SergeModular

Matthew,

I'd certainly like to have the two other serge vcf's but as we all know
16" is never enough ;)

also i've got a few other filter modules i use with the Serge, - mainly
two multimode vcf's from
the roland system 700.

The matrix mixer is VERY handy for things like this, - routing audio
in and out of the serge.
With the dual vca module and the matrix mixer i recently had a patch
where i had the roland filter
routed back to itself giving extra resonance under voltage control.
Or i use it with a tape-echo or my eventide or lexicon.

I'll get the other serge vcf's sometime in the future but for now i can
do without..

On May 31, 2007, at 12:53 AM, matthew carpenter wrote:

> Well, I haven't had a use for a quantizer. I would rather use the
> space for something like a Boolean Logic or Schmitt Trigger. I'm
> interested in creating very stupid artificial intelligence or
> something like that. That, and having all of the Serge manglers and
> filters! That's what you're lacking. That's an interesting and very
> nice selection. How is the matrix mixer? I just noticed that you have
> the VCFQ(X) and EQ but no VCF2 or VCFS. Maybe your Filter is my
> Quantizer?
>
>
> On 5/30/07, Kim Hansen <kimgh@...> wrote:
>> sequencer panel later ?
>>
>>
>> I was also in the process of planning a custom panel
>> when Rex's mail dropped, - so i've just ordered it before the
>> deadline.
>> I'd been planning and giving it a lot of thought for some time now,
>> so i'm pretty confident that it's the layout i want - but i'd still
>> like all you fellow sergers comments and advice.
>>
>> what i've ordered:
>>
>> QUAN(tkb) - PCO - NCOM - PDIV - RS - SSG - CVPRO - DSG - ADSR
>>
>> what i've already got:
>>
>> panel #1:
>>
>> PNRV - NTO - PCO - RING - VCM - AMX - VCFQX - DTG - UAP
>>
>> panel #2:
>>
>> FRS - CM - EQ - MAX - PRC - SPRC - 2VCA
>>
>> panel #3
>>
>> SEQ8 - DUAL ASR - ACPR - DTG - BLOG - SQP4
>>
>> I mean to get a TKB later, hence the QUAN for tkb.
>>
>> What do you think should be different in the new panel ?
>> I like to use my serge equally for processing external sources, noise
>> sculpture and regular synth stuff.
>>
>>
>> Kim
>>
>> http://www.antenne.suite.dk
>>
>> On May 30, 2007, at 11:41 PM, matthew carpenter wrote:
>>
>> > Haha, no no. Sorry, I hijacked this thread and now you're confusing
>> me
>> > with the other guy. I hope he doesn't feel left out! There's just so
>> > little time to decide!
>> >
>> > I have the three panel system I posted pics of and was looking at a
>> > panel that's comprised of a few things from the Soup Kitchen. My
>> > future plans were two custom panels with a mix of sequencing and
>> > effects but that ain't gonna happen, now.
>> >
>> > Do you, or any other list members have experience with the ext.
>> > carrier version of the Frequency Shifter? (Yep, I've read the entire
>> > history of this list and search the archives for comments on
>> specific
>> > modules from time to time)
>> >
>> > And, yeah, I did learn a thing or two from the rise and fall of the
>> > Fist, John, don't worry!
>> >
>> > I thought I'd take the liberty of making this THE 'final custom
>> panel'
>> > thread -- sorry!
>> >
>> > My current config, for anyone who wishes to comment:
>> >
>> > NTO / PCO / VCM / AMX (w/ phase switch) / SSG w/ noise / DTG (w/ sig
>> > ins) / VCFQ(X) / UAP
>> >
>> > BUFF / SCPR / ACPR / ADSR / ADSR / VCF2 / MIX2 / VCFQ(X) / EQ
>> >
>> > NTO / TWS / RING / NCOM / ACPR / 2RVG / DTG / VCFS / 2PHA
>> >
>> > I will certainly add a sequencer and/or TKB in the future so this
>> last
>> > custom panel is meant to cover some territory I don't have covered,
>> > already:
>> >
>> > PRNV / CM / FRS(X) / QUO(?) / XFAD / WAD / BUFF / AMX / VCM / DCSM
>> >
>> > I already have a VCM so I'm not sure about that one. But you can't
>> get
>> > one anywhere else and I'd hate to buy a Soup Kitchen just for a VCM.
>> > Anyway, that's my idea. Looks like a Soup Kitchen but I already have
>> > a 2PHA and I'm thinking of going for the ext. carrier version of the
>> > Frequency Shifter, which it doesn't seem like either of the SK's
>> use.
>> > So, the VCM and QUO spots are up for grabs, pretty much, and IMO,
>> you
>> > can't have enough scaling buffers or mixers.
>> >
>> >
>> >
>> >
>> > On 5/30/07, darkstr1746@... <darkstr1746@... >
>> > wrote:So it looks like your going to have two FRS and two WADs???
>> > sonic damage abounds!! hahaha. With that set up, i personally don't
>> > see any benifit by adding the BUFF and STR. But that's just my
>> opinion
>> > based on how i used that configuration. Others who are more
>> > knowledgable with that module might shed some light. Not sure about
>> > the NCOM in conjunction with that panel but it might fit in with the
>> > othe panels better. One thing i learned from hard experience was
>> that
>> > when at all possible you should stick with "like functioning"
>> modules
>> > in one panel. I made several panels that when used with my system as
>> > it was then were quite functional and made sense but when looked at
>> as
>> > "stand alones" were a complete train wreck and exceedingly hard to
>> > sell later on. Just a word of wisdom.
>> >> So choose wisely Grasshoppa : )
>> >> kind regards
>> >>
>> >> jduval
>> >>
>> >>> -------------- Original message --------------
>> >>> From: "matthew carpenter" <matfhew.carpenfer@ gmail.com>
>> >>>
>> >>> Right, John, thank you.
>> >>>
>> >>> Here's the layout I'm considering for a complement to my other
>> three:
>> >>>
>> >>> PRNV / FRS(X) / CM / XFAD / QUO / WAD / BUFF / AMX / NCOM / STR /
>> >>> DCSM
>> >>>
>> >>> I may change the sequence. Only shop panels I can foresee picking
>> >>> up in the future would be the Sequencer panel and a TKB. So, the
>> >>> panel above is in keeping with those plans so I don't
>> unnecessarily
>> >>> duplicate something.
>> >>>
>> >>> Is it correct to assume that a QUO is a good addition to the FRS
>> >>> with external carrier since it doesn't have a QUO on board like
>> the
>> >>> non-ext. carrier version?
>> >>>
>> >>>
>> >>> On 5/30/07, darkstr1746@... < darkstr1746@... >
>> >>> wrote: All Freq Shift modules are 3" the extra space being taken
>> up
>> >>> by the CM. Rex will tell you that he doesn't do single modules.
>> That
>> >>> horse has been beat to death for years. The shop panels
>> >>> configuration is set.Anything else is custom and will probably
>> stay
>> >>> that way.
>> >>>> The only way for everyone to get a handle on this is to make the
>> >>>> phone call. Check out his head space and see what the deal is on
>> an
>> >>>> individual basis.
>> >>>> jduval
>> >>>>
>> >>>>> -------------- Original message --------------
>> >>>>> From: "matthew carpenter" < matfhew.carpenfer@ gmail.com>
>> >>>>>
>> >>>>>
>> >>>>> How many inches does each version of the Frequency Shifter take?
>> >>>>> The table says 3 but the pictures of the panels show 2.
>> >>>>>
>> >>>>> On 5/30/07, matthew carpenter < matfhew.carpenfer@...>
>> >>>>> wrote: I use the Active Processor all the time for audio. I'll
>> let
>> >>>>> you know if it'll do a jump cut.
>> >>>>>>
>> >>>>>> Yes, I'd like to place a last minute order, too. Such short
>> >>>>>> notice!
>> >>>>>>
>> >>>>>> Right, that was my point about getting a panel with certain
>> >>>>>> modules that we won't see on the shop panels... Or will we? All
>> >>>>>> of this raises more questions such as: Will there be new shop
>> >>>>>> panels with different configurations? Is Rex going to do
>> >>>>>> individual modules? Answers to these questions may be more
>> >>>>>> forthcoming by phone but they would certainly help me make my
>> >>>>>> decision more easily.
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> On 5/30/07, riluttante < riluttante@... > wrote: --- In
>> >>>>>> SergeModular@yahoogroups.com, "matthew carpenter"
>> >>>>>> <matfhew.carpenfer @...>
>> >>>>>>> wrote:
>> >>>>>>> >
>> >>>>>>> > Yeah, I like the Triple Waveshaper and Wave Multipliers,
>> too.
>> >>>>>>> The EQ is
>> >>>>>>> > brilliant, and the VCF2, I've yet to form a more solid
>> opinion
>> >>>>>>> on, and I
>> >>>>>>> > have two Active Processors which I use all the time. The
>> NCOM
>> >>>>>>> is great, too,
>> >>>>>>>
>> >>>>>>> Can you get the Active Processors to make a real hard
>> jump-cut,
>> >>>>>>> with no audible "fade"
>> >>>>>>> between the signals, when used with audio?
>> >>>>>>> Or does nobody use the AP with audio?
>> >>>>>>>
>> >>>>>>> > so many uses, and Rex called it a rock crusher, once. I'll
>> be
>> >>>>>>> getting
>> >>>>>>> > another, and most of the lefthand side of a Soup Kitchen.
>> >>>>>>>
>> >>>>>>> So you're placing a last-minute custom order too?
>> >>>>>>>
>> >>>>>>> > But, should any of us consider a module that we wouldn 't be
>> >>>>>>> able to get on a
>> >>>>>>> > shop panel, or in a practical combination with o ther
>> modules?
>> >>>>>>> How about a
>> >>>>>>> > Matrix Mixer, for example? A Dual Schmitt Trigger? Does
>> anyone
>> >>>>>>> have either?
>> >>>>>>>
>> >>>>>>> Yeah, I guess those are history, at least in the way we know
>> >>>>>>> them. I don't have a particular
>> >>>>>>> need for either of those modules, I think, but you're right in
>> >>>>>>> that if you'd want to own one,
>> >>>>>>> you'd need to put a panel together right now. There's no way
>> I'm
>> >>>>>>> ordering another
>> >>>>>>> complete Soup Kitchen, but I really want another Wave
>> Multiplier
>> >>>>>>> and EQ.
>> >>>>>>>
>> >>>>>
>> >>>
>> >>
>> >
>> >
>> >
>
>