QTR-Quadtone RIP

many of us have run into this. The easiest solution is to make sure you have at least about 1/2" leading and trailing margins, even if you have to add them then trim off later. Haven't heard of an actual fix.
Tyler

--- In QuadtoneRIP@yahoogroups.com, "Michel" <mpa.lepretre@...> wrote:
>
> 
> Hello !
> 
> This is my first post : I am a french advertising photographer, and I
> like nice B&W, so I started to use QTR with many satisfactions : I get
> much better resuls than with Epson driver !
> 
> My config is : Windows Seven / QTR gui 2.7.0 / Epson R2880 printer using
> inkjetfly inks.
> 
> I have build my own curves, and everythings works well, except that the
> first and/or last 2 cm are not correctly printed : I get lines without
> ink. Printing the same file, but placing the picture in the middle of
> the page give a correct print !
> 
> Parameters : Printer model : R2880 / Size A4 / portrait / 2880 /
> bi-directionnal / Ordered
> 
> You can see a sample of scanned print at
> http://www.mlepretre.com/divers/Qtr-Pb-02.jpg
> <http://www.mlepretre.com/divers/Qtr-Pb-02.jpg>  (I have increased
> contrast intentionally)
> 
> Any help ?
> 
> Thanks,
> 
> Michel
> 
> 
> 
> [Non-text portions of this message have been removed]
>