SergeModular

Hi Steve,

thanks for your hint! As far as I know the beautiful looking Davies
knobs you mention are used by several synth makers like Serge, Modcan
A, Wiard etc and they do actually fit on the larger shafts but not on
the (quite unusual, very thin!) 1/8" shafts. I think I will have to
google for the right ones.

Frank

--- In SergeModular@yahoogroups.com, "evetsterueb" <synth@...> wrote:
>
> Hi,
>
> The Serge gear I'm familiar with from the early '80s used only
skinny
> knobs (approx 12mm diameter, 1/8" shafts) which appear to be the
> Davies 1900-H. I've seen them listed at Allied (alliedelec.com) as
> recently as this summer. $2.42 in small quantity. Earlier panels
also
> used some larger knobs. As far as I know, the Davies knobs (or
> something just like them) are still used.
>
> Steve
>
> --- In SergeModular@yahoogroups.com, "Ken Stone" <sasami@> wrote:
> >
> > No idea on either, sorry. When I make my panels, I use a laser
> > printer and paper, so my designs are in photoshop. As for the
knobs,
> > the larger knobs (1/4" shaft) appear to be Marshall amp knobs,
while
> > the smaller ones (1/8" shaft) I have never seen anywhere else.
Most
> > likely something Serge was able to get surplus, as a lot of what
was
> > used in the paper face synths appears to have been.
> >
> > Ken
> >
> > --- In SergeModular@yahoogroups.com, "fhserge" <Frank.Hettlich@>
> > wrote:
> > >
> > > Hi Ken,
> > >
> > > do you know if there are any .fpd for Serge alike CGS modules
> > available?
> > >
> > > And maybe you know what kind of knobs were used on the paper
faced
> > > Serge panels? I know you own a quite large paper faced Serge
system.
> > >
> > > Frank
> >
>