QTR-Quadtone RIP

Roy
I reinstalled version 2.5 and tried to print on my Mac (10.4) and 
Epson R1800 3MK system and it works like magic, same as before.  I've 
tried everything I could think of to get v 2.6 to print but have come 
up empty.  I assume there are no improvements that I would notice on 
the 1800 3MK system from v 2.5 to 2.6, is that true?  If so I'll just 
keep using 2.5 and try my curve generation process from there.  Dont 
know if you learned anything from the diagnostic file I sent you.
Regards
Paul

--- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@...> wrote:
>
> Hi Harlan,
> 
> It all sounds good until "I then reset the printer setup utility and
> loaded the printer back in".
> What did you do here?  The Install script should set everything up 
as needed.
> I'd suggest Deleting the printer and re-running the InstallR1800-
3MK script.
> Try things then.  If you are still not getting print output run
> DiagnosticScript and email
> me the text output.
> 
> Paul, if you have the Diag output email me that too so I can see it.
> 
> Roy
> 
> On Mon, Mar 24, 2008 at 10:33 PM, hhchapman4104 <hchapman@...> 
wrote:
> > Hello Paul,
> >  I am having a similar problem with 2.6, no printing.
> >
> >  Am using a Mac OS10.4.11 and an R1800 printing with 3MK.
> >  I hope I got the 2.6 installation right:
> >   The "install R1800-3MK" command loaded the .quad files into the 
new location on my
> >  system drive: library/printers/qtr/quadtone/quadR1800-3MK, I 
think this takes the place
> >  of the old "curve drop box" folder?
> >  I then reset the printer setup utility and loaded the printer 
back in, the utility says it is
> >  using version 2.6. Good so far.
> >  On starting photoshop and printing a .psd file, the qtr print 
utility
> >  behaved normally and brought up the profile choices that were 
loaded into the new system
> >  file.
> >  On printing the printer dialog for quadR1800-3MK comes up empty 
showing no print job
> >  and that is it.
> >
> >  On the bright side for 2.6 the new QTR Curve View app. is 
wonderful!
> >
> >  I know this doesn't help you but hopefully will help for the 
group to assist.
> >  -Harlan
> >
> >
> >
> >
> >
> >   --- In QuadtoneRIP@yahoogroups.com, "p_bien" <p_bien@> wrote:
> >  >
> >  > I downloaded version 2.6 and have tried to calibrate and print
> >  > and the printer icon comes into my toolbar for a few seconds, 
then
> >  > disappears.  No print.  I re-installed and tried to print a 
image I
> >  > just printed last night and same thing, all settings as before.
> >  > Printer icon comes up for a second, then disappears.  No 
print.  I
> >  > also tried to update the Epson enhanced Matt txt file with my 
values of
> >  > the step tablet, saved it then ran it through the Drop-Quad-
Profile.app
> >  > and it comes up with a simple one line error message about 
Line 17.
> >  > Anyone having this problem?
> >  >
> >  > Paul Bien
> >  >
> >
> >
> >  ------------------------------------
> >
> >  Yahoo! Groups Links
> >
> >
> >
> >
>