Roland System 100m

Step by Step ...
Ask fews questions to yourself...
First, Do I have a sound prolbem ?
- Just connect 1 VCO Output on the input jack
converter on your Patch. 
- If there is no sound, try another VCO (i fyou have
one) or try another jack input for level your amp.
- If you get some sounds, it's okay so VCo it's right,
check the VCF (Do you see the green light in the VCF)
and check the VCA.
- You must connect your CV from Key to the voltage
contral of the VCO (downstairs !) and your gate must
be connected to  the Env Generator, and this env must
be connected to the voltage control section of the
VCA. Normally this is very basic and must worked. 
- Try the VCF, that the low pass filter is not down

NICOLAS from PARIS

--- sean mcbride <mcanterel@...> a \ufffdcrit :


---------------------------------
very basically...
start with a cord from vco1(112) out into vcf1 in 
(121) then vcf out into vca 1(130) in then vca out
into jack 1 then convert to 1/4" then out to
speakers...Now take your env1(140) out and plug into
vca mod in, raise slider.  take your other env1 out
and plug into the 2nd mod in of your vcf, raise
slider; make sure your env is set to [gate +trig]
mode...this allows the 184 information to be
communicated to the env as the 100m is hard-wired for
certain basic patching...hope this works for
you...this is the first patch I set up when I got
mine...
Sean


            
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 
      

      SPONSORED LINKS  
                                                Music
sampler                                    Music
synthesizers                                   
Synthesizer music                                     
                          Synthesizer                 
                  Sampler                             
         
    
---------------------------------
  YAHOO! GROUPS LINKS

  
    Visit your group "RolandSystem100m" on the web.
   
    To unsubscribe from this group, send an email to:
 RolandSystem100m-unsubscribe@yahoogroups.com
   
    Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.

  
---------------------------------





	

	
		
___________________________________________________________________________ 
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger 
T\ufffdl\ufffdchargez cette version sur http://fr.messenger.yahoo.com