QTR-Quadtone RIP

hi,
i'm trying to use Metoasure tool to calibrate the final linearization
of my curve.
I downloaded the profilemaker version 5.0.8 and installed it.

I'm reading the tutorial that i have found in the quadtoneRIP 2.6.1
named Eye-One-ReadMe.pdf.
In the tutorial i follow this step:

Scanning using MeasureTool
1) Run MeasureTool, only demo mode is needed, there is no need for a
dongle.
2) Click on the Configuring box and select Eye-One and Reflection, not
Spectral. Below is should say OK in small letters.
3) Click on the Measuring -- Chart box.
.........

i have problem to find in the configuration box the item Eye-One.
I found 
     Eye-One Display(CRT)
     Eye-One Display(LCD)
     Eye-One iO
     Eye-One iSis
     Eye-One Pro
and with no one of these i can click on Measuring -- Chart box because
is not allowed.

have someone suggestion?

thanks
Paolo

-Hi,  I was just having the same problem and the solution is to close the "Instrument 
Configuration" box.  This will allow you to use the "Measuring" tool in Profilemaker.  
However, your problems are not yet over.  See my post #6437.  There is another post 
relating to same problems, without much help form users.  It is post # 5571.

Good luck,

DD

Unless you have better luck figuring out the solution here, this is a deadend.-- In 
QuadtoneRIP@yahoogroups.com, "paolovertullo" <paolovertullo@...> wrote:

>
> hi,
> i'm trying to use Metoasure tool to calibrate the final linearization
> of my curve.
> I downloaded the profilemaker version 5.0.8 and installed it.
> 
> I'm reading the tutorial that i have found in the quadtoneRIP 2.6.1
> named Eye-One-ReadMe.pdf.
> In the tutorial i follow this step:
> 
> Scanning using MeasureTool
> 1) Run MeasureTool, only demo mode is needed, there is no need for a
> dongle.
> 2) Click on the Configuring box and select Eye-One and Reflection, not
> Spectral. Below is should say OK in small letters.
> 3) Click on the Measuring -- Chart box.
> .........
> 
> i have problem to find in the configuration box the item Eye-One.
> I found 
>      Eye-One Display(CRT)
>      Eye-One Display(LCD)
>      Eye-One iO
>      Eye-One iSis
>      Eye-One Pro
> and with no one of these i can click on Measuring -- Chart box because
> is not allowed.
> 
> have someone suggestion?
> 
> thanks
> Paolo
>