SergeModular

I guess I am looking for a sequential switch type of device then or a
clocked switch then.

but curious what combinations of modules will give me that switching
functionality with the ACPR even if its a 5volt constant input instead
of pulse, any ideas to generate that 5 volt constant output as the
sequencer is in its second row?

C.

--- In SergeModular@yahoogroups.com, Bakis Sirros
<synth_freak_2000@...> wrote:

>
> some vc-switches need an X volts voltage to switch between the two

inputs (staying at input 2 as long as the voltage is X volts high) and
not a trigger to go from input 1 to input 2.

>
> if a switch needs a trigger to switch between its inputs then it

would be a clocked switch.

>
>
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> [Doepfer_a100] group owner
> www. parallel - worlds - music. com
> www. myspace. com/ parallelworldsmusic
> www. myspace. com/ interconnectedmusic
> www. myspace. com/ memorygeist
> www. DiN. org. uk
> www. musicamaximamagnetica. com
> www. shimarecords. co. uk
> www. rubberrecords. gr
> Athens - Greece
>
> --- On Wed, 12/17/08, Carlos <bushwick@...> wrote:
>
> From: Carlos <bushwick@...>
> Subject: [SergeModular] Re: patching VC switch? (combining sequencer

rows to get more steps)

> To: SergeModular@yahoogroups.com
> Date: Wednesday, December 17, 2008, 9:37 PM
>
>
>
>
>
>
> how would you patch the ACPR so that it will automatically switch to
> the other input at the end of a number of stages? would need a
> constant 5 volt input to do that no? a switch just needs a pulse to
> change inputs?
>
> --- In SergeModular@ yahoogroups. com, Bakis Sirros
> <synth_freak_ 2000@> wrote:
> >
> > you can make a vc-switch (2 in - 1 out) with an ACPR.
> >
> > btw, any other ideas how to make a vc-switch with Serge modules?
> >
> > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> > [Doepfer_a100] group owner
> > www. parallel - worlds - music. com
> > www. myspace. com/ parallelworldsmusic
> > www. myspace. com/ interconnectedmusic
> > www. myspace. com/ memorygeist
> > www. DiN. org. uk
> > www. musicamaximamagneti ca. com
> > www. shimarecords. co. uk
> > www. rubberrecords. gr
> > Athens - Greece
> >
> > --- On Wed, 12/17/08, Carlos <bushwick@ .> wrote:
> >
> > From: Carlos <bushwick@ .>
> > Subject: [SergeModular] patching VC switch? (combining sequencer
> rows to get more steps)
> > To: SergeModular@ yahoogroups. com
> > Date: Wednesday, December 17, 2008, 7:57 PM
> >
> >
> >
> >
> >
> >
> >
> > Is there a way to patch a VC switch in the current m-class or with
> the
> > regular panels?
> >
> > my thinking is that if I had a VC switch in combination with a

pulse

> > divider I could send values from the sequencer or sequencer
> programmer
> > and extend the number of steps by combining rows together. (using
> the
> > clock into the pulse divider to figure out when is time to change
> each
> > row being input into the switch)
> >
> > of course if there is an easier method of doing this I will like

to

> > hear it.
> >
> > C.
> >
>