Attachments :
I appreciate the encouragement, though. I've sent a couple of e-mails to Tony, too. I hope he can help me sort this out. Next thing to do is measure the CV outs with a multimeter.
Is there also a good way to test that something's successfully grounded? I mean, I have no real reason to doubt it's not but I'm the second owner of all this stuff so you never know...
Also, should the shield be disconnected on the quarter inch end of my adapter cable?
Thanks!
-------------- Original message ----------------------
From: darkstr1746@...
Is there also a good way to test that something's successfully grounded? I mean, I have no real reason to doubt it's not but I'm the second owner of all this stuff so you never know...
Also, should the shield be disconnected on the quarter inch end of my adapter cable?
Thanks!
-------------- Original message ----------------------
From: darkstr1746@...
> i had a expressionist for three years and ued it to drive my Serge with no
> problems whatso ever. check for grounding problems or bad cable. I had mine
> hooked up to dual CVI modules that gave me visual status to CV and Gate
> functions. Frivolous for most users here i'm sure but i found it invaluable. . .
> being a visual type of person. Anyway check your cables, grounding and setting
> on the expressionist. Or call Rex. He has used these i believe, or call Tony.
> kind regards\john duval
> sorry i can't be of more assistance
>
> -------------- Original message --------------
> From: "simulacreant" <mrcarp@...>
>
> Has anyone had any luck getting an Expressionist to work with a Serge?
> I've tried two different types of 1/4" to banana cable and fooled with
> the Expressionists settings quite a bit and I get all kinds of erratic
> behavior. Even a 1/4" to banana cable connected to the 1V/OCT, or VC F
> inputs generates a sort of FM -- probably from the noise of an open
> connection.
>
>