QTR-Quadtone RIP

Running OSX 10.3.9, printing using QTR on 17x22 centered paper.  The printing starts 
just fine and then about 1/3 into the print it stops, backs up to the top of the page, prints 
out some very light banding, skips down to the middle of the page and says it's out of 
paper.  Does anyone have a clue as to what is going on?

thanks,

Jim

Might want to try this USB patch for 10.3.x...I'm pretty sure it will fix the problem:

http://www.harrington.com/USB-Patch.sit


 "jamesdsteele2001" <photographybysteele@p...> wrote:

> Running OSX 10.3.9, printing using QTR on 17x22 centered paper.  The printing starts 
> just fine and then about 1/3 into the print it stops, backs up to the top of the page, prints 
> out some very light banding, skips down to the middle of the page and says it's out of 
> paper.  Does anyone have a clue as to what is going on?
> 
> thanks,
> 
> Jim

John

Many thanks.  I'll give it a try.

Jim


--- In QuadtoneRIP@yahoogroups.com, "John Vitollo" <jvlist@c...> wrote:
> Might want to try this USB patch for 10.3.x...I'm pretty sure it will fix the problem:
> 
> http://www.harrington.com/USB-Patch.sit
> 
> 
>  "jamesdsteele2001" <photographybysteele@p...> wrote:
> > Running OSX 10.3.9, printing using QTR on 17x22 centered paper.  The printing 
starts 
> > just fine and then about 1/3 into the print it stops, backs up to the top of the page, 
prints 

> > out some very light banding, skips down to the middle of the page and says it's out of 
> > paper.  Does anyone have a clue as to what is going on?
> > 
> > thanks,
> > 
> > Jim

I use 10.3.9 & a 4000, & have a similar problem - printing about 2/3 of the page, then 
going back to the beginning & over-printing - an expensive waste of paper.

I downloaded the patch, but found that the 4000 isn't listed as one of the printers it fixes.

An oversight in the list?  Nobody else with a 4000 has this problem?  Or is a 4000 version 
on the way?

"Kirk Thompson"  wrote:
> I use 10.3.9 & a 4000, & have a similar problem - printing about 2/3 of the page, then 
> going back to the beginning & over-printing - an expensive waste of paper.
> I downloaded the patch, but found that the 4000 isn't listed as one of the printers it fixes.
> An oversight in the list?  Nobody else with a 4000 has this problem?  Or is a 4000 version 
> on the way?

The patch fixes the feeding problem with the 4000. Here's a copy + paste from the below 
link regarding the patch. "This also appears to fix the 4000 problem of misfeeding paper."

http://www.harrington.com/QuadToneRIP.html

Forgot to add that the patch fixed my client's 4000 feeding problem. It fixed James Steele 
4000 also...but it added a new problem.

> The patch fixes the feeding problem with the 4000. Here's a copy + paste from the below 
> link regarding the patch. "This also appears to fix the 4000 problem of misfeeding paper."
> 
> http://www.harrington.com/QuadToneRIP.html