SergeModular

Thanks;

For some strange reason hotmail has been bouncing my emails been empty!

Could anyone send me more animal panel patches,please? I´m still learning
it...

best!

> "Turbotron,"
>
> Congrats on your Animal panel. I, too, started with an Animal and
> found hours of enjoyment with this panel alone - though you *will*
> want more eventually, I assure you! :-)
>
> Here's a relatively simple Animal rhythm patch to get you going:
>
> Patch:
> SSG Smooth Cycle -> SSG Smooth In
> SSG Smooth Out -> DTG #1 VC In
> DTG #1 Gate Out -> DTG #1 Trog In AND DTG #1 Trig In
> DTG #1 Output -> Mixer In 3
> Mixer Out -> Variable Q VC-F In
> DTG #2 Output -> Variable Q Trig In
> Variable Q Band Out -> UAP Input 2
>
> Pot Settings:
> Mixer level 3 full on with phase switch to negative (-)
> SSG Smooth Rate about 11 o'clock
> DTG #1 Rise about 1 o'clock
> DTG #1 Fall about 5 o'clock
> DTG #1 VC Pot about 10 o'clock
> DTG #2 Rise about 5 o'clock
> DTG #2 Fall about 11 o'clock
> Variable Q in Hi mode
> Variable Q Resonance about 2 o'clock
> Variable Q Frequency about 10 o'clock
> Variable Q VC-F about 2 o'clock
> UAP Mode and Gain to suit your monitoring situation
>
> If my patch sheet is accurate, you should now hear a resonant,
> creaking rhythm, and you can tweak the pot sttings of the DTG,
> Mixer, and Variable Q to further vary the rhythm and timbre.
>
> Note that this patch completely ignores the Animal's oscillators,
> wave multipliers, the stepped section of the SSG, AND there's no
> modulation of the UAP at all. Try adding several of these elements
> yourself to build an even more complex patch!
>
> Best,
>
> Chris Sawyer