SergeModular

yes, you are probably right.
i still do not have a serge pulse divider to be sure
really.
i will have one soon though... and i do not have an
Xfad serge module yet, (soon i'll have this too)
so, i cannot try the patch...


--- matthew carpenter <matfhew.carpenfer@...>
wrote:

> Can you explain this? The 1/8 clock pulse still goes
> to the ACPR or XFAD VC
> IN? If you can, try it on your system...
> I remember the original post about chaining two rows
> of the 4 Stage SQP
> together using the / 8 output of the PDIV. The
> original poster was surprised
> that this would be the case but it works. For
> chaining two rows of the 8x2,
> the / 8 output causes the sequence to switch
> half-way, i.e., after 4 steps,
> not 8.
>
> On 3/14/08, Bakis Sirros
> <synth_freak_2000@...> wrote:
> >
> > ...just mult and divide by 8 (via the pulse
> divider
> > module) the clocking pulse that will clock the
> 2x18
> > sequencer...
> > and you got your gate out at 1/8 of the clock
> speed.
> >
> >
> > --- kkonkkrete <kkonkkrete@...
> <kkonkkrete%40yahoo.co.uk>> wrote:
> >
> > >
> > > OK, this is a bit of a guess as I don't actually
> own
> > > one, but here is
> > > a workaround I think should work:
> > >
> > > - route A and B outs to the two ins of a VC
> X-fader
> > > - apply a square wave at 1/8 the freq of the
> main
> > > clock to the VC In
> > > of the X-fader.
> > > - The out of the X-fader will alternate between
> 1
> > > cycle of A and 1
> > > cycle of B.
> > >
> > > Now the question is how to get a square wave at
> 1/8
> > > clock speed. Seems
> > > you should be able to do this with a PDIV and an
> S&H
> > > unit.
> > >
> > > Pure speculation until I get my system, of
> course
> > > ...
> > >
> > > Kinkrot
> > >
> > >
> > > --- In SergeModular@yahoogroups.com
> <SergeModular%40yahoogroups.com>,
> > "matthew
> > > carpenter"
> > > <matfhew.carpenfer@...> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I know how to make an 8 step sequence with the
> 4
> > > Stage Sequencer
> > > Programmer
> > > > [SQP] using an Active Processor [ACPR] and the
> > > Pulse Divider [PDIV]
> > > but I'd
> > > > like to know if anyone's discovered a way of
> > > chaining the two rows
> > > of the
> > > > 8x2 Sequencer [SEQ] to make a single 16-step
> > > sequence.
> > > >
> > > > Since the [SEQ] doesn't have GATE OUTPUTs, I'm
> > > trying various patches
> > > > incorporating the Schmitt Triggers [STR] but
> it's
> > > not quite happening.
> > > >
> > > > Thanks!
> > > > Matt
> > > >
> > >
> > >
> > >
> >
> >
>

__________________________________________________________

> > Looking for last minute shopping deals?
> > Find them fast with Yahoo! Search.
> >
>

http://tools.search.yahoo.com/newsearch/category.php?category=shopping

> >
> >
> >
>

____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping