QTR-Quadtone RIP

Hi Andreas.... are you printing at 2880 dpi?  Printing at 2880 with a curve that was built at 
1440 can darken your print.  If you are printing at 2880 and are using a curve that doesn't 
have 2880 in its name, i.e., is meant to be printing at 1440, then you should set an ink 
limit of -45% in the Quad driver.

Ed

--- In QuadtoneRIP@yahoogroups.com, "nepenthez05" <andreas@w...> wrote:
> Hello,
> 
> I'm usually using ImagePrint but recently gave QuadtoneRIP a try as 
> I'm thinking about reusing a few older printers (1160 and 1290s) that 
> are only collecting dust for BW printing. However, all my prints are 
> far too dark. Ok, I can adjust the gamma and then it works, but I'm 
> wondering if I'm doing something wrong. 
> I tried it for my Epson 2100 and selected the right curves. Of cause 
> my display is calibrated, so I'm sure the files are fine.
> Any help is very welcome.
> 
> Bye
> 
> Andreas