QTR-Quadtone RIP

Hello all,
  I have an Epson 7000 with K6 inks. I just updated to Leopard and went the the QTR page 
and installed the latest version of QTR as well as the patch. WHen I go to print everything 
works and the printer queue show the file printing, finishing, but nothing happens with the 
printer. I've tried restarting the computer, and printing with CS2 instead of CS3. No luck. 
   Just wondering if anyone else has had problems, or knows of any fixes. Thanks for your 
help. 

Thomas

It is working fine for me.

James

On Nov 11, 2007, at 11:02 PM, tetontommy wrote:

> Hello all,
> I have an Epson 7000 with K6 inks. I just updated to Leopard and  
> went the the QTR page
> and installed the latest version of QTR as well as the patch. WHen  
> I go to print everything
> works and the printer queue show the file printing, finishing, but  
> nothing happens with the
> printer. I've tried restarting the computer, and printing with CS2  
> instead of CS3. No luck.
> Just wondering if anyone else has had problems, or knows of any  
> fixes. Thanks for your
> help.
>
> Thomas
>
>
> 



[Non-text portions of this message have been removed]

Did you re-install the curves?

Or, if you are using the pre-installed curves, did you choose the  
curves in the print driver?

James



On Nov 11, 2007, at 11:02 PM, tetontommy wrote:

> Hello all,
> I have an Epson 7000 with K6 inks. I just updated to Leopard and  
> went the the QTR page
> and installed the latest version of QTR as well as the patch. WHen  
> I go to print everything
> works and the printer queue show the file printing, finishing, but  
> nothing happens with the
> printer. I've tried restarting the computer, and printing with CS2  
> instead of CS3. No luck.
> Just wondering if anyone else has had problems, or knows of any  
> fixes. Thanks for your
> help.
>
> Thomas
>
>
> 



[Non-text portions of this message have been removed]

Yes, I reinstalled curves ( just did it again to be sure) All the settings seem to be correct, 
and that is what has me confused. The information goes to the printer in the OS printer 
window, and shows 13% or some number and then says done, but no activity at the 
printer. 

thanks
thomas


--- In QuadtoneRIP@yahoogroups.com, James Haney <lists@...> wrote:

>
> Did you re-install the curves?
> 
> Or, if you are using the pre-installed curves, did you choose the  
> curves in the print driver?
> 
> James
> 
> 
> 
> On Nov 11, 2007, at 11:02 PM, tetontommy wrote:
> 
> > Hello all,
> > I have an Epson 7000 with K6 inks. I just updated to Leopard and  
> > went the the QTR page
> > and installed the latest version of QTR as well as the patch. WHen  
> > I go to print everything
> > works and the printer queue show the file printing, finishing, but  
> > nothing happens with the
> > printer. I've tried restarting the computer, and printing with CS2  
> > instead of CS3. No luck.
> > Just wondering if anyone else has had problems, or knows of any  
> > fixes. Thanks for your
> > help.
> >
> > Thomas
> >
> >
> > 
> 
> 
> 
> [Non-text portions of this message have been removed]
>

How is the printer connected?

USB, Ethernet?

And, how did you set the printer up?

My 7600 is setup on ethernet and I use it over appletalk and ip.

I have had problems with Bonjour printers.

Keep a sharp eye on the print queue. Usually the queue with flash up  
a meaningful message for an instant before aborting the job.

There is also a way of looking into the system logs to figure out  
what is going on but it gets pretty geeky.

James



On Nov 12, 2007, at 11:26 AM, tetontommy wrote:

> Yes, I reinstalled curves ( just did it again to be sure) All the  
> settings seem to be correct,
> and that is what has me confused. The information goes to the  
> printer in the OS printer
> window, and shows 13% or some number and then says done, but no  
> activity at the
> printer.
>
> thanks
> thomas
>
> --- In QuadtoneRIP@yahoogroups.com, James Haney <lists@...> wrote:
> >
> > Did you re-install the curves?
> >
> > Or, if you are using the pre-installed curves, did you choose the
> > curves in the print driver?
> >
> > James
> >
> >
> >
> > On Nov 11, 2007, at 11:02 PM, tetontommy wrote:
> >
> > > Hello all,
> > > I have an Epson 7000 with K6 inks. I just updated to Leopard and
> > > went the the QTR page
> > > and installed the latest version of QTR as well as the patch. WHen
> > > I go to print everything
> > > works and the printer queue show the file printing, finishing, but
> > > nothing happens with the
> > > printer. I've tried restarting the computer, and printing with CS2
> > > instead of CS3. No luck.
> > > Just wondering if anyone else has had problems, or knows of any
> > > fixes. Thanks for your
> > > help.
> > >
> > > Thomas
> > >
> > >
> > >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
> 



[Non-text portions of this message have been removed]

You have to uninstall all QTR (make sure you save your custom curves), then reinstall, then install the curves.  I had the same problem until I did this and fixed it with no problems.

Mike


[Non-text portions of this message have been removed]

James,
  First, thanks for your help. I am connected via USB.
Curves are selected in QTR. I am printing to a roll of
paper with Roll Auto Cut selected on printer, and Roll
Cutter On selected in QTR. 
QTR sends the job to the queue, but it is not really
processed. It sits there for a minute and disappears.
No sign of any activity with the printer during this
process. 

Thanks for your help.
thomas

--- James Haney <lists@...> wrote:

> How is the printer connected?
> 
> USB, Ethernet?
> 
> And, how did you set the printer up?
> 
> My 7600 is setup on ethernet and I use it over
> appletalk and ip.
> 
> I have had problems with Bonjour printers.
> 
> Keep a sharp eye on the print queue. Usually the
> queue with flash up  
> a meaningful message for an instant before aborting
> the job.
> 
> There is also a way of looking into the system logs
> to figure out  
> what is going on but it gets pretty geeky.
> 
> James
> 
> 
> 
> On Nov 12, 2007, at 11:26 AM, tetontommy wrote:
> 
> > Yes, I reinstalled curves ( just did it again to
> be sure) All the  
> > settings seem to be correct,
> > and that is what has me confused. The information
> goes to the  
> > printer in the OS printer
> > window, and shows 13% or some number and then says
> done, but no  
> > activity at the
> > printer.
> >
> > thanks
> > thomas
> >
> > --- In QuadtoneRIP@yahoogroups.com, James Haney
> <lists@...> wrote:
> > >
> > > Did you re-install the curves?
> > >
> > > Or, if you are using the pre-installed curves,
> did you choose the
> > > curves in the print driver?
> > >
> > > James
> > >
> > >
> > >
> > > On Nov 11, 2007, at 11:02 PM, tetontommy wrote:
> > >
> > > > Hello all,
> > > > I have an Epson 7000 with K6 inks. I just
> updated to Leopard and
> > > > went the the QTR page
> > > > and installed the latest version of QTR as
> well as the patch. WHen
> > > > I go to print everything
> > > > works and the printer queue show the file
> printing, finishing, but
> > > > nothing happens with the
> > > > printer. I've tried restarting the computer,
> and printing with CS2
> > > > instead of CS3. No luck.
> > > > Just wondering if anyone else has had
> problems, or knows of any
> > > > fixes. Thanks for your
> > > > help.
> > > >
> > > > Thomas
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been
> removed]
> > >
> >
> >
> > 
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Be a better sports nut!  Let your teams follow you 
with Yahoo Mobile. Try it now.  http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ

I thought to try this, but when I clicked on QTR
uninstall it said I had a newer version of QTR and the
uninstall could not be preformed. I assume the newer
version is the patch I installed. 
Is there a way to manually uninstall? 

Thanks
thomas


--- Michael Tiktinsky <mt_photographer@...>
wrote:

> You have to uninstall all QTR (make sure you save
> your custom curves), then reinstall, then install
> the curves.  I had the same problem until I did this
> and fixed it with no problems.
> 
> Mike
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Get easy, one-click access to your favorites. 
Make Yahoo! your homepage.
http://www.yahoo.com/r/hs

Hey everyone. I'm up and working again. I went into my
printer list. Deleted my Quad7000 and reinstalled QTR
and the patch. That seemed to do the trick. 

Thanks to everyone for your help.

Thomas

--- tetontommy <tetontommy@...> wrote:

> Yes, I reinstalled curves ( just did it again to be
> sure) All the settings seem to be correct, 
> and that is what has me confused. The information
> goes to the printer in the OS printer 
> window, and shows 13% or some number and then says
> done, but no activity at the 
> printer. 
> 
> thanks
> thomas
> 
> 
> --- In QuadtoneRIP@yahoogroups.com, James Haney
> <lists@...> wrote:
> >
> > Did you re-install the curves?
> > 
> > Or, if you are using the pre-installed curves, did
> you choose the  
> > curves in the print driver?
> > 
> > James
> > 
> > 
> > 
> > On Nov 11, 2007, at 11:02 PM, tetontommy wrote:
> > 
> > > Hello all,
> > > I have an Epson 7000 with K6 inks. I just
> updated to Leopard and  
> > > went the the QTR page
> > > and installed the latest version of QTR as well
> as the patch. WHen  
> > > I go to print everything
> > > works and the printer queue show the file
> printing, finishing, but  
> > > nothing happens with the
> > > printer. I've tried restarting the computer, and
> printing with CS2  
> > > instead of CS3. No luck.
> > > Just wondering if anyone else has had problems,
> or knows of any  
> > > fixes. Thanks for your
> > > help.
> > >
> > > Thomas
> > >
> > >
> > > 
> > 
> > 
> > 
> > [Non-text portions of this message have been
> removed]
> >
> 
> 
> 
> 



      ____________________________________________________________________________________
Be a better sports nut!  Let your teams follow you 
with Yahoo Mobile. Try it now.  http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ

Excellent!

Happy printing!

James


On Nov 13, 2007, at 12:07 PM, Thomas Stimpson wrote:

> Hey everyone. I'm up and working again. I went into my
> printer list. Deleted my Quad7000 and reinstalled QTR
> and the patch. That seemed to do the trick.
>
> Thanks to everyone for your help.
>
> Thomas
>
> --- tetontommy <tetontommy@...> wrote:
>
> > Yes, I reinstalled curves ( just did it again to be
> > sure) All the settings seem to be correct,
> > and that is what has me confused. The information
> > goes to the printer in the OS printer
> > window, and shows 13% or some number and then says
> > done, but no activity at the
> > printer.
> >
> > thanks
> > thomas
> >
> >
> > --- In QuadtoneRIP@yahoogroups.com, James Haney
> > <lists@...> wrote:
> > >
> > > Did you re-install the curves?
> > >
> > > Or, if you are using the pre-installed curves, did
> > you choose the
> > > curves in the print driver?
> > >
> > > James
> > >
> > >
> > >
> > > On Nov 11, 2007, at 11:02 PM, tetontommy wrote:
> > >
> > > > Hello all,
> > > > I have an Epson 7000 with K6 inks. I just
> > updated to Leopard and
> > > > went the the QTR page
> > > > and installed the latest version of QTR as well
> > as the patch. WHen
> > > > I go to print everything
> > > > works and the printer queue show the file
> > printing, finishing, but
> > > > nothing happens with the
> > > > printer. I've tried restarting the computer, and
> > printing with CS2
> > > > instead of CS3. No luck.
> > > > Just wondering if anyone else has had problems,
> > or knows of any
> > > > fixes. Thanks for your
> > > > help.
> > > >
> > > > Thomas
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been
> > removed]
> > >
> >
> >
> >
> >
>
> __________________________________________________________
> Be a better sports nut! Let your teams follow you
> with Yahoo Mobile. Try it now.http://mobile.yahoo.com/ 
> sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ
>
>
> 



[Non-text portions of this message have been removed]