QTR-Quadtone RIP

Hello,

looking in the EYE-ONE folder, I saw a file named munki-21steps.tif, which led me to the assumption with release 2.7 the colormunki is now officially supported. I've read the supplied tutorial and readme's but the munki was not mentioned in this documents. Using the munki with MesasureTool also seems not supported. Help would be very appreciated, thank you.

Best regards,

Martin

There is some guidance on using the colormunki with QTR here:

http://www.northlight-images.co.uk/article_pages/bw_printing/bw_print_colormunki.html

Howard

--
Howard Shaw
glassman@...
www.howardshaw.org

On 20/04/2010 14:03, makieb@... wrote:
> Hello,
>
> looking in the EYE-ONE folder, I saw a file named munki-21steps.tif, which led me to the assumption with release 2.7 the colormunki is now officially supported. I've read the supplied tutorial and readme's but the munki was not mentioned in this documents. Using the munki with MesasureTool also seems not supported. Help would be very appreciated, thank you.
>
> Best regards,
>
> Martin
>
>

Hi All,
> 


Just did the 2.7 upgrade, QUad MAc Pro 10.6.3 & although I had them for initial try, all the Curves do not show up. I reinstalled from the Curves folder, to no avail.

Any tricks to make them show up?

Thanks,

Skip



[Non-text portions of this message have been removed]

Hello Howard,

thank's for your hint. I was aware about this tutorial and tried it a few month's ago, but without success. I stopped trying as the tutorial is from 2008 thinking it may not be compatible with QTR 2.6/2.7. Today I tried again and found out that QTR-Create-ICC now is compatible with the csv-Output from Colormunki's Photo ColorPicker so the workaround with a spreadsheet application is not necessary anymore. That was part where I failed with the northlight tutorial. I will try to print with the new profile later this day.

Best regards,

Martin

--- In QuadtoneRIP@yahoogroups.com, Howard Shaw <glassman@...> wrote:

>
> There is some guidance on using the colormunki with QTR here:
> 
> http://www.northlight-images.co.uk/article_pages/bw_printing/bw_print_colormunki.html
> 
> Howard
> 
> --
> Howard Shaw
> glassman@...
> www.howardshaw.org
> 
> 
> 
> On 20/04/2010 14:03, makieb@... wrote:
> > Hello,
> >
> > looking in the EYE-ONE folder, I saw a file named munki-21steps.tif, which led me to the assumption with release 2.7 the colormunki is now officially supported. I've read the supplied tutorial and readme's but the munki was not mentioned in this documents. Using the munki with MesasureTool also seems not supported. Help would be very appreciated, thank you.
> >
> > Best regards,
> >
> > Martin
> >
> >
>