SergeModular

ok

seems the TKB can go with them...
is less power hungry than the SoupK

question:
where in Europe can I buy the molex connectors male female, and pins, like the serge ones?

(I'd like to change my CGS panels to the same power input style)

thanks
Ant

--- In SergeModular@yahoogroups.com, Bakis Sirros <synth_freak_2000@...> wrote:
>
> from my experience, when not both leds (+12 and -12 volts) light (as they should!), its an indication that you need more power.
>
> buy a second serge PSU. that's what i did when i had that problem.
>
>
> thanks,
> best regards,
> Â
>
> Bakis
>
>
> ________________________________
> From: BooleanYulian <a.b@...>
> To: SergeModular@yahoogroups.com
> Sent: Saturday, April 6, 2013 12:55 AM
> Subject: Re: [SergeModular] Animal Panel power cables
>
>
> Â
> Hello Antonio
>
> 2 power cables: this is normal. some panels (espacially those wtih NTO, PCO, FS & QUO) require more power.. hence it has two identical power molex connectors.. the Red Voice has the same thing. Both need to be connected to the PSD to power the panel.
>
> the 2 LEDs: are +12v and -12v indicators
>
> imho, the fact that one light goes off when both Animal and SKitchen are connected indicates that the PS2 does not provide enough juice.. the FS on the SKitchen sucks up A LOT of juice.. so do the NTO/PCO on the Animal... these are amongst the power hungriest panels out there.. i think you'd need a PS4 to drive those two.. TKB may be Ok there too (w. PS4) as it's not very hungry..
>
> .. have you tried connecting the Animal to the PS2A direct and SKitchen and TKB to the PS2 via PSD?
>
> .. in my setup, one of my panels has a Klangzeit (w. FS and WAD) and a dual VCFQ (not so hungry).. and I have a PS2A dedicated to drive just that panel.. matter of fact, my 8 panel system needs to be driven by a PS6, PS4 and PS2AÂ
>
> hope this helps
> Yulian
>
> On 2013-04-05, at 3:35 PM, Antonio wrote:
>
> Â
> >Hello Friends
> >
> >I've bought a Serge Animal panel
> >with PS2 (I guess is PS2!) (it's a gray one...)
> >
> >my Animal has 2 power cables: is it normal ?
> >
> >and to work correctly both must be connected to the PSD
> >
> >on the PSD there are an Amber LED and a Green LED
> >
> >If I try to attach to the same PSD a Soup Kitchen the amber led goes down
> >and The Animal stop working...
> >
> >(for the Soup kitchen I have a PS2A (smaller!) )
> >
> >but I wanted to attach to the same PSUs also my TKB! (currently working on a third PSU (non serge)
> >is it everything NORMAL with my setup !?
> >
> >thank you
> >Antonio
> >
> >
>