l=90 r=90  h=7740 
t=90 b=90
E [05/Feb/2008:13:46:03 -0500] PID 2224 (/usr/libexec/cups/filter/quadtoneprint) 
crashed on signal 10!
I [05/Feb/2008:13:46:03 -0500] Hint: Try setting the LogLevel to "debug" to find out 
more.
E [05/Feb/2008:13:46:04 -0500] [Job 909] Job stopped due to filter errors.
I [05/Feb/2008:13:47:05 -0500] [Job 910] Adding start banner page "none".
I [05/Feb/2008:13:47:05 -0500] [Job 910] Adding job file of type application/pdf.
I [05/Feb/2008:13:47:05 -0500] [Job 910] Queued on "QuadR1800-K7" by 
"laeliaemitchell".
I [05/Feb/2008:13:47:05 -0500] [Job 910] Started filter 
/usr/libexec/cups/filter/cgpdftoraster (PID 2235)
I [05/Feb/2008:13:47:05 -0500] [Job 910] Started filter 
/usr/libexec/cups/filter/quadtoneprint (PID 2236)
I [05/Feb/2008:13:47:05 -0500] [Job 910] Started backend 
/usr/libexec/cups/backend/usb (PID 2237)
N [05/Feb/2008:13:47:05 -0500] [Job 910] QuadToneRIP: using curve K7-2880-
MoabEntradaFABW
N [05/Feb/2008:13:47:05 -0500] [Job 910] QuadToneRIP: using curve K7-2880-
MoabEntradaFABW
N [05/Feb/2008:13:47:05 -0500] [Job 910] QuadToneRIP: using curve K7-2880-
MoabEntradaFABW
N [05/Feb/2008:13:47:05 -0500] [Job 910] QTR using curve file K7-2880-
MoabEntradaFABW
N [05/Feb/2008:13:47:05 -0500] [Job 910] QTR using curve file K7-2880-
MoabEntradaFABW
N [05/Feb/2008:13:47:05 -0500] [Job 910] QTR using curve file K7-2880-
MoabEntradaFABW
N [05/Feb/2008:13:47:05 -0500] [Job 910] HWResolution = [ 720 720 ]
N [05/Feb/2008:13:47:05 -0500] [Job 910] ImagingBoundingBox = [ 9 9 927 1359 ]
N [05/Feb/2008:13:47:05 -0500] [Job 910] Margins = [ 9 9 ]
N [05/Feb/2008:13:47:05 -0500] [Job 910] PageSize = [ 936 1368 ]
N [05/Feb/2008:13:47:05 -0500] [Job 910] cupsWidth = 9180
N [05/Feb/2008:13:47:05 -0500] [Job 910] cupsHeight = 13500
N [05/Feb/2008:13:47:05 -0500] [Job 910] stp_get_resolution(v) |2880|
N [05/Feb/2008:13:47:05 -0500] [Job 910] stp_get_dither_algorithm(v) |Ordered|
N [05/Feb/2008:13:47:05 -0500] [Job 910] GIMP-PRINT w=936 l=9 r=927  h=1368 
t=1359 b=9
N [05/Feb/2008:13:47:05 -0500] [Job 910] GIMP-PRINT w=9180 l=90 r=90  h=13500 
t=90 b=90
I [05/Feb/2008:13:49:09 -0500] [Job 910] Completed successfully.

********************************************************************

**** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****

********************************************************************

logout

[Process completed]




--- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@...> wrote:
>
> I don't know why you still seem to be having trouble.
> If you've done things "many, many times" I suspect it's unclear what order you
> may have done it.
> 
> First clean up what you have -- Delete any Quad printers you have
> using Printer Setup.
> Second make sure the printer is plugged into the USB port.
> 
> Then there are 3 things that must be done in order:
> 1) Install-QTR-2.5.2
> 2) Install the Patch for Leopard
> 3) InstallR1800-K7
> 
> Roy
> 
> On Feb 4, 2008 3:08 PM, studio9chik <fotochik@...> wrote:
> > i, too, have not been able to use qtr with leopard.  i run an epson r1800 w/piezo inks.  
i
> > tried uninstalling reinstalling many, many times.  finally gave up and use another 
computer
> > that runs 10.4 in order to print.
> >
> > big bummer!
> >
> >
> > --- In QuadtoneRIP@yahoogroups.com, "peter tucker" <peter@> wrote:
> > >
> > > I've just moved to a Mac, installed QTR 2.5.2 then patch, then run
> > > install script for 2200. Tried printing - job appears in queue and
> > > then disappears. I ran the diagnostics script and noticed that there
> > > seems to be a permissions issue.
> > >
> > > Suggestion?
> > >
> > > ********************************************************************
> > >
> > > **** QuadToneRIP 2.5.2 Diagnostic Script --- Save Output for Analysis ****
> > >
> > > ********************************************************************
> > >
> > > Sat  2 Feb 2008 16:23:14 PST
> > >
> > > **** System Info ****
> > > Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007;
> > > root:xnu-1228.0.2~1/RELEASE_I386
> > >
> > > **** Printer Info ****
> > > scheduler is running
> > > system default destination: Quad2200
> > > device for Brother_HL_4040CN_series:
> > > mdns://Brother%20HL-4040CN%20series._printer._tcp.local.
> > > device for Quad2200: /dev/null
> > > device for Stylus_Photo_2200__FW_: ///dev/null
> > > Brother_HL_4040CN_series accepting requests since Fri  7 Dec 10:07:05 2007
> > > Quad2200 accepting requests since Sat  2 Feb 16:16:05 2008
> > > Stylus_Photo_2200__FW_ accepting requests since Sun 20 Jan 16:23:37 2008
> > > printer Brother_HL_4040CN_series is idle.  enabled since Fri  7 Dec
> > > 10:07:05 2007
> > > printer Quad2200 is idle.  enabled since Sat  2 Feb 16:16:05 2008
> > > printer Stylus_Photo_2200__FW_ is idle.  enabled since Sun 20 Jan
> > > 16:23:37 2008
> > >
> > > **** QTR Programs ****
> > > /usr/local/bin
> > > Quad.pm*      qcurve*         qgamma*         qmerge*         quadcurves*
> > > qacv*         qdensity*       qgraph*         qpart*          quadprofile*
> > > qacvraw*      qdiff*          qlimit*         qplot*
> > > qadd*         qdotgain*       qline*          qspline*
> > >
> > > /usr/libexec/cups/filter
> > > quadtoneprint*        quadtoprinter*
> > >
> > > **** Plugin Programs ****
> > > total 0
> > > drwxrwxr-x  3 root   admin  102  6 Oct 15:17 AdobePDFPDE800.plugin
> > > drwxr-xr-x  3 peter  peter  102 23 Feb  2007 QuadTone.plugin
> > >
> > > **** QTR Printer Descriptions ****
> > > /usr/share/cups/model/C
> > > escp2-10000-quad.ppd.gz               escp2-870-quad.ppd.gz
> > > escp2-1160-quad.ppd.gz                escp2-890-quad.ppd.gz
> > > escp2-1200-quad.ppd.gz                escp2-9000-quad.ppd.gz
> > > escp2-1270-quad.ppd.gz                escp2-9500-quad.ppd.gz
> > > escp2-1280-quad.ppd.gz                escp2-9600-quad.ppd.gz
> > > escp2-1290-quad.ppd.gz                escp2-980-quad.ppd.gz
> > > escp2-1400-quad.ppd.gz                escp2-9800-quad.ppd.gz
> > > escp2-2000-quad.ppd.gz                escp2-EX-quad.ppd.gz
> > > escp2-2100-quad.ppd.gz                escp2-R1800-quad.ppd.gz
> > > escp2-2200-quad.ppd.gz                escp2-R200-quad.ppd.gz
> > > escp2-3000-quad.ppd.gz                escp2-R220-quad.ppd.gz
> > > escp2-3800-quad.ppd.gz                escp2-R2400-quad.ppd.gz
> > > escp2-4000-quad.ppd.gz                escp2-R260-quad.ppd.gz
> > > escp2-4800-quad.ppd.gz                escp2-R300-quad.ppd.gz
> > > escp2-7000-quad.ppd.gz                escp2-R320-quad.ppd.gz
> > > escp2-7500-quad.ppd.gz                escp2-R340-quad.ppd.gz
> > > escp2-7600-quad.ppd.gz                escp2-R380-quad.ppd.gz
> > > escp2-7800-quad.ppd.gz                escp2-R800-quad.ppd.gz
> > > escp2-860-quad.ppd.gz
> > >
> > > **** QTR Profiles ****
> > > UC-EEnhMatte-Sepia.quad               UCmk-PMuseumBright-cool.quad
> > > UC-EEnhMatte-cool.quad                UCmk-PMuseumBright-coolSe.quad
> > > UC-EEnhMatte-coolSe.quad      UCmk-PMuseumBright-sepia.quad
> > > UC-EEnhMatte-warm.quad                UCmk-PMuseumBright-warm.quad
> > > UC-NoBlack-neutral.quad               UCpk-EPremSemiGloss-cool.quad
> > > UC-OrientalFB-Sepia.quad      UCpk-EPremSemiGloss-sepia.quad
> > > UC-OrientalFB-cool.quad               UCpk-EPremSemiGloss-warm.quad
> > > UC-OrientalFB-warm.quad               UCpk-MCeramicLuster-cool.quad
> > > UC-PremierFineArt-Sepia.quad  UCpk-MCeramicLuster-sepia.quad
> > > UC-PremierFineArt-cool.quad   UCpk-MCeramicLuster-warm.quad
> > > UC-PremierFineArt-warm.quad   UCpk-PermaJetOyster-cool.quad
> > > UCmk-MEntradaNatural-cool.quad        UCpk-PermaJetOyster-sepia.quad
> > > UCmk-MEntradaNatural-sepia.quad       UCpk-PermaJetOyster-warm.quad
> > > UCmk-MEntradaNatural-warm.quad
> > >
> > > **** USB connections ****
> > > -rwxr-xr-x  1 root  wheel  75152 28 Sep 20:50
> > > /usr/libexec/cups/backend/usb
> > >
> > > **** CUPS Info ****
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] Margins = [ 9 9 ]
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] PageSize = [ 612 792 ]
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] cupsWidth = 5940
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] cupsHeight = 7740
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] stp_get_resolution(v) |1440|
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] stp_get_dither_algorithm(v)
> > > |Ordered|
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] GIMP-PRINT w=612 l=9 r=603
> > > h=792 t=783 b=9
> > > N [02/Feb/2008:16:07:31 -0800] [Job 142] GIMP-PRINT w=5940 l=90 r=90
> > > h=7740 t=90 b=90
> > > I [02/Feb/2008:16:07:50 -0800] [Job 142] Completed successfully.
> > > E [02/Feb/2008:16:12:33 -0800] CUPS-Add-Modify-Printer: Unauthorized
> > > I [02/Feb/2008:16:12:33 -0800] Saving printers.conf...
> > > I [02/Feb/2008:16:12:33 -0800] Printer "Quad2200" modified by "root".
> > > I [02/Feb/2008:16:12:33 -0800] Setting Quad2200
> > > printer-is-accepting-jobs to 1 (was 1.)
> > > I [02/Feb/2008:16:12:33 -0800] Setting Quad2200 printer-state to 3
> > > (was 3.)
> > > I [02/Feb/2008:16:12:33 -0800] Saving printers.conf...
> > > I [02/Feb/2008:16:12:33 -0800] Printer "Quad2200" modified by "root".
> > > E [02/Feb/2008:16:12:34 -0800] CUPS-Add-Modify-Printer: Unauthorized
> > > I [02/Feb/2008:16:12:34 -0800] Saving printers.conf...
> > > I [02/Feb/2008:16:12:34 -0800] Printer "Quad2200" modified by "root".
> > > E [02/Feb/2008:16:13:43 -0800] CUPS-Add-Modify-Printer: Unauthorized
> > > I [02/Feb/2008:16:13:43 -0800] Saving printers.conf...
> > > I [02/Feb/2008:16:13:43 -0800] Printer "Quad2200" modified by "root".
> > > I [02/Feb/2008:16:13:43 -0800] Setting Quad2200
> > > printer-is-accepting-jobs to 1 (was 1.)
> > > I [02/Feb/2008:16:13:43 -0800] Setting Quad2200 printer-state to 3
> > > (was 3.)
> > > I [02/Feb/2008:16:13:43 -0800] Saving printers.conf...
> > > I [02/Feb/2008:16:13:43 -0800] Printer "Quad2200" modified by "root".
> > > E [02/Feb/2008:16:13:52 -0800] CUPS-Add-Modify-Printer: Unauthorized
> > > I [02/Feb/2008:16:13:52 -0800] Saving printers.conf...
> > > I [02/Feb/2008:16:13:52 -0800] Printer "Quad2200" modified by "root".
> > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Adding start banner page "none".
> > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Adding job file of type
> > > application/pdf.
> > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Adding end banner page "none".
> > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Queued on "Quad2200" by "peter".
> > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Started filter
> > > /usr/libexec/cups/filter/cgpdftoraster (PID 4547)
> > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Started filter
> > > /usr/libexec/cups/filter/quadtoneprint (PID 4548)
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QuadToneRIP: using curve
> > > UCpk-EPremSemiGloss-warm
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QuadToneRIP: using curve
> > > UCpk-EPremSemiGloss-cool
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QTR using curve file
> > > UCpk-EPremSemiGloss-warm
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QTR using curve file
> > > UCpk-EPremSemiGloss-cool
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] HWResolution = [ 720 720 ]
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] ImagingBoundingBox = [ 9 9
> > > 603 783 ]
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] Margins = [ 9 9 ]
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] PageSize = [ 612 792 ]
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] cupsWidth = 5940
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] cupsHeight = 7740
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] stp_get_resolution(v) |1440|
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] stp_get_dither_algorithm(v)
> > > |Ordered|
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] GIMP-PRINT w=612 l=9 r=603
> > > h=792 t=783 b=9
> > > N [02/Feb/2008:16:15:46 -0800] [Job 143] GIMP-PRINT w=5940 l=90 r=90
> > > h=7740 t=90 b=90
> > > I [02/Feb/2008:16:16:05 -0800] [Job 143] Completed successfully.
> > >
> > > ********************************************************************
> > >
> > > **** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****
> > >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>