SergeModular

does anyone here interface their Serge and Doepfer systems together?
I assume you'd just have to connect the supply grounds together and
use a banana to mini converter panel.. are the voltages compatable?
I don't have schemos or much experience with either system.

opinions? suggestions? tips?

thanks

I've done a bit of this, with no particular problems.
The steps you list should suffice at least to get going.
You might run in to issues with +5 versus +10 volt trigger or gate levels, possible dc offsets or shifts to waveforms, etc., but nothing that a Dual Processor and/or attenuator can't handle. Can't think of anything I've wanted to do that was intractable.
I actually cannibalized a bunch of 1/8" and banana cables to hybridize them -- now I've got a set of cables that are banana at one end and 1/8" at the other. Works great!

cheers,
Bill
Madison, WI

In a message dated 11/1/2007 7:59:14 AM Pacific Standard Time, echo7even@... writes:

does anyone here interface their Serge and Doepfer systems together?
I assume you'd just have to connect the supply grounds together and
use a banana to mini converter panel.. are the voltages compatable?
I don't have schemos or much experience with either system.

hello -

i use doepfer and serge together.

serge ground goes to my i/o panel and away we go - voltage levels are mostly compatible, too.

best,

dave