I have a panel coming that has four ADSRs in it and a DTG. The DTG is split in half so that one half has the "sig in" jack and the other half has a "cycle" switch. The gate out is hard wired to the trigger in of all the ADSRs. Eash one of those has a two postiton switch which enables it to be tied into that DTG hardwire. So i can have any combination of ADSRs linked to the gate of the DTG.
I'm about to order a NTO panel with a BUFF as the starting left side module. Each NTO will have a three position switch that will connect it to either the top or bottom half of the BUFF. Center position will be "off".
What say ye all??
kind regards
john duval
-------------- Original message --------------
Anybody care to share some mods they like, or would like to see?
I would like to see, instead of the 1v/oct input on the DSG, a red-logic
input that when "high", causes the DSG to oscillate as if GATE OUT and
TRIG IN were tied together with a patchcord. This would give you the
ability to generate integral numbers of waveform cycles. Sort of like a
burst generator. I think I've had other patches set up to do something
like this but it's tricky just using stock modules.
--
m/n/m/l
surreal electronic music, sound, noise
http://mnml.soulcatcher.net
Keep on Patchin'!