QTR-Quadtone RIP

There are different patches for 2.7.0.0 for both Windows and some 
versions of Mac-OS, so it would help if you could say which OS you are 
using. Also, the instructions for ink calibration are different for the 
two platforms.

However, I doubt that the standard Claria inkset is usable with QTR 
(unless you create your own black only curves), as I think it only has 
one black ink.


On 28/04/2011 17:05, fjulsing wrote:
>
> I also don't seem to do the right thing. Both on Epson 1400 and Epson 
> P50 (=R280) I get a very dark BW print, no matter what I set to ink 
> calibration. Both have the original Claria inkset. QTR 2.7.0.0
> Also I get an 8 ink print, whereas both printers are 6 ink.
> I choose Quad1400 for the 1400 and quadr280 for the p50 as the qtr model.
>
> I'm new to this, so I do exactly like it says in the user's guide, 
> alas no success yet.
>
> Thanks for any help
>
> Frank
>
> --- In QuadtoneRIP@yahoogroups.com 
> <mailto:QuadtoneRIP%40yahoogroups.com>, "jfammartino" 
> <jfammartino@...> wrote:
> >
> > I am trying to print the ink separation page in QTR 2.6.2 on the 
> Epson 7600 to test the Piezo special addition inks. I am printing in 
> the calibration mode without changing the file from RGB to grayscale. 
> I keep getting a very faint print that is not discernible. I have 
> reinstalled QTR 2.6.2 for my OS 10.4.11 Tiger, and even uninstalled 
> and reinstalled. I have successfully printed this in the past on the 
> same 7600. I am printing at 100% with no advanced QTR adjustments. Can 
> anyone give me some advise? Thanks
> >
>
> 


[Non-text portions of this message have been removed]