Roland System 100m

I'm in the same bind.  I just bought 10 modules mounted in a 191J 
each (2) and there are no din cables :-(  I've found a local parts 
dealer for 8 pin circular din, but need to find (think I did on 
Analoghell) the pin outs for the cables.

Can anyone confirm?

Bodie

--- In RolandSystem100m@yahoogroups.com, damon <damon@...> wrote:
>
> Hey man,
> 
> If you can find the ends somewhere, any local electronics repair 
shop  
> in your yellow pages should be able to wire them up for you for a  
> nominal fee...
> 
> I'll do it for you after I move (mid-may) if you're not sorted by 
then.
> 
> Cheers,
> 
> Damon
> 
> On Apr 16, 2006, at 11:28 PM, roberttraum wrote:
> 
> > Yikes.
> >
> > Does anyone know if there are any one can buy already 
manufactured  
> > that are wired
> > correctly?
> >
> > Also -- I was testing the 100M out today, using the existing 
cables  
> > (there are only 2! 3
> > missing, although he says he probably has them "somewhere") to  
> > power up the modules.
> > Is the 100M pretty safe as far as pulling and plugging these 
power  
> > cables while the 100m
> > is running?  I.e., you can plug/unplug at these cables at will 
w/o  
> > damaging the synth?
> > (They seem to be notched so that you can't plug them in wrong).   
> > Don't want to fuck up
> > the synth.
> >
> > On another note -- how reparable is the 100M?  I have a former  
> > Roland tech in the
> > neighborhood, so he should be qualified to work on them (he 
worked  
> > at Roland Japan,
> > early 80's).  But are parts available if something goes wrong?
> >
> > I know that, for instance, the SCI Pro One has a main chip that 
if  
> > it goes bad, well, that's
> > the synth.  No more parts available, ever.
> >
> > Robert
> >
> > --- In RolandSystem100m@yahoogroups.com, david korn <dkorn@> 
wrote:
> > >
> > > No, and you'd better not try with this or that cable that look 
alike
> > > --these cables supply  the power to the modules, so you could  
> > fuck up
> > > your synth. Get someone to solder them for you using the scheme
> > > described in the last post!
> > >
> > > >Thanks -- I'm afraid I"m not very DIY with electronics, though.
> > > >
> > > >Would these be the same cables used for DIN Sync?  I know HOSA 
Midi
> > > >cables function for
> > > >that as well.
> > > >
> > > >Robert
> > > >
> > > >
> > > >
> > > >
> > > >SPONSORED LINKS
> > > ><http://groups.yahoo.com/gads?
> > t=ms&k=Music+sampler&w1=Music+sampler&w2=Music 
> > +synthesizers&w3=Synthesizer
> > +music&w4=Sampler&c=4&s=79&.sig=hc9xCPkXzzdNWRHibPZApQ>Music
> > > >sampler
> > > ><http://groups.yahoo.com/gads?
> > t=ms&k=Music+synthesizers&w1=Music+sampler&w2=Music 
> > +synthesizers&w3=Synthesi
> > zer+music&w4=Sampler&c=4&s=79&.sig=2Vb7gWoMw5sUY3DcS2zScA>Music
> > > >synthesizers
> > > ><http://groups.yahoo.com/gads?
> > t=ms&k=Synthesizer+music&w1=Music+sampler&w2=Music 
> > +synthesizers&w3=Synthesi
> > 
zer+music&w4=Sampler&c=4&s=79&.sig=zcWFtuqMYsRz1SxVMWGgrw>Synthesizer
> > > >music
> > > ><http://groups.yahoo.com/gads?
> > 
t=ms&k=Sampler&w1=Music+sampler&w2=Music+synthesizers&w3=Synthesizer 
> > +music
> > &w4=Sampler&c=4&s=79&.sig=Luf8x1J6dIN8D_3s1pjRkw>Sampler
> > > >
> > > >
> > > >YAHOO! GROUPS LINKS
> > > >
> > > >  Visit your group
> > > 
>"<http://groups.yahoo.com/group/RolandSystem100m>RolandSystem100m"
> > > >on the web.
> > > >
> > > >  To unsubscribe from this group, send an email to:
> > > >
> > > ><mailto:RolandSystem100m-unsubscribe@yahoogroups.com?
> > subject=Unsubscribe>RolandSystem100m-unsubscribe@yahoogroups.com
> > > >
> > > >  Your use of Yahoo! Groups is subject to the
> > > ><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
> > >
> > >
> > > --
> > >
> > >
> > > **************************************
> > > david korn - that french journalist  *  stereo is bourgeois
> > > **************************************
> > >
> >
> >
> >
> >
> >
> > YAHOO! GROUPS LINKS
> >
> >  Visit your group "RolandSystem100m" on the web.
> >
> >  To unsubscribe from this group, send an email to:
> >  RolandSystem100m-unsubscribe@yahoogroups.com
> >
> >  Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.
> >
> >
>