Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Thread

QTR - image to raster error

QTR - image to raster error

2006-08-31 by photog_pete

Hi,

I'm new to QTR and have been unsuccessful in getting it to print
without this error using two different files one saved as tif in
photoshop cs2 with the matte icc and the other with the photo icc.  My
searches for similar errors has not turned up anything I can use in my
situation.  The QTRlog is attached below.  I have two computers, one
with win 2000 and one with win xp, and the same error occurs on both.
 My output is to an epson 4000 (lastest firmware) using UC inks.  The
printer prints 95% of the image and stops until I click the OK button
for the error message.  Then it completes the print job.

I have already uninstalled/reinstalled (including the icc files at the
system and printer level) on both machines with no luck.

Any help would be greatly appreciated.

***** QTRgui Log *****
      Version 2.4.2.11
      Print by Print
      Execution Mode is Pipes

".\bin\ImageToRaster.exe" gui 0 0 1 "PPD=Quad4000.PPD PRINTER=Quad4000
MediaType=Photo ripFeed=AutoSheet Pagesize=Letter topmargin=0.12
leftmargin=5.75 scale-percent=100 Landscape=yes Resolution=1440
ColorModel=QTRIP" "K:\ImagesK\MtEdithCavell21BWTest.tif"
".\bin\QuadToPrinter.exe" gui 0 0 1 "PPD=Quad4000.PPD PRINTER=Quad4000
MediaType=Photo ripFeed=AutoSheet Pagesize=Letter Resolution=1440
RipSpeed=hispeed ColorModel=QTRIP ripCurve1=UC-EPhotoPaper-neutral
ripCurve2=UC-EPhotoPaper-neutral ripBlend=50 stpDither=Ordered
RipBlack=Photo ripGamma=0 ripLimit=0"
".\bin\RawPrint.exe" "EPSON Stylus Pro 4000" - "MtEdithCavell21BWTest.tif"

***** ImageToRaster Log *****
      Version 2.4.2.0

INFO: .\bin\ImageToRaster.exe gui 0 0 1 PPD=Quad4000.PPD
PRINTER=Quad4000 MediaType=Photo ripFeed=AutoSheet Pagesize=Letter
topmargin=0.12 leftmargin=5.75 scale-percent=100 Landscape=yes
Resolution=1440 ColorModel=QTRIP K:\ImagesK\MtEdithCavell21BWTest.tif
PPDFILE = .\ppd\Quad4000.PPD
DEBUG: Page = 612x792; 9,40 to 603,783
DEBUG: Searching for profile "1440/Photo"...
INFO: Loading image file...
DEBUG: ImageOpen("K:\ImagesK\MtEdithCavell21BWTest.tif", 1, 1, 100, 0,
0012F87C)
calling ReadTIFF
TIFFReadDirectory: Warning, K:\ImagesK\MtEdithCavell21BWTest.tif:
wrong data type 1 for "XMLPacket"; tag ignored.
TIFFReadDirectory: Warning, K:\ImagesK\MtEdithCavell21BWTest.tif:
unknown field with tag 34665 (0x8769) encountered.
DEBUG: TIFF resolution = 288.000000x288.000000, units=2
DEBUG: Stored resolution = 288x288 PPI
DEBUG: orientation = top-left
DEBUG: photometric = 1
DEBUG: compression = 1
DEBUG: Creating tile array (6x5)
DEBUG: Image size 5.000 x 3.924
DEBUG: Printable size 10.319 x 8.250
DEBUG: Scaled size 5.000 x 3.924
DEBUG: PageSize = [612 792] (8.50 11.00)
DEBUG: cupsWidth = 5940
DEBUG: cupsHeight = 7430
DEBUG: cupsBitsPerColor = 8
DEBUG: cupsBitsPerPixel = 8
DEBUG: cupsBytesPerLine = 5940
DEBUG: cupsColorOrder = 0
DEBUG: cupsColorSpace = 0
DEBUG: img->colorspace = 1
INFO: Formatting page 1...
x=(0,1439) y=(0,1129), temp=(2825,3600)
top:  ht=7430, sz=3600, y=90
left:  wd=5940, sz=2825, x=-24
bottom:  ht=7430, sz=3600, y=3740

***** QuadToPrinter Log *****
      Version 2.4.2.0

PPDFILE = .\ppd\Quad4000.PPD
NOTICE: QTR using curve file UC-EPhotoPaper-neutral
NOTICE: QTR using curve file UC-EPhotoPaper-neutral
PAGE: 1 1
DEBUG: StartPage...
DEBUG: MediaClass = "AutoSheet"
DEBUG: MediaColor = ""
DEBUG: MediaType = "Photo"
DEBUG: OutputType = ""
DEBUG: AdvanceDistance = 0
DEBUG: AdvanceMedia = 0
DEBUG: Collate = 0
DEBUG: CutMedia = 0
DEBUG: Duplex = 0
NOTICE: HWResolution = [ 720 720 ]
NOTICE: ImagingBoundingBox = [ 9 40 594 743 ]
DEBUG: InsertSheet = 0
DEBUG: Jog = 0
DEBUG: LeadingEdge = 0
NOTICE: Margins = [ 9 40 ]
DEBUG: ManualFeed = 0
DEBUG: MediaPosition = 0
DEBUG: MediaWeight = 0
DEBUG: MirrorPrint = 0
DEBUG: NegativePrint = 0
DEBUG: NumCopies = 1
DEBUG: Orientation = 0
DEBUG: OutputFaceUp = 0
NOTICE: PageSize = [ 612 792 ]
DEBUG: Separations = 0
DEBUG: TraySwitch = 0
DEBUG: Tumble = 0
NOTICE: cupsWidth = 5940
NOTICE: cupsHeight = 7430
DEBUG: cupsMediaType = 0
DEBUG: cupsBitsPerColor = 16
DEBUG: cupsBitsPerPixel = 112
DEBUG: cupsBytesPerLine = 83160
DEBUG: cupsColorOrder = 0
DEBUG: cupsColorSpace = 8
DEBUG: cupsCompression = 0
DEBUG: cupsRowCount = 0
DEBUG: cupsRowFeed = 0
DEBUG: cupsRowStep = 0
DEBUG: PageSize = 612x792
DEBUG: stp_get_output_to(v) ||
DEBUG: stp_get_driver(v) |escp2-4000|
DEBUG: stp_get_ppd_file(v) ||
NOTICE: stp_get_resolution(v) |1440|
DEBUG: stp_get_media_size(v) ||
DEBUG: stp_get_media_type(v) |Photo|
DEBUG: stp_get_media_source(v) |AutoSheet|
DEBUG: stp_get_ink_type(v) ||
NOTICE: stp_get_dither_algorithm(v) |Ordered|
DEBUG: stp_get_output_type(v) |4|
NOTICE: GIMP-PRINT w=612 l=9 r=603  h=792 t=783 b=40
NOTICE: GIMP-PRINT w=5940 l=90 r=90  h=7430 t=90 b=400
DEBUG: GIMP-PRINT: Image_height 7430
DEBUG: GIMP-PRINT: Image_width 5940
DEBUG: GIMP-PRINT: Image_width 5940
DEBUG: GIMP-PRINT: Image_height 7430
DEBUG: GIMP-PRINT: Image_width 5940
DEBUG: GIMP-PRINT: Image_height 7430
DEBUG: GIMP-PRINT: Image_height 7430
INFO: Starting page 1...
INFO: Printing page 1, 0%
INFO: Printing page 1, 3%
INFO: Printing page 1, 7%
INFO: Printing page 1, 10%
INFO: Printing page 1, 14%
INFO: Printing page 1, 17%
INFO: Printing page 1, 21%
INFO: Printing page 1, 24%
INFO: Printing page 1, 28%
INFO: Printing page 1, 31%
INFO: Printing page 1, 34%
INFO: Printing page 1, 38%
INFO: Printing page 1, 41%
INFO: Printing page 1, 45%
INFO: Printing page 1, 48%
INFO: Printing page 1, 52%
INFO: Printing page 1, 55%
INFO: Printing page 1, 59%
INFO: Printing page 1, 62%
INFO: Printing page 1, 65%
INFO: Printing page 1, 69%
INFO: Printing page 1, 72%
INFO: Printing page 1, 76%
INFO: Printing page 1, 79%
INFO: Printing page 1, 83%
INFO: Printing page 1, 86%
INFO: Printing page 1, 90%
INFO: Printing page 1, 93%
INFO: Printing page 1, 96%
INFO: Printing page 1, 100%
INFO: Finished page 1...
INFO: Ready to print.

***** RawPrint Log *****
      Version 2.3.0.0


***** End of Log *****

Re: QTR - image to raster error

2006-09-01 by Roy Harrington

I don't see any errors -- the logs look like everything printed out normally.
The 2 tiff read warnings always show -- they are not important.

Is there a message on the printer screen?

Roy

--- In QuadtoneRIP@...m, "photog_pete" <pedwards@...> wrote:
Show quoted textHide quoted text
>
> Hi,
> 
> I'm new to QTR and have been unsuccessful in getting it to print
> without this error using two different files one saved as tif in
> photoshop cs2 with the matte icc and the other with the photo icc.  My
> searches for similar errors has not turned up anything I can use in my
> situation.  The QTRlog is attached below.  I have two computers, one
> with win 2000 and one with win xp, and the same error occurs on both.
>  My output is to an epson 4000 (lastest firmware) using UC inks.  The
> printer prints 95% of the image and stops until I click the OK button
> for the error message.  Then it completes the print job.
> 
> I have already uninstalled/reinstalled (including the icc files at the
> system and printer level) on both machines with no luck.
> 
> Any help would be greatly appreciated.
> 
> ***** QTRgui Log *****
>       Version 2.4.2.11
>       Print by Print
>       Execution Mode is Pipes
> 
> ".\bin\ImageToRaster.exe" gui 0 0 1 "PPD=Quad4000.PPD PRINTER=Quad4000
> MediaType=Photo ripFeed=AutoSheet Pagesize=Letter topmargin=0.12
> leftmargin=5.75 scale-percent=100 Landscape=yes Resolution=1440
> ColorModel=QTRIP" "K:\ImagesK\MtEdithCavell21BWTest.tif"
> ".\bin\QuadToPrinter.exe" gui 0 0 1 "PPD=Quad4000.PPD PRINTER=Quad4000
> MediaType=Photo ripFeed=AutoSheet Pagesize=Letter Resolution=1440
> RipSpeed=hispeed ColorModel=QTRIP ripCurve1=UC-EPhotoPaper-neutral
> ripCurve2=UC-EPhotoPaper-neutral ripBlend=50 stpDither=Ordered
> RipBlack=Photo ripGamma=0 ripLimit=0"
> ".\bin\RawPrint.exe" "EPSON Stylus Pro 4000" - "MtEdithCavell21BWTest.tif"
> 
> ***** ImageToRaster Log *****
>       Version 2.4.2.0
> 
> INFO: .\bin\ImageToRaster.exe gui 0 0 1 PPD=Quad4000.PPD
> PRINTER=Quad4000 MediaType=Photo ripFeed=AutoSheet Pagesize=Letter
> topmargin=0.12 leftmargin=5.75 scale-percent=100 Landscape=yes
> Resolution=1440 ColorModel=QTRIP K:\ImagesK\MtEdithCavell21BWTest.tif
> PPDFILE = .\ppd\Quad4000.PPD
> DEBUG: Page = 612x792; 9,40 to 603,783
> DEBUG: Searching for profile "1440/Photo"...
> INFO: Loading image file...
> DEBUG: ImageOpen("K:\ImagesK\MtEdithCavell21BWTest.tif", 1, 1, 100, 0,
> 0012F87C)
> calling ReadTIFF
> TIFFReadDirectory: Warning, K:\ImagesK\MtEdithCavell21BWTest.tif:
> wrong data type 1 for "XMLPacket"; tag ignored.
> TIFFReadDirectory: Warning, K:\ImagesK\MtEdithCavell21BWTest.tif:
> unknown field with tag 34665 (0x8769) encountered.
> DEBUG: TIFF resolution = 288.000000x288.000000, units=2
> DEBUG: Stored resolution = 288x288 PPI
> DEBUG: orientation = top-left
> DEBUG: photometric = 1
> DEBUG: compression = 1
> DEBUG: Creating tile array (6x5)
> DEBUG: Image size 5.000 x 3.924
> DEBUG: Printable size 10.319 x 8.250
> DEBUG: Scaled size 5.000 x 3.924
> DEBUG: PageSize = [612 792] (8.50 11.00)
> DEBUG: cupsWidth = 5940
> DEBUG: cupsHeight = 7430
> DEBUG: cupsBitsPerColor = 8
> DEBUG: cupsBitsPerPixel = 8
> DEBUG: cupsBytesPerLine = 5940
> DEBUG: cupsColorOrder = 0
> DEBUG: cupsColorSpace = 0
> DEBUG: img->colorspace = 1
> INFO: Formatting page 1...
> x=(0,1439) y=(0,1129), temp=(2825,3600)
> top:  ht=7430, sz=3600, y=90
> left:  wd=5940, sz=2825, x=-24
> bottom:  ht=7430, sz=3600, y=3740
> 
> ***** QuadToPrinter Log *****
>       Version 2.4.2.0
> 
> PPDFILE = .\ppd\Quad4000.PPD
> NOTICE: QTR using curve file UC-EPhotoPaper-neutral
> NOTICE: QTR using curve file UC-EPhotoPaper-neutral
> PAGE: 1 1
> DEBUG: StartPage...
> DEBUG: MediaClass = "AutoSheet"
> DEBUG: MediaColor = ""
> DEBUG: MediaType = "Photo"
> DEBUG: OutputType = ""
> DEBUG: AdvanceDistance = 0
> DEBUG: AdvanceMedia = 0
> DEBUG: Collate = 0
> DEBUG: CutMedia = 0
> DEBUG: Duplex = 0
> NOTICE: HWResolution = [ 720 720 ]
> NOTICE: ImagingBoundingBox = [ 9 40 594 743 ]
> DEBUG: InsertSheet = 0
> DEBUG: Jog = 0
> DEBUG: LeadingEdge = 0
> NOTICE: Margins = [ 9 40 ]
> DEBUG: ManualFeed = 0
> DEBUG: MediaPosition = 0
> DEBUG: MediaWeight = 0
> DEBUG: MirrorPrint = 0
> DEBUG: NegativePrint = 0
> DEBUG: NumCopies = 1
> DEBUG: Orientation = 0
> DEBUG: OutputFaceUp = 0
> NOTICE: PageSize = [ 612 792 ]
> DEBUG: Separations = 0
> DEBUG: TraySwitch = 0
> DEBUG: Tumble = 0
> NOTICE: cupsWidth = 5940
> NOTICE: cupsHeight = 7430
> DEBUG: cupsMediaType = 0
> DEBUG: cupsBitsPerColor = 16
> DEBUG: cupsBitsPerPixel = 112
> DEBUG: cupsBytesPerLine = 83160
> DEBUG: cupsColorOrder = 0
> DEBUG: cupsColorSpace = 8
> DEBUG: cupsCompression = 0
> DEBUG: cupsRowCount = 0
> DEBUG: cupsRowFeed = 0
> DEBUG: cupsRowStep = 0
> DEBUG: PageSize = 612x792
> DEBUG: stp_get_output_to(v) ||
> DEBUG: stp_get_driver(v) |escp2-4000|
> DEBUG: stp_get_ppd_file(v) ||
> NOTICE: stp_get_resolution(v) |1440|
> DEBUG: stp_get_media_size(v) ||
> DEBUG: stp_get_media_type(v) |Photo|
> DEBUG: stp_get_media_source(v) |AutoSheet|
> DEBUG: stp_get_ink_type(v) ||
> NOTICE: stp_get_dither_algorithm(v) |Ordered|
> DEBUG: stp_get_output_type(v) |4|
> NOTICE: GIMP-PRINT w=612 l=9 r=603  h=792 t=783 b=40
> NOTICE: GIMP-PRINT w=5940 l=90 r=90  h=7430 t=90 b=400
> DEBUG: GIMP-PRINT: Image_height 7430
> DEBUG: GIMP-PRINT: Image_width 5940
> DEBUG: GIMP-PRINT: Image_width 5940
> DEBUG: GIMP-PRINT: Image_height 7430
> DEBUG: GIMP-PRINT: Image_width 5940
> DEBUG: GIMP-PRINT: Image_height 7430
> DEBUG: GIMP-PRINT: Image_height 7430
> INFO: Starting page 1...
> INFO: Printing page 1, 0%
> INFO: Printing page 1, 3%
> INFO: Printing page 1, 7%
> INFO: Printing page 1, 10%
> INFO: Printing page 1, 14%
> INFO: Printing page 1, 17%
> INFO: Printing page 1, 21%
> INFO: Printing page 1, 24%
> INFO: Printing page 1, 28%
> INFO: Printing page 1, 31%
> INFO: Printing page 1, 34%
> INFO: Printing page 1, 38%
> INFO: Printing page 1, 41%
> INFO: Printing page 1, 45%
> INFO: Printing page 1, 48%
> INFO: Printing page 1, 52%
> INFO: Printing page 1, 55%
> INFO: Printing page 1, 59%
> INFO: Printing page 1, 62%
> INFO: Printing page 1, 65%
> INFO: Printing page 1, 69%
> INFO: Printing page 1, 72%
> INFO: Printing page 1, 76%
> INFO: Printing page 1, 79%
> INFO: Printing page 1, 83%
> INFO: Printing page 1, 86%
> INFO: Printing page 1, 90%
> INFO: Printing page 1, 93%
> INFO: Printing page 1, 96%
> INFO: Printing page 1, 100%
> INFO: Finished page 1...
> INFO: Ready to print.
> 
> ***** RawPrint Log *****
>       Version 2.3.0.0
> 
> 
> ***** End of Log *****
>

RE: [QuadtoneRIP] Re: QTR - image to raster error

2006-09-01 by Peter Edwards

There is no message on the printer LCD. It remains showing the word "printing." The print head parks to the right with fan still running until the error message on the computer screen is cleared. Then it continues printing to the end completely. I'm unable to capture the win xp error message so I will write the heading below. The remainder of the message is extremely long and looks to be in machine language plus text sidebar. I just sent it to Microsoft as requested by the error screen (the only one I have done this with so far). I don't know how available they would make it to you.
On win 2000 only a message box appears. There is no request to send it to Microsoft.
Error Signature
AppName:imagetoraster.exe AppVer:2.4.2.0 ModName:ntdll.dll
ModVer:5.1.2600.2180 Offset:00011d69
Pete
Show quoted textHide quoted text
-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]On Behalf Of Roy Harrington
Sent: Friday, September 01, 2006 2:05 AM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: QTR - image to raster error


I don't see any errors -- the logs look like everything printed out normally.
The 2 tiff read warnings always show -- they are not important.

Is there a message on the printer screen?

Roy

--- In QuadtoneRIP@yahoogroups.com, "photog_pete" .> wrote:
>
> Hi,
>
> I'm new to QTR and have been unsuccessful in getting it to print
> without this error using two different files one saved as tif in
> photoshop cs2 with the matte icc and the other with the photo icc. My
> searches for similar errors has not turned up anything I can use in my
> situation. The QTRlog is attached below. I have two computers, one
> with win 2000 and one with win xp, and the same error occurs on both.
> My output is to an epson 4000 (lastest firmware) using UC inks. The
> printer prints 95% of the image and stops until I click the OK button
> for the error message. Then it completes the print job.
>
> I have already uninstalled/reinstalled (including the icc files at the
> system and printer level) on both machines with no luck.
>
> Any help would be greatly appreciated.
>
> ***** QTRgui Log *****
> Version 2.4.2.11
> Print by Print
> Execution Mode is Pipes
>
> ".\bin\ImageToRaster.exe" gui 0 0 1 "PPD=Quad4000.PPD PRINTER=Quad4000
> MediaType=Photo ripFeed=AutoSheet Pagesize=Letter topmargin=0.12
> leftmargin=5.75 scale-percent=100 Landscape=yes Resolution=1440
> ColorModel=QTRIP" "K:\ImagesK\MtEdithCavell21BWTest.tif"
> ".\bin\QuadToPrinter.exe" gui 0 0 1 "PPD=Quad4000.PPD PRINTER=Quad4000
> MediaType=Photo ripFeed=AutoSheet Pagesize=Letter Resolution=1440
> RipSpeed=hispeed ColorModel=QTRIP ripCurve1=UC-EPhotoPaper-neutral
> ripCurve2=UC-EPhotoPaper-neutral ripBlend=50 stpDither=Ordered
> RipBlack=Photo ripGamma=0 ripLimit=0"
> ".\bin\RawPrint.exe" "EPSON Stylus Pro 4000" - "MtEdithCavell21BWTest.tif"
>
> ***** ImageToRaster Log *****
> Version 2.4.2.0
>
> INFO: .\bin\ImageToRaster.exe gui 0 0 1 PPD=Quad4000.PPD
> PRINTER=Quad4000 MediaType=Photo ripFeed=AutoSheet Pagesize=Letter
> topmargin=0.12 leftmargin=5.75 scale-percent=100 Landscape=yes
> Resolution=1440 ColorModel=QTRIP K:\ImagesK\MtEdithCavell21BWTest.tif
> PPDFILE = .\ppd\Quad4000.PPD
> DEBUG: Page = 612x792; 9,40 to 603,783
> DEBUG: Searching for profile "1440/Photo"...
> INFO: Loading image file...
> DEBUG: ImageOpen("K:\ImagesK\MtEdithCavell21BWTest.tif", 1, 1, 100, 0,
> 0012F87C)
> calling ReadTIFF
> TIFFReadDirectory: Warning, K:\ImagesK\MtEdithCavell21BWTest.tif:
> wrong data type 1 for "XMLPacket"; tag ignored.
> TIFFReadDirectory: Warning, K:\ImagesK\MtEdithCavell21BWTest.tif:
> unknown field with tag 34665 (0x8769) encountered.
> DEBUG: TIFF resolution = 288.000000x288.000000, units=2
> DEBUG: Stored resolution = 288x288 PPI
> DEBUG: orientation = top-left
> DEBUG: photometric = 1
> DEBUG: compression = 1
> DEBUG: Creating tile array (6x5)
> DEBUG: Image size 5.000 x 3.924
> DEBUG: Printable size 10.319 x 8.250
> DEBUG: Scaled size 5.000 x 3.924
> DEBUG: PageSize = [612 792] (8.50 11.00)
> DEBUG: cupsWidth = 5940
> DEBUG: cupsHeight = 7430
> DEBUG: cupsBitsPerColor = 8
> DEBUG: cupsBitsPerPixel = 8
> DEBUG: cupsBytesPerLine = 5940
> DEBUG: cupsColorOrder = 0
> DEBUG: cupsColorSpace = 0
> DEBUG: img->colorspace = 1
> INFO: Formatting page 1...
> x=(0,1439) y=(0,1129), temp=(2825,3600)
> top: ht=7430, sz=3600, y=90
> left: wd=5940, sz=2825, x=-24
> bottom: ht=7430, sz=3600, y=3740
>
> ***** QuadToPrinter Log *****
> Version 2.4.2.0
>
> PPDFILE = .\ppd\Quad4000.PPD
> NOTICE: QTR using curve file UC-EPhotoPaper-neutral
> NOTICE: QTR using curve file UC-EPhotoPaper-neutral
> PAGE: 1 1
> DEBUG: StartPage...
> DEBUG: MediaClass = "AutoSheet"
> DEBUG: MediaColor = ""
> DEBUG: MediaType = "Photo"
> DEBUG: OutputType = ""
> DEBUG: AdvanceDistance = 0
> DEBUG: AdvanceMedia = 0
> DEBUG: Collate = 0
> DEBUG: CutMedia = 0
> DEBUG: Duplex = 0
> NOTICE: HWResolution = [ 720 720 ]
> NOTICE: ImagingBoundingBox = [ 9 40 594 743 ]
> DEBUG: InsertSheet = 0
> DEBUG: Jog = 0
> DEBUG: LeadingEdge = 0
> NOTICE: Margins = [ 9 40 ]
> DEBUG: ManualFeed = 0
> DEBUG: MediaPosition = 0
> DEBUG: MediaWeight = 0
> DEBUG: MirrorPrint = 0
> DEBUG: NegativePrint = 0
> DEBUG: NumCopies = 1
> DEBUG: Orientation = 0
> DEBUG: OutputFaceUp = 0
> NOTICE: PageSize = [ 612 792 ]
> DEBUG: Separations = 0
> DEBUG: TraySwitch = 0
> DEBUG: Tumble = 0
> NOTICE: cupsWidth = 5940
> NOTICE: cupsHeight = 7430
> DEBUG: cupsMediaType = 0
> DEBUG: cupsBitsPerColor = 16
> DEBUG: cupsBitsPerPixel = 112
> DEBUG: cupsBytesPerLine = 83160
> DEBUG: cupsColorOrder = 0
> DEBUG: cupsColorSpace = 8
> DEBUG: cupsCompression = 0
> DEBUG: cupsRowCount = 0
> DEBUG: cupsRowFeed = 0
> DEBUG: cupsRowStep = 0
> DEBUG: PageSize = 612x792
> DEBUG: stp_get_output_to(v) ||
> DEBUG: stp_get_driver(v) |escp2-4000|
> DEBUG: stp_get_ppd_file(v) ||
> NOTICE: stp_get_resolution(v) |1440|
> DEBUG: stp_get_media_size(v) ||
> DEBUG: stp_get_media_type(v) |Photo|
> DEBUG: stp_get_media_source(v) |AutoSheet|
> DEBUG: stp_get_ink_type(v) ||
> NOTICE: stp_get_dither_algorithm(v) |Ordered|
> DEBUG: stp_get_output_type(v) |4|
> NOTICE: GIMP-PRINT w=612 l=9 r=603 h=792 t=783 b=40
> NOTICE: GIMP-PRINT w=5940 l=90 r=90 h=7430 t=90 b=400
> DEBUG: GIMP-PRINT: Image_height 7430
> DEBUG: GIMP-PRINT: Image_width 5940
> DEBUG: GIMP-PRINT: Image_width 5940
> DEBUG: GIMP-PRINT: Image_height 7430
> DEBUG: GIMP-PRINT: Image_width 5940
> DEBUG: GIMP-PRINT: Image_height 7430
> DEBUG: GIMP-PRINT: Image_height 7430
> INFO: Starting page 1...
> INFO: Printing page 1, 0%
> INFO: Printing page 1, 3%
> INFO: Printing page 1, 7%
> INFO: Printing page 1, 10%
> INFO: Printing page 1, 14%
> INFO: Printing page 1, 17%
> INFO: Printing page 1, 21%
> INFO: Printing page 1, 24%
> INFO: Printing page 1, 28%
> INFO: Printing page 1, 31%
> INFO: Printing page 1, 34%
> INFO: Printing page 1, 38%
> INFO: Printing page 1, 41%
> INFO: Printing page 1, 45%
> INFO: Printing page 1, 48%
> INFO: Printing page 1, 52%
> INFO: Printing page 1, 55%
> INFO: Printing page 1, 59%
> INFO: Printing page 1, 62%
> INFO: Printing page 1, 65%
> INFO: Printing page 1, 69%
> INFO: Printing page 1, 72%
> INFO: Printing page 1, 76%
> INFO: Printing page 1, 79%
> INFO: Printing page 1, 83%
> INFO: Printing page 1, 86%
> INFO: Printing page 1, 90%
> INFO: Printing page 1, 93%
> INFO: Printing page 1, 96%
> INFO: Printing page 1, 100%
> INFO: Finished page 1...
> INFO: Ready to print.
>
> ***** RawPrint Log *****
> Version 2.3.0.0
>
>
> ***** End of Log *****
>

Re: QTR - image to raster error

2006-12-04 by Leon Strembitsky

I've been having the same problem, two computers running Win2000, XP, 
downloaded and installed latest firmware for printer (Epson 7600) and 
latest version of QTR and still the same thing happens. I notice that 
this thread was from September and stopped before any solution was 
reached so did this get resolved? I'd sure be interested in what to 
do if it did. it's a bit of a pain to have to babysit every print.

Thanks,

Leon Strembitsky

caelinartworks.com

--- In QuadtoneRIP@yahoogroups.com, Peter Edwards <pedwards@...> 
wrote:
>
> There is no message on the printer LCD.  It remains showing the word
> "printing."  The print head parks to the right with fan still 
running until
> the error message on the computer screen is cleared.  Then it 
continues
> printing to the end completely.  I'm unable to capture the win xp 
error
> message so I will write the heading below.  The remainder of the 
message is
> extremely long and looks to be in machine language plus text 
sidebar.  I
> just sent it to Microsoft as requested by the error screen (the 
only one I
> have done this with so far).  I don't know how available they would 
make it
> to you.
> 
> On win 2000 only a message box appears.  There is no request to 
send it to
> Microsoft.
> 
> Error Signature
> AppName:imagetoraster.exe  AppVer:2.4.2.0  ModName:ntdll.dll
> ModVer:5.1.2600.2180  Offset:00011d69
> 
> Pete
>   -----Original Message-----
>   From: QuadtoneRIP@yahoogroups.com 
[mailto:QuadtoneRIP@yahoogroups.com]On
> Behalf Of Roy Harrington
>   Sent: Friday, September 01, 2006 2:05 AM
>   To: QuadtoneRIP@yahoogroups.com
>   Subject: [QuadtoneRIP] Re: QTR - image to raster error
> 
> 
> 
>   I don't see any errors -- the logs look like everything printed 
out
> normally.
>   The 2 tiff read warnings always show -- they are not important.
> 
>   Is there a message on the printer screen?
> 
>   Roy
> 
>   --- In QuadtoneRIP@yahoogroups.com, "photog_pete" <pedwards@> 
wrote:
>   >
>   > Hi,
>   >
>   > I'm new to QTR and have been unsuccessful in getting it to print
>   > without this error using two different files one saved as tif in
>   > photoshop cs2 with the matte icc and the other with the photo 
icc. My
>   > searches for similar errors has not turned up anything I can 
use in my
>   > situation. The QTRlog is attached below. I have two computers, 
one
>   > with win 2000 and one with win xp, and the same error occurs on 
both.
>   > My output is to an epson 4000 (lastest firmware) using UC inks. 
The
>   > printer prints 95% of the image and stops until I click the OK 
button
>   > for the error message. Then it completes the print job.
>   >
>   > I have already uninstalled/reinstalled (including the icc files 
at the
>   > system and printer level) on both machines with no luck.
>   >
>   > Any help would be greatly appreciated.
>   >
>   > ***** QTRgui Log *****
>   > Version 2.4.2.11
>   > Print by Print
>   > Execution Mode is Pipes
>   >
>   > ".\bin\ImageToRaster.exe" gui 0 0 1 "PPD=Quad4000.PPD 
PRINTER=Quad4000
>   > MediaType=Photo ripFeed=AutoSheet Pagesize=Letter topmargin=0.12
>   > leftmargin=5.75 scale-percent=100 Landscape=yes Resolution=1440
>   > ColorModel=QTRIP" "K:\ImagesK\MtEdithCavell21BWTest.tif"
>   > ".\bin\QuadToPrinter.exe" gui 0 0 1 "PPD=Quad4000.PPD 
PRINTER=Quad4000
>   > MediaType=Photo ripFeed=AutoSheet Pagesize=Letter 
Resolution=1440
>   > RipSpeed=hispeed ColorModel=QTRIP ripCurve1=UC-EPhotoPaper-
neutral
>   > ripCurve2=UC-EPhotoPaper-neutral ripBlend=50 stpDither=Ordered
>   > RipBlack=Photo ripGamma=0 ripLimit=0"
>   > ".\bin\RawPrint.exe" "EPSON Stylus Pro 4000" -
> "MtEdithCavell21BWTest.tif"
>   >
>   > ***** ImageToRaster Log *****
>   > Version 2.4.2.0
>   >
>   > INFO: .\bin\ImageToRaster.exe gui 0 0 1 PPD=Quad4000.PPD
>   > PRINTER=Quad4000 MediaType=Photo ripFeed=AutoSheet 
Pagesize=Letter
>   > topmargin=0.12 leftmargin=5.75 scale-percent=100 Landscape=yes
>   > Resolution=1440 ColorModel=QTRIP 
K:\ImagesK\MtEdithCavell21BWTest.tif
>   > PPDFILE = .\ppd\Quad4000.PPD
>   > DEBUG: Page = 612x792; 9,40 to 603,783
>   > DEBUG: Searching for profile "1440/Photo"...
>   > INFO: Loading image file...
>   > DEBUG: ImageOpen("K:\ImagesK\MtEdithCavell21BWTest.tif", 1, 1, 
100, 0,
>   > 0012F87C)
>   > calling ReadTIFF
>   > TIFFReadDirectory: Warning, 
K:\ImagesK\MtEdithCavell21BWTest.tif:
>   > wrong data type 1 for "XMLPacket"; tag ignored.
>   > TIFFReadDirectory: Warning, 
K:\ImagesK\MtEdithCavell21BWTest.tif:
Show quoted textHide quoted text
>   > unknown field with tag 34665 (0x8769) encountered.
>   > DEBUG: TIFF resolution = 288.000000x288.000000, units=2
>   > DEBUG: Stored resolution = 288x288 PPI
>   > DEBUG: orientation = top-left
>   > DEBUG: photometric = 1
>   > DEBUG: compression = 1
>   > DEBUG: Creating tile array (6x5)
>   > DEBUG: Image size 5.000 x 3.924
>   > DEBUG: Printable size 10.319 x 8.250
>   > DEBUG: Scaled size 5.000 x 3.924
>   > DEBUG: PageSize = [612 792] (8.50 11.00)
>   > DEBUG: cupsWidth = 5940
>   > DEBUG: cupsHeight = 7430
>   > DEBUG: cupsBitsPerColor = 8
>   > DEBUG: cupsBitsPerPixel = 8
>   > DEBUG: cupsBytesPerLine = 5940
>   > DEBUG: cupsColorOrder = 0
>   > DEBUG: cupsColorSpace = 0
>   > DEBUG: img->colorspace = 1
>   > INFO: Formatting page 1...
>   > x=(0,1439) y=(0,1129), temp=(2825,3600)
>   > top: ht=7430, sz=3600, y=90
>   > left: wd=5940, sz=2825, x=-24
>   > bottom: ht=7430, sz=3600, y=3740
>   >
>   > ***** QuadToPrinter Log *****
>   > Version 2.4.2.0
>   >
>   > PPDFILE = .\ppd\Quad4000.PPD
>   > NOTICE: QTR using curve file UC-EPhotoPaper-neutral
>   > NOTICE: QTR using curve file UC-EPhotoPaper-neutral
>   > PAGE: 1 1
>   > DEBUG: StartPage...
>   > DEBUG: MediaClass = "AutoSheet"
>   > DEBUG: MediaColor = ""
>   > DEBUG: MediaType = "Photo"
>   > DEBUG: OutputType = ""
>   > DEBUG: AdvanceDistance = 0
>   > DEBUG: AdvanceMedia = 0
>   > DEBUG: Collate = 0
>   > DEBUG: CutMedia = 0
>   > DEBUG: Duplex = 0
>   > NOTICE: HWResolution = [ 720 720 ]
>   > NOTICE: ImagingBoundingBox = [ 9 40 594 743 ]
>   > DEBUG: InsertSheet = 0
>   > DEBUG: Jog = 0
>   > DEBUG: LeadingEdge = 0
>   > NOTICE: Margins = [ 9 40 ]
>   > DEBUG: ManualFeed = 0
>   > DEBUG: MediaPosition = 0
>   > DEBUG: MediaWeight = 0
>   > DEBUG: MirrorPrint = 0
>   > DEBUG: NegativePrint = 0
>   > DEBUG: NumCopies = 1
>   > DEBUG: Orientation = 0
>   > DEBUG: OutputFaceUp = 0
>   > NOTICE: PageSize = [ 612 792 ]
>   > DEBUG: Separations = 0
>   > DEBUG: TraySwitch = 0
>   > DEBUG: Tumble = 0
>   > NOTICE: cupsWidth = 5940
>   > NOTICE: cupsHeight = 7430
>   > DEBUG: cupsMediaType = 0
>   > DEBUG: cupsBitsPerColor = 16
>   > DEBUG: cupsBitsPerPixel = 112
>   > DEBUG: cupsBytesPerLine = 83160
>   > DEBUG: cupsColorOrder = 0
>   > DEBUG: cupsColorSpace = 8
>   > DEBUG: cupsCompression = 0
>   > DEBUG: cupsRowCount = 0
>   > DEBUG: cupsRowFeed = 0
>   > DEBUG: cupsRowStep = 0
>   > DEBUG: PageSize = 612x792
>   > DEBUG: stp_get_output_to(v) ||
>   > DEBUG: stp_get_driver(v) |escp2-4000|
>   > DEBUG: stp_get_ppd_file(v) ||
>   > NOTICE: stp_get_resolution(v) |1440|
>   > DEBUG: stp_get_media_size(v) ||
>   > DEBUG: stp_get_media_type(v) |Photo|
>   > DEBUG: stp_get_media_source(v) |AutoSheet|
>   > DEBUG: stp_get_ink_type(v) ||
>   > NOTICE: stp_get_dither_algorithm(v) |Ordered|
>   > DEBUG: stp_get_output_type(v) |4|
>   > NOTICE: GIMP-PRINT w=612 l=9 r=603 h=792 t=783 b=40
>   > NOTICE: GIMP-PRINT w=5940 l=90 r=90 h=7430 t=90 b=400
>   > DEBUG: GIMP-PRINT: Image_height 7430
>   > DEBUG: GIMP-PRINT: Image_width 5940
>   > DEBUG: GIMP-PRINT: Image_width 5940
>   > DEBUG: GIMP-PRINT: Image_height 7430
>   > DEBUG: GIMP-PRINT: Image_width 5940
>   > DEBUG: GIMP-PRINT: Image_height 7430
>   > DEBUG: GIMP-PRINT: Image_height 7430
>   > INFO: Starting page 1...
>   > INFO: Printing page 1, 0%
>   > INFO: Printing page 1, 3%
>   > INFO: Printing page 1, 7%
>   > INFO: Printing page 1, 10%
>   > INFO: Printing page 1, 14%
>   > INFO: Printing page 1, 17%
>   > INFO: Printing page 1, 21%
>   > INFO: Printing page 1, 24%
>   > INFO: Printing page 1, 28%
>   > INFO: Printing page 1, 31%
>   > INFO: Printing page 1, 34%
>   > INFO: Printing page 1, 38%
>   > INFO: Printing page 1, 41%
>   > INFO: Printing page 1, 45%
>   > INFO: Printing page 1, 48%
>   > INFO: Printing page 1, 52%
>   > INFO: Printing page 1, 55%
>   > INFO: Printing page 1, 59%
>   > INFO: Printing page 1, 62%
>   > INFO: Printing page 1, 65%
>   > INFO: Printing page 1, 69%
>   > INFO: Printing page 1, 72%
>   > INFO: Printing page 1, 76%
>   > INFO: Printing page 1, 79%
>   > INFO: Printing page 1, 83%
>   > INFO: Printing page 1, 86%
>   > INFO: Printing page 1, 90%
>   > INFO: Printing page 1, 93%
>   > INFO: Printing page 1, 96%
>   > INFO: Printing page 1, 100%
>   > INFO: Finished page 1...
>   > INFO: Ready to print.
>   >
>   > ***** RawPrint Log *****
>   > Version 2.3.0.0
>   >
>   >
>   > ***** End of Log *****
>   >
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.