QTR-Quadtone RIP

Thanks folks. But I have been using the suggested workflow, which is to print a BW RGB image using the canned QTR icc's - QTR_RGB_Matte_Paper.icc and QTR_RGB_Photo_Paper.icc. It is the latter that seems to causing a problem. My understanding from the documentation is that you need to print with these icc's in order to get a good match between screen and print (which is one of the real strengths of the QTR software).

Kirk

--- In QuadtoneRIP@yahoogroups.com, "Keith" <kjrslr@...> wrote:
>
> In an answer to some questions I had asked back in August, one tidbit stood out.
> "You can create an ICC for softproofing in Windows. ICC's are only for
> softproofing in Windows not for printing. You must use QTR curves for printing." That might answer your ICC problem.
> 
> 
> --- In QuadtoneRIP@yahoogroups.com, Walker Blackwell <forums@> wrote:
> >
> > There is a problem in that CreateICC profiles are not being applied to the image data as it gets to QTR.  Seems like a CS5 problem although I haven't tested it in CS5/10.5.8
> > 
> > So far I have had no replies to my own queries on the subject. Further tests by other printers might be in order?
> > 
> > All the best,
> > Walker
>