Hi,
The Serge gear I'm familiar with from the early '80s used only skinny
knobs (approx 12mm diameter, 1/8" shafts) which appear to be the
Davies 1900-H. I've seen them listed at Allied (alliedelec.com) as
recently as this summer. $2.42 in small quantity. Earlier panels also
used some larger knobs. As far as I know, the Davies knobs (or
something just like them) are still used.
Steve
The Serge gear I'm familiar with from the early '80s used only skinny
knobs (approx 12mm diameter, 1/8" shafts) which appear to be the
Davies 1900-H. I've seen them listed at Allied (alliedelec.com) as
recently as this summer. $2.42 in small quantity. Earlier panels also
used some larger knobs. As far as I know, the Davies knobs (or
something just like them) are still used.
Steve
--- In SergeModular@yahoogroups.com, "Ken Stone" <sasami@...> wrote:
>
> No idea on either, sorry. When I make my panels, I use a laser
> printer and paper, so my designs are in photoshop. As for the knobs,
> the larger knobs (1/4" shaft) appear to be Marshall amp knobs, while
> the smaller ones (1/8" shaft) I have never seen anywhere else. Most
> likely something Serge was able to get surplus, as a lot of what was
> used in the paper face synths appears to have been.
>
> Ken
>
> --- In SergeModular@yahoogroups.com, "fhserge" <Frank.Hettlich@>
> wrote:
> >
> > Hi Ken,
> >
> > do you know if there are any .fpd for Serge alike CGS modules
> available?
> >
> > And maybe you know what kind of knobs were used on the paper faced
> > Serge panels? I know you own a quite large paper faced Serge system.
> >
> > Frank
>