Good Morning Bakis,
One M-boat has a power requirement that is equivalelent to a
STS/Serge panel (Shop series or Custom).
What you have, Bakis, is a [PS12] as denoted by the four 5-pin "XLR"
connectors. --(The [PS6] has two)
Your [PS12] implied by the designator, up to 12 panels. So you will
have plenty of room to grow your STS/Serge.
Please note that AC line Voltages in Europe/U.K. (& the lower half
of Japan) all have 50 Hz as the standard. This derates power supplies
Dc outputs by approx 15%.
What you need to connect your "M-boat to the [PSD], running off the
[PS12], is a [PBX] "Power Braid Extender" cable (18" long) OR a
[PBXL] "Power Braid Extender Long" same except (24" in length).
Both length extenders are Male MOLEX on one and Female MOLEX (4-pin)
on the other end.
These are hand braided and $ 20 / $ 25 each, respectively.
No [PS2a] is required given your configuration.
Best,
Harry Tique
STS
One M-boat has a power requirement that is equivalelent to a
STS/Serge panel (Shop series or Custom).
What you have, Bakis, is a [PS12] as denoted by the four 5-pin "XLR"
connectors. --(The [PS6] has two)
Your [PS12] implied by the designator, up to 12 panels. So you will
have plenty of room to grow your STS/Serge.
Please note that AC line Voltages in Europe/U.K. (& the lower half
of Japan) all have 50 Hz as the standard. This derates power supplies
Dc outputs by approx 15%.
What you need to connect your "M-boat to the [PSD], running off the
[PS12], is a [PBX] "Power Braid Extender" cable (18" long) OR a
[PBXL] "Power Braid Extender Long" same except (24" in length).
Both length extenders are Male MOLEX on one and Female MOLEX (4-pin)
on the other end.
These are hand braided and $ 20 / $ 25 each, respectively.
No [PS2a] is required given your configuration.
Best,
Harry Tique
STS