QTR-Quadtone RIP

QuadToneRIP version 2.3.5 Release Notes

   QTRgui version 2.3.14.0
   QTR-Create-ICC version 2.3.5.0
   QTR-Create-ICC RGB version 2.3.5.0

This release may be installed directly over older versions.

R800 and R1800 Neutral K7 ink profiles for the Mac fixed.

The new RGB version of QTR-Create-ICC is very similar to the
standard one but the ICC profile is RGB and can be used in Qimage.

Multiple Copies feature fixed.

The QTR-Create-ICC tools now have the capability to average
several measurements.  There is a new target and a reference file
for a 21x4 stepwedge.  The 21 steps are printed out four times and
you should scan/read all of them.

Roy

Roy Harrington wrote:
> QuadToneRIP version 2.3.5 Release Notes
> 
>    QTRgui version 2.3.14.0
>    QTR-Create-ICC version 2.3.5.0
>    QTR-Create-ICC RGB version 2.3.5.0
> 
> This release may be installed directly over older versions.
> 
> R800 and R1800 Neutral K7 ink profiles for the Mac fixed.
> 
> The new RGB version of QTR-Create-ICC is very similar to the
> standard one but the ICC profile is RGB and can be used in Qimage.
> 
> Multiple Copies feature fixed.
> 
> The QTR-Create-ICC tools now have the capability to average
> several measurements.  There is a new target and a reference file
> for a 21x4 stepwedge.  The 21 steps are printed out four times and
> you should scan/read all of them.
> 
> Roy

Thank you. Specs look nice Roy.


I have used averaging before and my youngest son is improving 
the tool he had written for it. I have followed the discussion 
on the Colorsync list and wonder what you put in it. Plain 
averaging or averaging and throwing out the most extreme for 
every 4 measurements. On 4 measurements that may be a bit drastic.

There's something not correct with Qimage's conversions from a 
grayscale file to the Print to File RGB file. That's with CM 
off. I have to check that further this weekend.


Ernst

                    --
           Ernst Dinkla


www.pigment-print.com
(         unvollendet         )