Thanks a lot guys, you are GREAT! The shaft hole adapter thing might
be the route I will go if I cannot find suitable 1/8 shaft knobs.
Btw: If I already "go shopping" what are the standard power
connectors that connect to the PSx distribution board (brand,
manufacturer etc).
They are near to unknown here in Europe.
My technician replaced the original connectors (and probably throw
them away...) as I used a different power system for some time.
Now I want to revert back to the original Serge power distribution
system but the trash with the connectors has been emptied long ago ...
Frank
be the route I will go if I cannot find suitable 1/8 shaft knobs.
Btw: If I already "go shopping" what are the standard power
connectors that connect to the PSx distribution board (brand,
manufacturer etc).
They are near to unknown here in Europe.
My technician replaced the original connectors (and probably throw
them away...) as I used a different power system for some time.
Now I want to revert back to the original Serge power distribution
system but the trash with the connectors has been emptied long ago ...
Frank
--- In SergeModular@yahoogroups.com, bbob <fluxmonk@...> wrote:
>
> Mouser has a "shaft hole adapter" (part #506-KR1), which slips
inside a 1/4"
> knob and allows you to mount it on 1/8" shafts... very handy.
>
> bbob
> www.fluxmonkey.com
>
> On Jan 28, 2008 8:02 AM, Steve Ridley <spr@...> wrote:
>
> >
> >
> > > thanks for your hint! As far as I know the beautiful looking
Davies
> > > knobs you mention are used by several synth makers like Serge,
Modcan
> > > A, Wiard etc and they do actually fit on the larger shafts but
not on
> > > the (quite unusual, very thin!) 1/8" shafts.
> >
> > If you realy want to go for the Davies 1900 knobs, they are (or
were)
> > available for 1/8" shafts.
> >
> >
> > http://www.daviesmolding.com/standard-products/plastic-
knobs/instrument-knobs/default.html
> >
> > Actually finding any in this size might be very difficult.
> >
> > Steve
> >
> >
> >
>