Yahoo Groups archive
Thread
2014-05-20 by joel
Hello, I’m thinking of purchasing a Spyder Studio calibration ( it has a spectrocolorimeter) unit & was wondering if you can still use X-rite ColorPort software to read the QTR charts. Any help would be appreciated. Thanks Joel joelconison.com
2014-05-20 by Jim Thyer
Hi Joel, I do not know anything about the X-rite software, but the Spyder spectrocalorimeter has its own software for reading the patches. Quite a while since I used it for this purpose, so cannot remember the details. Hope this helps, Cheers Jim Thyer
-----Original Message----- From: joel jcon77@... [QuadtoneRIP] Sent: Wednesday, May 21, 2014 5:33 AM To: quadtonerip@yahoogroups.com Subject: [QuadtoneRIP] spyder calibration Hello, I\ufffdm thinking of purchasing a Spyder Studio calibration ( it has a spectrocolorimeter) unit & was wondering if you can still use X-rite ColorPort software to read the QTR charts. Any help would be appreciated. Thanks Joel joelconison.com ------------------------------------ ------------------------------------ Yahoo Groups Links
2014-05-21 by Ken Rennie
Hi Joel I have a datacolor spectrocolorimeter mode #1005 which I bought second hand. Before I bought it I contacted Datacolor and explained what I wanted to use it for. They were vey helpful and even understood QTR and its needs. My spctrocolorimeter reads the patches perfectly and produces L a and b readings for each patch. The #1005 model is at least 1 model and probably 2 models older than the one you are considering. The Spyder print software has a routine for producing QTR format results. Very easy to use but feel free to contact me if you need help. Ken
-----Original Message----- From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] Sent: 20 May 2014 20:33 To: quadtonerip@yahoogroups.com Subject: [QuadtoneRIP] spyder calibration Hello, I'm thinking of purchasing a Spyder Studio calibration ( it has a spectrocolorimeter) unit & was wondering if you can still use X-rite ColorPort software to read the QTR charts. Any help would be appreciated. Thanks Joel joelconison.com ------------------------------------ ------------------------------------ Yahoo Groups Links
2014-05-21 by joel
Hi Jim, Thanks. So it can also read the gray patches used in QTR ? Joel On May 20, 2014, at 7:56 PM, 'Jim Thyer' jimth@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote: > Hi Joel, > > I do not know anything about the X-rite software, but the Spyder > spectrocalorimeter has its own software for reading the patches. Quite a > while since I used it for this purpose, so cannot remember the details. > > Hope this helps, > > Cheers > > Jim Thyer > > -----Original Message----- > From: joel jcon77@comcast.net [QuadtoneRIP] > Sent: Wednesday, May 21, 2014 5:33 AM > To: quadtonerip@yahoogroups.com > Subject: [QuadtoneRIP] spyder calibration > > Hello, > I’m thinking of purchasing a Spyder Studio calibration ( it has a > spectrocolorimeter) unit & was wondering if you can still use X-rite > ColorPort software to read the QTR charts. Any help would be appreciated. > Thanks > Joel > > > joelconison.com > > > > > ------------------------------------ > > ------------------------------------ > > Yahoo Groups Links > > > > > > ------------------------------------ > > ------------------------------------ > > Yahoo Groups Links > > > joelconison.com
2014-05-21 by joel
Hi Joel
I have a datacolor spectrocolorimeter mode #1005 which I bought second hand.
Before I bought it I contacted Datacolor and explained what I wanted to use
it for. They were vey helpful and even understood QTR and its needs. My
spctrocolorimeter reads the patches perfectly and produces L a and b
readings for each patch. The #1005 model is at least 1 model and probably 2
models older than the one you are considering. The Spyder print software has
a routine for producing QTR format results. Very easy to use but feel free
to contact me if you need help.
Ken
-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]
Sent: 20 May 2014 20:33
To: quadtonerip@...m
Subject: [QuadtoneRIP] spyder calibration
Hello,
I'm thinking of purchasing a Spyder Studio calibration ( it has a
spectrocolorimeter) unit & was wondering if you can still use X-rite
ColorPort software to read the QTR charts. Any help would be appreciated.
Thanks
Joel
joelconison.com
------------------------------------
------------------------------------
Yahoo Groups Links
2014-05-21 by Jim Thyer
Yes it can. Jim
-----Original Message----- From: joel jcon77@... [QuadtoneRIP] Sent: Wednesday, May 21, 2014 10:51 PM To: QuadtoneRIP@yahoogroups.com Subject: Re: [QuadtoneRIP] spyder calibration Hi Jim, Thanks. So it can also read the gray patches used in QTR ? Joel On May 20, 2014, at 7:56 PM, 'Jim Thyer' jimth@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote: > Hi Joel, > > I do not know anything about the X-rite software, but the Spyder > spectrocalorimeter has its own software for reading the patches. Quite a > while since I used it for this purpose, so cannot remember the details. > > Hope this helps, > > Cheers > > Jim Thyer > > -----Original Message----- > From: joel jcon77@... [QuadtoneRIP] > Sent: Wednesday, May 21, 2014 5:33 AM > To: quadtonerip@yahoogroups.com > Subject: [QuadtoneRIP] spyder calibration > > Hello, > I\ufffdm thinking of purchasing a Spyder Studio calibration ( it has a > spectrocolorimeter) unit & was wondering if you can still use X-rite > ColorPort software to read the QTR charts. Any help would be appreciated. > Thanks > Joel > > > joelconison.com > > > > > ------------------------------------ > > ------------------------------------ > > Yahoo Groups Links > > > > > > ------------------------------------ > > ------------------------------------ > > Yahoo Groups Links > > > joelconison.com ------------------------------------ ------------------------------------ Yahoo Groups Links