QTR-Quadtone RIP

Mick

Just going through the details. Yes, this is helpful. Thanks! This is my re-expression of the documentation. Maybe it will help someone else besides yours truly:

Slots Espon Epson Name PiezoPro PiezoPro Table PiezoPro Bottle PZRO L-> R Code Code ID-Letters 1 Y Yellow Y Warm Light Warm Tone Light Gray WT-LG 2 VLM Vivid Light Magenta LM Warm: Medium Warm Tone Medium Gray WT-MG 3 LC Light Cyan LC Cool: Medium Cool Tone Medium Gray CT-MG 4 VM Vivid Magenta M Warm: Dark Warm Tone Dark Gray WT-DG 5 C Cyan C Cool: Dark Cool Tone Dark Gray CT-DG 6 LLK Light Light Black LLK Gloss Chroma OP Glross Chroma Optimizer GCO 7 LK Light Black LK Cool: Light Cool Tone Light Gray CT-LG 8 PK Photo Black PK HD Photo Black High Density Photo Black HDPK 9 MK Matte Black MK UltraHD Matte Black Ultra HD Matte Black HDMK

Hello,

You are right to be cautious. Not only do the the M/LM chips not work under the VM/VLM control chips. I destroyed many M/LM chips by inserting them in the VM/VLM slot before realizing they were incompatible.

You address a detail I'd missed. THank you. I want to be clear that the P600 Cartridge kit that Inkjetmall sells does come with VL and VLM cartridges (aka "Chipped" cartridges therefore match). So that part's clear. But you make a good point that folks shouldn't use the wrong cartridge in the right slot. I think I would have missed that so thank you for your post.

So the objective is to get the right ink in the right cartridge, and the right cartridge - with the right one-to-one corresponding chip on that cartridge - into the right slot on the machine.

This means the squishy part is the ink refers to an older set of cartridges rather than those used on the P600.

Small annoying details. I'm changing my table around to reflect this. Thanks!

"chipped cartridges"

Unless I'm mistaken Inkjet Mall do not sell the Epson chips, only control chips which reset the underlying Epson chips to empty. If I am mistaken I have wasted a lot of time and energy over the last few years foraging for used Epson cartridges.

So if I'm not mistaken then you have to find a set of Epson chips and if you place an M chip under a VM control chip into the printer you could burn it and I think possibly the printer slot as well.

But as someone else has suggested you should verify this on the peizography forum.

Good luck

Paul

Inkjetmall does sell chips for the P600 cartridges. Don't know about the other printers.

I will post this on their blog once I get it all finished. Thanks!

Skip