QTR-Quadtone RIP

Thanks! I had figured it out. I was running the script from the wrong location.
Once I moved it - then ran it, my profiles showed up as expected.
Thanks,
Steve

--- In QuadtoneRIP@yahoogroups.com, jerry dungan <jerry_4y@...> wrote:
>
> Steve,
> 
> Try to rerun both the 'InstallScripts" command from the 'Profiles' folder,
> andthe Install-1280 K6.command inside of the 890-1280-1290-K6 folder 
> if you haven't already installed both. I think it takes both. 
> 
> Afterwards take a look in:
> 
> Library-  Printers -  QTR -  Quadtone -   Quad1280-K6 to see if your 
> profiles are there with the .quad suffix. You can also check the graphs for
> the profiles once once you find them. If not check carefully each step
> along the way. 
> 
> There is also the part of selecting the right printer (could be 1280-K6 ?)
> in PS during configuration at the print time. No idea if this helps,
> but it's what I do and it almost always works on my Mac 10.5 
> Leopoard and QTR v2.6.2. 
> 
> If still at a block, QTR has a pretty nice forum at Yahoo that is immensely helpful.
> 
> Jerry
> 
> 
> 
> 
> 
> 
> ________________________________
> From: enggass <enggass@...>
> To: QuadtoneRIP@yahoogroups.com
> Sent: Sunday, March 1, 2009 10:46:37 AM
> Subject: [QuadtoneRIP] Re: Using Quadtone Rip on Mac's
> 
> 
> I have just upgraded to v2.6.2 - K6 inks...
> I am using an Epson 1280.
> I have run the script (Install1280. command - said it was successful) and have the 
printer 
> installed, but when I go to  settings and the 'Quad-Tone Rip' settings, nothing is 
showing up 
> in my Curves selection drop downs.
> 
> I have not had this issue prior to uninstalling old version and installing version 2.6.2.
> Why? and can I manually put the proper files somewhere?
> Thanks,
> Steve
> 
> 
> 
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>