QTR-Quadtone RIP

Hi Mel..

Let me know how it goes once you have your inks installed..I believe I did go through this "instruction set" when I first got my inks..I'm willing to try it again..BTW, Dave sent me an email, but when I tried to reply it bounced (twice)..
  ----- Original Message ----- 
  From: Mel 
  To: QuadtoneRIP@yahoogroups.com 
  Sent: Friday, September 23, 2011 6:38 AM
  Subject: [QuadtoneRIP] Re: Profiles for Epson 1400 with UT-14 inks


    


  David explained it works for both Mac and Windows, so I had a go at installing them into QTR in Windows 7, although I am still awaiting the ink set from Ink Supply, so not able to do any test prints yet.

  1. In the QTR forum, go to Files>Curves>Epson 1400>QT_1400_UT14.zip and open the file.
  2. Open the Ink Descriptor file folder.
  3. Copy the required files(bo, cool, warm) to the 1400-mis folder in QuadToneRIP>Profiles.
  4. Open the QTR programme and click on Tools>Curve Creator>Printer Model>Quad1400-MIS
  5. Click on File>Open>Look In>1400-mis.
  6. Change File type to All Files.
  7. Click on one of the files you copied to the 1400-mis folder in 3. above and click Open.
  8. The Curve Creator will then show a description of the file contents (Ink Limit, densities, liearization etc.
  9. Save the file, naming it with an informative name, say UT14-EEnMatte-cool.qidf.
  10. When you open QTR this curve will appear in the list of curves available.

  It's important to read David's Readme file for recommendations with regard to blending of curves to produce different tones.

  There are cool and warm tones for three different papers and a BO for Epson Enhanced Matte.

  Thank you David for these curves - I will repost when I have had a chance to try them.

  Mel

  --- In QuadtoneRIP@yahoogroups.com, "David" <dpgoldenberg33@...> wrote:
  >
  > Alan,
  > The curves are available here on the group. Look under "Files", "Curves", "Epson 1400", and let me know if you have any problems or questions.
  > 
  > David
  > 
  > --- In QuadtoneRIP@yahoogroups.com, "alan2print" <alan2print@> wrote:
  > >
  > > Hi David,
  > > Would it be possible to have a copy of your UT14 ink files
  > > As they would give me a great starting point for these papers.
  > > 
  > > Thankyou Alan.
  >



  

[Non-text portions of this message have been removed]