Ok, the diag output has some interesting info. It looks like the last print attempt may have worked -- it says: "Completed successfully." Previous ones have an error in the print resolution. Do you have any Printer Presets from the past? If so Delete them and recreate them. Especially re-select the Resolution field. Also when you print, are there other print dialog panes that may be for a specific other printer? I'm mostly interested in one that might have a Resolution field. Roy On Feb 5, 2008 10:53 AM, studio9chik <fotochik@...> wrote: > hi roy - i have followed the procedure outlined below several times. today i uninstalled > qtr .... ran disk utility to verify/repair permissions ... installed qtr ... then patch ... then > r1800-k7. one print worked .... then .... printer window says "printing 0% complete" then > paper feeds through, no print. > > > Last login: Tue Feb 5 12:42:44 on ttys000 > /Volumes/QTRIP2.5/DiagnosticScript.command ; exit; > Welcome to Darwin! > Macintosh-4:~ laeliaemitchell$ /Volumes/QTRIP2.5/DiagnosticScript.command ; exit; > > ******************************************************************** > > **** QuadToneRIP 2.5.2 Diagnostic Script --- Save Output for Analysis **** > > ******************************************************************** > > Tue Feb 5 13:49:55 EST 2008 > > **** System Info **** > Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu- > 1228.0.2~1/RELEASE_I386 > > **** Printer Info **** > scheduler is running > system default destination: QuadR1800-K7 > device for EPSON_Stylus_Photo_R1800: usb://EPSON/Stylus%20Photo%20R1800? > serial=ND0060507020912540 > device for hp_photosmart_7700_series: ///dev/null > device for QuadR1800-K7: usb://EPSON/Stylus%20Photo%20R1800? > serial=ND0060507020912540 > EPSON_Stylus_Photo_R1800 accepting requests since Tue Feb 5 12:25:38 2008 > hp_photosmart_7700_series accepting requests since Tue Feb 5 10:14:22 2008 > QuadR1800-K7 accepting requests since Tue Feb 5 13:49:09 2008 > printer EPSON_Stylus_Photo_R1800 is idle. enabled since Tue Feb 5 12:25:38 2008 > printer hp_photosmart_7700_series is idle. enabled since Tue Feb 5 10:14:22 2008 > printer QuadR1800-K7 is idle. enabled since Tue Feb 5 13:49:09 2008 > hp_photosmart_7700_series-897 laeliaemitchell 1324032 Fri Feb 1 14:42:48 2008 > QuadR1800-K7-909 laeliaemitchell 17408 Tue Feb 5 13:43:37 2008 > > **** QTR Programs **** > /usr/local/bin > Quad.pm* qcurve* qgamma* qmerge* quadcurves* > qacv* qdensity* qgraph* qpart* quadprofile* > qacvraw* qdiff* qlimit* qplot* > qadd* qdotgain* qline* qspline* > > /usr/libexec/cups/filter > quadtoneprint* quadtoprinter* > > **** Plugin Programs **** > total 0 > drwxr-xr-x 3 laeliaemitchell laeliaemitchell 102 May 25 2007 QuadTone.plugin > > **** QTR Printer Descriptions **** > /usr/share/cups/model/C > escp2-10000-quad.ppd.gz escp2-870-quad.ppd.gz > escp2-1160-quad.ppd.gz escp2-890-quad.ppd.gz > escp2-1200-quad.ppd.gz escp2-9000-quad.ppd.gz > escp2-1270-quad.ppd.gz escp2-9500-quad.ppd.gz > escp2-1280-quad.ppd.gz escp2-9600-quad.ppd.gz > escp2-1290-quad.ppd.gz escp2-980-quad.ppd.gz > escp2-1400-quad.ppd.gz escp2-9800-quad.ppd.gz > escp2-2000-quad.ppd.gz escp2-EX-quad.ppd.gz > escp2-2100-quad.ppd.gz escp2-R1800-quad.ppd.gz > escp2-2200-quad.ppd.gz escp2-R200-quad.ppd.gz > escp2-3000-quad.ppd.gz escp2-R220-quad.ppd.gz > escp2-3800-quad.ppd.gz escp2-R2400-quad.ppd.gz > escp2-4000-quad.ppd.gz escp2-R260-quad.ppd.gz > escp2-4800-quad.ppd.gz escp2-R300-quad.ppd.gz > escp2-7000-quad.ppd.gz escp2-R320-quad.ppd.gz > escp2-7500-quad.ppd.gz escp2-R340-quad.ppd.gz > escp2-7600-quad.ppd.gz escp2-R380-quad.ppd.gz > escp2-7800-quad.ppd.gz escp2-R800-quad.ppd.gz > escp2-860-quad.ppd.gz > > **** QTR Profiles **** > K7-2880-BradfordBCoolMatte.quad K7-2880-IPCanvas.quad > K7-2880-BradfordRBrightW.quad K7-2880-IPPictRagCool.quad > K7-2880-BradfordRBrilliantWD.quad K7-2880-IPPictRagWarm.quad > K7-2880-BradfordRNaturalW.quad K7-2880-IPPrintPlusM.quad > K7-2880-EpEnhancedMatte.quad K7-2880-IPVelvet.quad > K7-2880-EpMatteHW.quad K7-2880-InnovaColdPressArt.quad > K7-2880-HanAlbrechtDurer.quad K7-2880-InnovaPhotoFibaP.quad > K7-2880-HanArtProof.quad K7-2880-InnovaPhotoSmoothC.quad > K7-2880-HanEtching.quad K7-2880-InnovaSoftTexArt.quad > K7-2880-HanPhotoRag.quad K7-2880-LgnSomersetPEnhVel.quad > K7-2880-HanPhotoRagBrtW.quad K7-2880-MoabEntradaFABW.quad > K7-2880-HanPhotoRagSatin.quad K7-2880-MoabEntradaFANat.quad > K7-2880-HanWhiteVelvet.quad K7-2880-MoabKayentaPhotoM.quad > K7-2880-HanWilliamTurner.quad > > **** USB connections **** > -rwxr-xr-x 1 root wheel 75152 Sep 28 23:50 /usr/libexec/cups/backend/usb > direct usb://EPSON/Stylus%20Photo%20R1800?serial=ND0060507020912540 "EPSON > Stylus Photo R1800" "EPSON Stylus Photo R1800 USB" > "SERN:ND0060507020912540;MFG:EPSON;CMD:ESCPL2,BDC,D4;MDL:Stylus Photo > R1800;CLS:PRINTER;DES:EPSON Stylus Photo R1800;" > > **** CUPS Info **** > E [05/Feb/2008:13:44:27 -0500] [Job 909] Unable to set printer resolution! > N [05/Feb/2008:13:44:27 -0500] [Job 909] stp_get_resolution(v) || > N [05/Feb/2008:13:44:27 -0500] [Job 909] stp_get_dither_algorithm(v) |Ordered| > N [05/Feb/2008:13:44:27 -0500] [Job 909] GIMP-PRINT w=612 l=9 r=603 h=792 t=783 > b=9 > N [05/Feb/2008:13:44:27 -0500] [Job 909] GIMP-PRINT w=5940 l=90 r=90 h=7740 > t=90 b=90 > E [05/Feb/2008:13:44:27 -0500] PID 2208 (/usr/libexec/cups/filter/quadtoneprint) > crashed on signal 10! > I [05/Feb/2008:13:44:27 -0500] Hint: Try setting the LogLevel to "debug" to find out > more. > E [05/Feb/2008:13:44:28 -0500] [Job 909] Job stopped due to filter errors. > I [05/Feb/2008:13:46:02 -0500] [Job 909] Started filter > /usr/libexec/cups/filter/pstoappleps (PID 2222) > I [05/Feb/2008:13:46:02 -0500] [Job 909] Started filter > /usr/libexec/cups/filter/pstocupsraster (PID 2223) > I [05/Feb/2008:13:46:02 -0500] [Job 909] Started filter > /usr/libexec/cups/filter/quadtoneprint (PID 2224) > I [05/Feb/2008:13:46:02 -0500] [Job 909] Started backend > /usr/libexec/cups/backend/usb (PID 2225) > I [05/Feb/2008:13:46:02 -0500] [Job 909] Restarted by "laeliaemitchell". > N [05/Feb/2008:13:46:02 -0500] [Job 909] HWResolution = [ 720 720 ] > N [05/Feb/2008:13:46:02 -0500] [Job 909] ImagingBoundingBox = [ 9 9 603 783 ] > N [05/Feb/2008:13:46:02 -0500] [Job 909] Margins = [ 9 9 ] > N [05/Feb/2008:13:46:02 -0500] [Job 909] PageSize = [ 612 792 ] > N [05/Feb/2008:13:46:02 -0500] [Job 909] cupsWidth = 5940 > N [05/Feb/2008:13:46:02 -0500] [Job 909] cupsHeight = 7740 > E [05/Feb/2008:13:46:02 -0500] [Job 909] Unable to set printer resolution! > N [05/Feb/2008:13:46:02 -0500] [Job 909] stp_get_resolution(v) || > N [05/Feb/2008:13:46:02 -0500] [Job 909] stp_get_dither_algorithm(v) |Ordered| > N [05/Feb/2008:13:46:02 -0500] [Job 909] GIMP-PRINT w=612 l=9 r=603 h=792 t=783 > b=9 > N [05/Feb/2008:13:46:02 -0500] [Job 909] GIMP-PRINT w=5940 l=90 r=90 h=7740 > t=90 b=90 > E [05/Feb/2008:13:46:03 -0500] PID 2224 (/usr/libexec/cups/filter/quadtoneprint) > crashed on signal 10! > I [05/Feb/2008:13:46:03 -0500] Hint: Try setting the LogLevel to "debug" to find out > more. > E [05/Feb/2008:13:46:04 -0500] [Job 909] Job stopped due to filter errors. > I [05/Feb/2008:13:47:05 -0500] [Job 910] Adding start banner page "none". > I [05/Feb/2008:13:47:05 -0500] [Job 910] Adding job file of type application/pdf. > I [05/Feb/2008:13:47:05 -0500] [Job 910] Queued on "QuadR1800-K7" by > "laeliaemitchell". > I [05/Feb/2008:13:47:05 -0500] [Job 910] Started filter > /usr/libexec/cups/filter/cgpdftoraster (PID 2235) > I [05/Feb/2008:13:47:05 -0500] [Job 910] Started filter > /usr/libexec/cups/filter/quadtoneprint (PID 2236) > I [05/Feb/2008:13:47:05 -0500] [Job 910] Started backend > /usr/libexec/cups/backend/usb (PID 2237) > N [05/Feb/2008:13:47:05 -0500] [Job 910] QuadToneRIP: using curve K7-2880- > MoabEntradaFABW > N [05/Feb/2008:13:47:05 -0500] [Job 910] QuadToneRIP: using curve K7-2880- > MoabEntradaFABW > N [05/Feb/2008:13:47:05 -0500] [Job 910] QuadToneRIP: using curve K7-2880- > MoabEntradaFABW > N [05/Feb/2008:13:47:05 -0500] [Job 910] QTR using curve file K7-2880- > MoabEntradaFABW > N [05/Feb/2008:13:47:05 -0500] [Job 910] QTR using curve file K7-2880- > MoabEntradaFABW > N [05/Feb/2008:13:47:05 -0500] [Job 910] QTR using curve file K7-2880- > MoabEntradaFABW > N [05/Feb/2008:13:47:05 -0500] [Job 910] HWResolution = [ 720 720 ] > N [05/Feb/2008:13:47:05 -0500] [Job 910] ImagingBoundingBox = [ 9 9 927 1359 ] > N [05/Feb/2008:13:47:05 -0500] [Job 910] Margins = [ 9 9 ] > N [05/Feb/2008:13:47:05 -0500] [Job 910] PageSize = [ 936 1368 ] > N [05/Feb/2008:13:47:05 -0500] [Job 910] cupsWidth = 9180 > N [05/Feb/2008:13:47:05 -0500] [Job 910] cupsHeight = 13500 > N [05/Feb/2008:13:47:05 -0500] [Job 910] stp_get_resolution(v) |2880| > N [05/Feb/2008:13:47:05 -0500] [Job 910] stp_get_dither_algorithm(v) |Ordered| > N [05/Feb/2008:13:47:05 -0500] [Job 910] GIMP-PRINT w=936 l=9 r=927 h=1368 > t=1359 b=9 > N [05/Feb/2008:13:47:05 -0500] [Job 910] GIMP-PRINT w=9180 l=90 r=90 h=13500 > t=90 b=90 > I [05/Feb/2008:13:49:09 -0500] [Job 910] Completed successfully. > > ******************************************************************** > > **** QuadToneRIP Diagnostic Script --- Save Output for Analysis **** > > ******************************************************************** > > logout > > [Process completed] > > > > > --- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@...> wrote: > > > > I don't know why you still seem to be having trouble. > > If you've done things "many, many times" I suspect it's unclear what order you > > may have done it. > > > > First clean up what you have -- Delete any Quad printers you have > > using Printer Setup. > > Second make sure the printer is plugged into the USB port. > > > > Then there are 3 things that must be done in order: > > 1) Install-QTR-2.5.2 > > 2) Install the Patch for Leopard > > 3) InstallR1800-K7 > > > > Roy > > > > > On Feb 4, 2008 3:08 PM, studio9chik <fotochik@...> wrote: > > > i, too, have not been able to use qtr with leopard. i run an epson r1800 w/piezo inks. > i > > > tried uninstalling reinstalling many, many times. finally gave up and use another > computer > > > that runs 10.4 in order to print. > > > > > > big bummer! > > > > > > > > > --- In QuadtoneRIP@yahoogroups.com, "peter tucker" <peter@> wrote: > > > > > > > > I've just moved to a Mac, installed QTR 2.5.2 then patch, then run > > > > install script for 2200. Tried printing - job appears in queue and > > > > then disappears. I ran the diagnostics script and noticed that there > > > > seems to be a permissions issue. > > > > > > > > Suggestion? > > > > > > > > ******************************************************************** > > > > > > > > **** QuadToneRIP 2.5.2 Diagnostic Script --- Save Output for Analysis **** > > > > > > > > ******************************************************************** > > > > > > > > Sat 2 Feb 2008 16:23:14 PST > > > > > > > > **** System Info **** > > > > Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; > > > > root:xnu-1228.0.2~1/RELEASE_I386 > > > > > > > > **** Printer Info **** > > > > scheduler is running > > > > system default destination: Quad2200 > > > > device for Brother_HL_4040CN_series: > > > > mdns://Brother%20HL-4040CN%20series._printer._tcp.local. > > > > device for Quad2200: /dev/null > > > > device for Stylus_Photo_2200__FW_: ///dev/null > > > > Brother_HL_4040CN_series accepting requests since Fri 7 Dec 10:07:05 2007 > > > > Quad2200 accepting requests since Sat 2 Feb 16:16:05 2008 > > > > Stylus_Photo_2200__FW_ accepting requests since Sun 20 Jan 16:23:37 2008 > > > > printer Brother_HL_4040CN_series is idle. enabled since Fri 7 Dec > > > > 10:07:05 2007 > > > > printer Quad2200 is idle. enabled since Sat 2 Feb 16:16:05 2008 > > > > printer Stylus_Photo_2200__FW_ is idle. enabled since Sun 20 Jan > > > > 16:23:37 2008 > > > > > > > > **** QTR Programs **** > > > > /usr/local/bin > > > > Quad.pm* qcurve* qgamma* qmerge* quadcurves* > > > > qacv* qdensity* qgraph* qpart* quadprofile* > > > > qacvraw* qdiff* qlimit* qplot* > > > > qadd* qdotgain* qline* qspline* > > > > > > > > /usr/libexec/cups/filter > > > > quadtoneprint* quadtoprinter* > > > > > > > > **** Plugin Programs **** > > > > total 0 > > > > drwxrwxr-x 3 root admin 102 6 Oct 15:17 AdobePDFPDE800.plugin > > > > drwxr-xr-x 3 peter peter 102 23 Feb 2007 QuadTone.plugin > > > > > > > > **** QTR Printer Descriptions **** > > > > /usr/share/cups/model/C > > > > escp2-10000-quad.ppd.gz escp2-870-quad.ppd.gz > > > > escp2-1160-quad.ppd.gz escp2-890-quad.ppd.gz > > > > escp2-1200-quad.ppd.gz escp2-9000-quad.ppd.gz > > > > escp2-1270-quad.ppd.gz escp2-9500-quad.ppd.gz > > > > escp2-1280-quad.ppd.gz escp2-9600-quad.ppd.gz > > > > escp2-1290-quad.ppd.gz escp2-980-quad.ppd.gz > > > > escp2-1400-quad.ppd.gz escp2-9800-quad.ppd.gz > > > > escp2-2000-quad.ppd.gz escp2-EX-quad.ppd.gz > > > > escp2-2100-quad.ppd.gz escp2-R1800-quad.ppd.gz > > > > escp2-2200-quad.ppd.gz escp2-R200-quad.ppd.gz > > > > escp2-3000-quad.ppd.gz escp2-R220-quad.ppd.gz > > > > escp2-3800-quad.ppd.gz escp2-R2400-quad.ppd.gz > > > > escp2-4000-quad.ppd.gz escp2-R260-quad.ppd.gz > > > > escp2-4800-quad.ppd.gz escp2-R300-quad.ppd.gz > > > > escp2-7000-quad.ppd.gz escp2-R320-quad.ppd.gz > > > > escp2-7500-quad.ppd.gz escp2-R340-quad.ppd.gz > > > > escp2-7600-quad.ppd.gz escp2-R380-quad.ppd.gz > > > > escp2-7800-quad.ppd.gz escp2-R800-quad.ppd.gz > > > > escp2-860-quad.ppd.gz > > > > > > > > **** QTR Profiles **** > > > > UC-EEnhMatte-Sepia.quad UCmk-PMuseumBright-cool.quad > > > > UC-EEnhMatte-cool.quad UCmk-PMuseumBright-coolSe.quad > > > > UC-EEnhMatte-coolSe.quad UCmk-PMuseumBright-sepia.quad > > > > UC-EEnhMatte-warm.quad UCmk-PMuseumBright-warm.quad > > > > UC-NoBlack-neutral.quad UCpk-EPremSemiGloss-cool.quad > > > > UC-OrientalFB-Sepia.quad UCpk-EPremSemiGloss-sepia.quad > > > > UC-OrientalFB-cool.quad UCpk-EPremSemiGloss-warm.quad > > > > UC-OrientalFB-warm.quad UCpk-MCeramicLuster-cool.quad > > > > UC-PremierFineArt-Sepia.quad UCpk-MCeramicLuster-sepia.quad > > > > UC-PremierFineArt-cool.quad UCpk-MCeramicLuster-warm.quad > > > > UC-PremierFineArt-warm.quad UCpk-PermaJetOyster-cool.quad > > > > UCmk-MEntradaNatural-cool.quad UCpk-PermaJetOyster-sepia.quad > > > > UCmk-MEntradaNatural-sepia.quad UCpk-PermaJetOyster-warm.quad > > > > UCmk-MEntradaNatural-warm.quad > > > > > > > > **** USB connections **** > > > > -rwxr-xr-x 1 root wheel 75152 28 Sep 20:50 > > > > /usr/libexec/cups/backend/usb > > > > > > > > **** CUPS Info **** > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] Margins = [ 9 9 ] > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] PageSize = [ 612 792 ] > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] cupsWidth = 5940 > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] cupsHeight = 7740 > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] stp_get_resolution(v) |1440| > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] stp_get_dither_algorithm(v) > > > > |Ordered| > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] GIMP-PRINT w=612 l=9 r=603 > > > > h=792 t=783 b=9 > > > > N [02/Feb/2008:16:07:31 -0800] [Job 142] GIMP-PRINT w=5940 l=90 r=90 > > > > h=7740 t=90 b=90 > > > > I [02/Feb/2008:16:07:50 -0800] [Job 142] Completed successfully. > > > > E [02/Feb/2008:16:12:33 -0800] CUPS-Add-Modify-Printer: Unauthorized > > > > I [02/Feb/2008:16:12:33 -0800] Saving printers.conf... > > > > I [02/Feb/2008:16:12:33 -0800] Printer "Quad2200" modified by "root". > > > > I [02/Feb/2008:16:12:33 -0800] Setting Quad2200 > > > > printer-is-accepting-jobs to 1 (was 1.) > > > > I [02/Feb/2008:16:12:33 -0800] Setting Quad2200 printer-state to 3 > > > > (was 3.) > > > > I [02/Feb/2008:16:12:33 -0800] Saving printers.conf... > > > > I [02/Feb/2008:16:12:33 -0800] Printer "Quad2200" modified by "root". > > > > E [02/Feb/2008:16:12:34 -0800] CUPS-Add-Modify-Printer: Unauthorized > > > > I [02/Feb/2008:16:12:34 -0800] Saving printers.conf... > > > > I [02/Feb/2008:16:12:34 -0800] Printer "Quad2200" modified by "root". > > > > E [02/Feb/2008:16:13:43 -0800] CUPS-Add-Modify-Printer: Unauthorized > > > > I [02/Feb/2008:16:13:43 -0800] Saving printers.conf... > > > > I [02/Feb/2008:16:13:43 -0800] Printer "Quad2200" modified by "root". > > > > I [02/Feb/2008:16:13:43 -0800] Setting Quad2200 > > > > printer-is-accepting-jobs to 1 (was 1.) > > > > I [02/Feb/2008:16:13:43 -0800] Setting Quad2200 printer-state to 3 > > > > (was 3.) > > > > I [02/Feb/2008:16:13:43 -0800] Saving printers.conf... > > > > I [02/Feb/2008:16:13:43 -0800] Printer "Quad2200" modified by "root". > > > > E [02/Feb/2008:16:13:52 -0800] CUPS-Add-Modify-Printer: Unauthorized > > > > I [02/Feb/2008:16:13:52 -0800] Saving printers.conf... > > > > I [02/Feb/2008:16:13:52 -0800] Printer "Quad2200" modified by "root". > > > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Adding start banner page "none". > > > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Adding job file of type > > > > application/pdf. > > > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Adding end banner page "none". > > > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Queued on "Quad2200" by "peter". > > > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Started filter > > > > /usr/libexec/cups/filter/cgpdftoraster (PID 4547) > > > > I [02/Feb/2008:16:15:46 -0800] [Job 143] Started filter > > > > /usr/libexec/cups/filter/quadtoneprint (PID 4548) > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QuadToneRIP: using curve > > > > UCpk-EPremSemiGloss-warm > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QuadToneRIP: using curve > > > > UCpk-EPremSemiGloss-cool > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QTR using curve file > > > > UCpk-EPremSemiGloss-warm > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] QTR using curve file > > > > UCpk-EPremSemiGloss-cool > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] HWResolution = [ 720 720 ] > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] ImagingBoundingBox = [ 9 9 > > > > 603 783 ] > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] Margins = [ 9 9 ] > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] PageSize = [ 612 792 ] > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] cupsWidth = 5940 > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] cupsHeight = 7740 > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] stp_get_resolution(v) |1440| > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] stp_get_dither_algorithm(v) > > > > |Ordered| > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] GIMP-PRINT w=612 l=9 r=603 > > > > h=792 t=783 b=9 > > > > N [02/Feb/2008:16:15:46 -0800] [Job 143] GIMP-PRINT w=5940 l=90 r=90 > > > > h=7740 t=90 b=90 > > > > I [02/Feb/2008:16:16:05 -0800] [Job 143] Completed successfully. > > > > > > > > ******************************************************************** > > > > > > > > **** QuadToneRIP Diagnostic Script --- Save Output for Analysis **** > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > >
Message
Re: [QuadtoneRIP] Re: qtr not printing - mac os x leopard - permissions error?
2008-02-05 by Roy Harrington