SergeModular

if you have some audio coming into the UAP, and use
the DUSG output as the control input to the UAP (vc
1&2), you should be able to adjust the gain knob on
the UAP until the output is silent unless the DUSG is
triggered. make sure you have the UAP switch in the
correct position for the input and output you are
using. in this case i would use input 1 and output 1,
and set the switch for dual vca. hope that works for
you.

--- amnesia <amni56@...> wrote:

> From the DUSG I was sending the output into either
> the Audio Mixer or
> the UAP
>
>
>
> Skot Wiedmann wrote:
> >
> > are you using a VCA?
> >
> > --- cray5656 <amni56@...
> <mailto:amni56%40tpg.com.au>> wrote:
> >
> > > Hi all
> > >
> > > I have finally had some time to go thru the Gold
> > > Book, well most of
> > > it...one thing I am still unsure about.
> > >
> > > I have the TKB - KP out to the DUSG Trig In, and
> I
> > > can hear an
> > > attack/decay but i still have a continous drone
> > > underneath...how can
> > > you stop the done part of the sound without an
> ADSR?
> > > ( I do have a
> > > Doepfer Quad ADSR, but would like to try and do
> it
> > > in the Serge.
> > >
> > > TIA
> > >
> > >
> > >
> > >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com <http://mail.yahoo.com>
> >
> >
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com