QTR-Quadtone RIP

Hello,
Thanks in advance for any insight you can give!  I have a new NK7 
inkset with trial Hahnemule papers.  The photorag print has nice 
deep shadow gradations, but the mid-tones are not at all accurate.  
Nozzle check is good and I am using the latest QTR 2.3.5.  I went 
into the profiles and there is only one profile in either 
the "profile" folder or the "quadtone" folder with inkset 
information and that is in the "profile" folder for "hahnemule photo 
rag."  I see no other curve profiles for any other paper.  I assume 
I selected the "hahnemule photo rag" from the Quadtone folder with 
QTR GUI as I selected the 2200 NK7 modeling for printing.  After the 
print, I realized I needed to check to see what the linearization 
curve looks like.  The files are there with descriptions, but there 
seems to be no data for them.  Am I interpreting this correctly that 
there may be profile names but no real data and linearization 
curves?  

My second question is this:  I have quadruple checked the loading of 
the cartridges and I am a little confused on the QTR Ink pattern 
Page print.  Ink 1 is black and is the darkest row.  Ink 2-3 look 
like they proceed to get lighter, but ink 4-yellow-is extemely light 
with light black nearly as dark as the ink 2-cyan.  Should the ink 
pattern print page have subtle gradations from Ink 1-black to ink 8-
light black?  Thanks for any help on these two issues.
Jeff Ball

I will answer my own post.  I printed with the one curve 
profile "hahnemuhle photo rag 1440" that actually had linearization 
and it is the perfect print.  Too bad the other profiles don't have 
linearizations.  I am most happy with this output and plan on using 
it exclusively.  Just ordered my package of 11x17 Hahnemuhle and all 
is well.  
Jeff
--- In QuadtoneRIP@yahoogroups.com, "jefferyball" <jeffball@e...> 
wrote:
>
> Hello,
> Thanks in advance for any insight you can give!  I have a new NK7 
> inkset with trial Hahnemule papers.  The photorag print has nice 
> deep shadow gradations, but the mid-tones are not at all 
accurate.  
> Nozzle check is good and I am using the latest QTR 2.3.5.  I went 
> into the profiles and there is only one profile in either 
> the "profile" folder or the "quadtone" folder with inkset 
> information and that is in the "profile" folder for "hahnemule 
photo 
> rag."  I see no other curve profiles for any other paper.  I 
assume 
> I selected the "hahnemule photo rag" from the Quadtone folder with 
> QTR GUI as I selected the 2200 NK7 modeling for printing.  After 
the 
> print, I realized I needed to check to see what the linearization 
> curve looks like.  The files are there with descriptions, but 
there 
> seems to be no data for them.  Am I interpreting this correctly 
that 
> there may be profile names but no real data and linearization 
> curves?  
> 
> My second question is this:  I have quadruple checked the loading 
of 
> the cartridges and I am a little confused on the QTR Ink pattern 
> Page print.  Ink 1 is black and is the darkest row.  Ink 2-3 look 
> like they proceed to get lighter, but ink 4-yellow-is extemely 
light 
> with light black nearly as dark as the ink 2-cyan.  Should the ink 
> pattern print page have subtle gradations from Ink 1-black to ink 
8-

> light black?  Thanks for any help on these two issues.
> Jeff Ball
>