Can you explain this? The 1/8 clock pulse still goes to the ACPR or XFAD VC IN? If you can, try it on your system...
I remember the original post about chaining two rows of the 4 Stage SQP together using the / 8 output of the PDIV. The original poster was surprised that this would be the case but it works. For chaining two rows of the 8x2, the / 8 output causes the sequence to switch half-way, i.e., after 4 steps, not 8.
I remember the original post about chaining two rows of the 4 Stage SQP together using the / 8 output of the PDIV. The original poster was surprised that this would be the case but it works. For chaining two rows of the 8x2, the / 8 output causes the sequence to switch half-way, i.e., after 4 steps, not 8.
On 3/14/08, Bakis Sirros <synth_freak_2000@...> wrote:...just mult and divide by 8 (via the pulse divider
module) the clocking pulse that will clock the 2x18
sequencer...
and you got your gate out at 1/8 of the clock speed.__________________________________________________________
--- kkonkkrete <kkonkkrete@...> wrote:
>
> OK, this is a bit of a guess as I don't actually own
> one, but here is
> a workaround I think should work:
>
> - route A and B outs to the two ins of a VC X-fader
> - apply a square wave at 1/8 the freq of the main
> clock to the VC In
> of the X-fader.
> - The out of the X-fader will alternate between 1
> cycle of A and 1
> cycle of B.
>
> Now the question is how to get a square wave at 1/8
> clock speed. Seems
> you should be able to do this with a PDIV and an S&H
> unit.
>
> Pure speculation until I get my system, of course
> ...
>
> Kinkrot
>
>
> --- In SergeModular@yahoogroups.com, "matthew
> carpenter"
> <matfhew.carpenfer@...> wrote:
> >
> > Hi,
> >
> > I know how to make an 8 step sequence with the 4
> Stage Sequencer
> Programmer
> > [SQP] using an Active Processor [ACPR] and the
> Pulse Divider [PDIV]
> but I'd
> > like to know if anyone's discovered a way of
> chaining the two rows
> of the
> > 8x2 Sequencer [SEQ] to make a single 16-step
> sequence.
> >
> > Since the [SEQ] doesn't have GATE OUTPUTs, I'm
> trying various patches
> > incorporating the Schmitt Triggers [STR] but it's
> not quite happening.
> >
> > Thanks!
> > Matt
> >
>
>
>
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping