QTR-Quadtone RIP

Chris,

I am very interested in your process as I am also using QTR for  
cyanotype curves on OHP. Though I am printing on an Epson 4000. I have  
not tried printing on 13x19 OHP. However, I am printing 72" long  
panoramas on 17" roll OHP. The first time I did this QTR would only  
print a very small portion of the image. I discovered (with the help  
of this post http://tech.groups.yahoo.com/group/QuadtoneRIP/message/5549) 
  that "document size must be smaller than your page setup size by the  
amount" of the printers default minimum margins. I am not sure this is  
your problem but once I set my custom document size to include the  
printer margins and scaled my image to fit inside those dimensions, it  
worked.

I am also interested in your cyanotype work and the curves you have  
created. If you are inclined give me some details.

Best,

Scott Huette
http://studioyugen.wordpress.com


On Sep 23, 2008, at 12:40 AM, hippolyte_bayard wrote:

> Hello,
>
> I have been testing for a cyanotype curve on OHP for the Epson 4880. I
> printed my tests on 8.5x11" and got really good results. I want to
> print the final results on 13x19" OHP, but every time I initiate a
> print sequence, it stops two inches into the print. IThe printer
> doesn't send an error message. I simply have to halt the printing, or
> wait five minutes for the printer to spit out the film. I was able,
> however, to print the 8.5x11" test file on the 13x19" sheet, but it
> will not permit a full sized image. I'm very frustrated at this point.
>
> I am using the latest QTR and running it on Leopard. I have have
> deinstalled it once now, and threw away all related profile info.
> PLEASE tell me what is going on. I will be very greatfull.
>
> Chris
>
>
> 



[Non-text portions of this message have been removed]