QTR-Quadtone RIP

Since Scott Graham has passed the baton to me, I thought I'd update
the group description on it's home page. While I was there I decided
to clarify the group guidelines. There's no real change except for the
elaboration of the guideline on requesting help - see item 4 in the
guidlines. Since I'm quite sure that few, if any, of you visit the
list home page regularly to check for changes, I thought I'd let you
know about the update. Here's the link:

http://tech.groups.yahoo.com/group/QuadtoneRIP/

Tom Moore

This is a question for Roy or anybody else that might have some info about  
it. I have downloaded the newest version of QTR and I am trying to keep up  
with the newest QTRGui. I have just started getting a memory error from  
ImageToRaster.exe. This is with Win2000 on an Athlon 64 X2 3800+. I have  
not been getting this until just recently. It seems to pop up at the end  
of the conversion while it is still printing. the printing will stop and  
starts again when I click on the OK to terminate the program. The print  
seems to come out fine. the error message says:

  The instruction at "0x77fcb940" referenced memory at "0x30303030". The  
memory could not be "written". Click on OK to terminate the program

I can send a screen capture of the error if needed. the instruction  
address is always the same but sometimes the memory is all 0s.

Thanks,
Steve Taylor

-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

Steve, Don't know the answer but just wanted to let you know I'm 
experiencing the same thing.  I'm running WinXP with Athlon 64.  Error msg 
just started also.  Am new to QTRGui and if I continue experiencing this 
I'll do some research.  Doesn't really keep me from getting good print but 
just an irritation.  I'll keep your email in case I come up with a solution 
or more info.  Pat McVicker   patmcvicker@...



----- Original Message ----- 

From: "Steve and Ann Taylor" <taylorfamily3688@...>
To: <QuadtoneRIP@yahoogroups.com>
Sent: Monday, February 12, 2007 6:40 PM
Subject: [QuadtoneRIP] Memory reference error


> This is a question for Roy or anybody else that might have some info about
> it. I have downloaded the newest version of QTR and I am trying to keep up
> with the newest QTRGui. I have just started getting a memory error from
> ImageToRaster.exe. This is with Win2000 on an Athlon 64 X2 3800+. I have
> not been getting this until just recently. It seems to pop up at the end
> of the conversion while it is still printing. the printing will stop and
> starts again when I click on the OK to terminate the program. The print
> seems to come out fine. the error message says:
>
>  The instruction at "0x77fcb940" referenced memory at "0x30303030". The
> memory could not be "written". Click on OK to terminate the program
>
> I can send a screen capture of the error if needed. the instruction
> address is always the same but sometimes the memory is all 0s.
>
> Thanks,
> Steve Taylor
>
> -- 
> Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
>
>
>
> Yahoo! Groups Links
>
>
>
>

Pat, thanks for the info. I was begining to think it was just me.  
Hopefully some else will join in with a solution.
Steve


On Wed, 14 Feb 2007 11:51:42 -0800, Pat McVicker <patmcvicker@...>  
wrote:

> Steve, Don't know the answer but just wanted to let you know I'm
> experiencing the same thing.  I'm running WinXP with Athlon 64.  Error  
> msg
> just started also.  Am new to QTRGui and if I continue experiencing this
> I'll do some research.  Doesn't really keep me from getting good print  
> but
> just an irritation.  I'll keep your email in case I come up with a  
> solution
> or more info.  Pat McVicker   patmcvicker@...
>
>
>
> ----- Original Message -----
> From: "Steve and Ann Taylor" <taylorfamily3688@...>
> To: <QuadtoneRIP@yahoogroups.com>
> Sent: Monday, February 12, 2007 6:40 PM
> Subject: [QuadtoneRIP] Memory reference error
>
>
>> This is a question for Roy or anybody else that might have some info  
>> about
>> it. I have downloaded the newest version of QTR and I am trying to keep  
>> up
>> with the newest QTRGui. I have just started getting a memory error from
>> ImageToRaster.exe. This is with Win2000 on an Athlon 64 X2 3800+. I have
>> not been getting this until just recently. It seems to pop up at the end
>> of the conversion while it is still printing. the printing will stop and
>> starts again when I click on the OK to terminate the program. The print
>> seems to come out fine. the error message says:
>>
>>  The instruction at "0x77fcb940" referenced memory at "0x30303030". The
>> memory could not be "written". Click on OK to terminate the program
>>
>> I can send a screen capture of the error if needed. the instruction
>> address is always the same but sometimes the memory is all 0s.
>>
>> Thanks,
>> Steve Taylor
>>
>> --
>> Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
>
> Yahoo! Groups Links
>
>
>



-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/