what would you like to see in future Serge modules?
2008-10-09 by cray5656
I would love
headphones out
Low Pass Gate
headphones out
Low Pass Gate
Thread
what would you like to see in future Serge modules?
Re: what would you like to see in future Serge modules?
2008-10-09 by matthew carpenter
Hey Ross,
The XFAD 1/4" output on the new M-odules, the 1/4" output on the UAP and the 1/4" output on the DCSM are all capable of driving a pair of headphones just fine. I have used them with a variety of different headphones when I didn't feel like powering up my computer/audio interface.
Also, the DTG/DSG can be used as a LPG but you won't get the ringing you would from vactrol leakage like in the Plan B Model 13.
I would like to see something like the old Triple Bi-directional Router and Peak & Trough modules.
The XFAD 1/4" output on the new M-odules, the 1/4" output on the UAP and the 1/4" output on the DCSM are all capable of driving a pair of headphones just fine. I have used them with a variety of different headphones when I didn't feel like powering up my computer/audio interface.
Also, the DTG/DSG can be used as a LPG but you won't get the ringing you would from vactrol leakage like in the Plan B Model 13.
I would like to see something like the old Triple Bi-directional Router and Peak & Trough modules.
Show quoted textHide quoted text
On 10/9/08, cray5656 <amni56@...> wrote:I would love
headphones out
Low Pass Gate
Re: what would you like to see in future Serge modules?
2008-10-09 by amnesia
Hi Mathew
it might be because I am tired but the UAP has 2 x1/4" outs. Are you
plugging the headphones into just one out or are you using 2 outs to a
stereo converter..for the life of me i cant mentally picture this i
guess I should sleep and it will be simple in the morning
Yes I like that Plan B LPG ring.....does the Serge have vactrols in the
DTG/DSG?
it might be because I am tired but the UAP has 2 x1/4" outs. Are you
plugging the headphones into just one out or are you using 2 outs to a
stereo converter..for the life of me i cant mentally picture this i
guess I should sleep and it will be simple in the morning
Yes I like that Plan B LPG ring.....does the Serge have vactrols in the
DTG/DSG?
Show quoted textHide quoted text
>
>
Re: what would you like to see in future Serge modules?
2008-10-09 by Bakis Sirros
totally agree with Matt about the 'triple bi-directional router' module and the 'peak and trough'.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagnetica. com
www. shimarecords. co. uk
www. rubberrecords. gr
Athens - Greece
--- On Thu, 10/9/08, matthew carpenter <matfhew.carpenfer@...> wrote:
From: matthew carpenter <matfhew.carpenfer@...>
Subject: Re: [SergeModular] what would you like to see in future Serge modules?
To: SergeModular@yahoogroups.com
Date: Thursday, October 9, 2008, 2:42 PM
Hey Ross,
The XFAD 1/4" output on the new M-odules, the 1/4" output on the UAP and the 1/4" output on the DCSM are all capable of driving a pair of headphones just fine. I have used them with a variety of different headphones when I didn't feel like powering up my computer/audio interface.
Also, the DTG/DSG can be used as a LPG but you won't get the ringing you would from vactrol leakage like in the Plan B Model 13.
I would like to see something like the old Triple Bi-directional Router and Peak & Trough modules.
On 10/9/08, cray5656 <amni56@.... au> wrote:I would love
headphones out
Low Pass Gate
Re: what would you like to see in future Serge modules?
2008-10-09 by matthew carpenter
Hi Ross,
I think what I do is set the UAP switch to PAN mode and then plug the headphone jack into the left output. I could be completely wrong, now that you mention it. I haven't done it in awhile. Can somebody else confirm? I might've used a 2 outs to stereo converter...
No, as far as I know, it does not contain vactrols. The Dual Phase Shifter does, though! And probably some other modules...
I think what I do is set the UAP switch to PAN mode and then plug the headphone jack into the left output. I could be completely wrong, now that you mention it. I haven't done it in awhile. Can somebody else confirm? I might've used a 2 outs to stereo converter...
No, as far as I know, it does not contain vactrols. The Dual Phase Shifter does, though! And probably some other modules...
Show quoted textHide quoted text
On 10/9/08, amnesia <amni56@...> wrote:Hi Mathew
it might be because I am tired but the UAP has 2 x1/4" outs. Are you
plugging the headphones into just one out or are you using 2 outs to a
stereo converter..for the life of me i cant mentally picture this i
guess I should sleep and it will be simple in the morning
Yes I like that Plan B LPG ring.....does the Serge have vactrols in the
DTG/DSG?
>
>
Re: what would you like to see in future Serge modules?
2008-10-09 by John P
I don't think these modules were intended to drive anything other than a
high impedance line level input.
I'd recommend a separate outboard headphone driver.
matthew carpenter wrote:
high impedance line level input.
I'd recommend a separate outboard headphone driver.
matthew carpenter wrote:
Show quoted textHide quoted text
>
> Hey Ross,
> The XFAD 1/4" output on the new M-odules, the 1/4" output on the UAP
> and the 1/4" output on the DCSM are all capable of driving a pair of
> headphones just fine. I have used them with a variety of different
> headphones when I didn't feel like powering up my computer/audio
> interface.
> Also, the DTG/DSG can be used as a LPG but you won't get the ringing
> you would from vactrol leakage like in the Plan B Model 13.
>
Re: what would you like to see in future Serge modules?
2008-10-09 by Dennis Verschoor
I would love to see
A quantizer module with lots of scales witch are selectable over cv or triggers/gates
A quantizer module with lots of scales witch are selectable over cv or triggers/gates
Show quoted textHide quoted text
On Thu, Oct 9, 2008 at 12:48 PM, cray5656 <amni56@...> wrote:
I would love
headphones out
Low Pass Gate
--
Music at: http://mono-poly.blogspot.com/
Re: what would you like to see in future Serge modules?
2008-10-09 by John P
A followup: Chip Puller just set the record straight. Yes, these VCA
based modules
can drive a pair of headphones without worry!
John P wrote:
based modules
can drive a pair of headphones without worry!
John P wrote:
Show quoted textHide quoted text
>
> I don't think these modules were intended to drive anything other than a
> high impedance line level input.
> I'd recommend a separate outboard headphone driver.
>
> matthew carpenter wrote:
> >
> > Hey Ross,
> > The XFAD 1/4" output on the new M-odules, the 1/4" output on the UAP
> > and the 1/4" output on the DCSM are all capable of driving a pair of
> > headphones just fine. I have used them with a variety of different
> > headphones when I didn't feel like powering up my computer/audio
> > interface.
> > Also, the DTG/DSG can be used as a LPG but you won't get the ringing
> > you would from vactrol leakage like in the Plan B Model 13.
> >
>
>
Re: what would you like to see in future Serge modules?
2008-10-09 by Matt Carpenter
A little more info on this.
I've confirmed that in the case of the those modules with paired
outputs, i.e., UAP, DCSM, or QVM, you can use a 'Y-connector' that
goes from two mono 1/4" phone plugs to a 'stereo' TRS 1/4" jack.
In the case of the XFAD, Chip says Switchcraft makes a barrel adaptor
that goes from 1/4" TS mono phone plug to TRS stereo jack. The part
number for this is: #352A
Either of these solutions will give you what you're looking for!
I've confirmed that in the case of the those modules with paired
outputs, i.e., UAP, DCSM, or QVM, you can use a 'Y-connector' that
goes from two mono 1/4" phone plugs to a 'stereo' TRS 1/4" jack.
In the case of the XFAD, Chip says Switchcraft makes a barrel adaptor
that goes from 1/4" TS mono phone plug to TRS stereo jack. The part
number for this is: #352A
Either of these solutions will give you what you're looking for!
Show quoted textHide quoted text
--- In SergeModular@yahoogroups.com, John P <johnp299792@...> wrote:
>
> A followup: Chip Puller just set the record straight. Yes, these VCA
> based modules
> can drive a pair of headphones without worry!
>
Re: what would you like to see in future Serge modules?
2008-10-09 by darkstr1746@comcast.net
Dennis is right on with the Quantizer suggestion.
I would add the Dual ASR with "attenuation" pots. One of the truly
overlooked and wonderful modules to ever grace the system
kind regards
jd
Show quoted textHide quoted text
-------------- Original message --------------
From: "Dennis Verschoor" <modular@...>
I would love to see
A quantizer module with lots of scales witch are selectable over cv or triggers/gates
On Thu, Oct 9, 2008 at 12:48 PM, cray5656 <amni56@.... au> wrote:
I would love
headphones out
Low Pass Gate
--
Music at: http://mono- poly.blogspot. com/
Re: what would you like to see in future Serge modules?
2008-10-09 by Bill Sequeira
Think I would want "tactile" control other than knobs.
Maybe a large capacitance-based touchpad (3"x 3") with 3 or 4 degrees of freedom (X, Y, pressure=Z, maybe two fingers = W) with scaling functions on the side and (this is wishful thinking) the ability to capture a control voltage for x secs with a manual trigger to release.
Cheers -- Bill
__________________________________________
Bill Sequeira, PHD
On Oct 9, 2008, at 1:04 PM, darkstr1746@... wrote:
Dennis is right on with the Quantizer suggestion.I would add the Dual ASR with "attenuation" pots. One of the trulyoverlooked and wonderful modules to ever grace the systemkind regardsjd-------------- Original message --------------
From: "Dennis Verschoor" <modular@...>
I would love to see
A quantizer module with lots of scales witch are selectable over cv or triggers/gates
On Thu, Oct 9, 2008 at 12:48 PM, cray5656 <amni56@.... au> wrote:
I would love
headphones out
Low Pass Gate
--
Music at: http://mono- poly.blogspot. com/
Re: what would you like to see in future Serge modules?
2008-10-10 by John P
I would like to see an oscillator with lots of sync options. Variable
sync, modulated sync, clamping... for both audio and CV domains. Way
back when, Aries put out something called the PMS VCO. No, it has
nothing to do with hormones or Midol, but Phase Modulated Sync.
Modulate the Sync (waveform restart) point with a CV. I know, the
honorable Mr Puller's going to frown and grind his teeth, but one can
dream all one wants to.
In that vein, I've never played with the Zeroscillator. I've never
heard any demos that made me think it was anything special. But in
theory, it would seem to be a hot ticket. Anybody care to comment?
sync, modulated sync, clamping... for both audio and CV domains. Way
back when, Aries put out something called the PMS VCO. No, it has
nothing to do with hormones or Midol, but Phase Modulated Sync.
Modulate the Sync (waveform restart) point with a CV. I know, the
honorable Mr Puller's going to frown and grind his teeth, but one can
dream all one wants to.
In that vein, I've never played with the Zeroscillator. I've never
heard any demos that made me think it was anything special. But in
theory, it would seem to be a hot ticket. Anybody care to comment?
Re: what would you like to see in future Serge modules?
2008-10-10 by Bakis Sirros
i really like the ZO, for its linear fm sound. very nice sound! hence, i have two of them.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagnetica. com
www. shimarecords. co. uk
www. rubberrecords. gr
Athens - Greece
--- On Fri, 10/10/08, John P <johnp299792@...> wrote:
From: John P <johnp299792@...>
Subject: Re: [SergeModular] what would you like to see in future Serge modules?
To: SergeModular@yahoogroups.com
Date: Friday, October 10, 2008, 7:33 AM
I would like to see an oscillator with lots of sync options. Variable
sync, modulated sync, clamping... for both audio and CV domains. Way
back when, Aries put out something called the PMS VCO. No, it has
nothing to do with hormones or Midol, but Phase Modulated Sync.
Modulate the Sync (waveform restart) point with a CV. I know, the
honorable Mr Puller's going to frown and grind his teeth, but one can
dream all one wants to.
In that vein, I've never played with the Zeroscillator. I've never
heard any demos that made me think it was anything special. But in
theory, it would seem to be a hot ticket. Anybody care to comment?
Re: what would you like to see in future Serge modules?
2008-10-10 by Matt Carpenter
Richard Quirk, who used to be on this list, suggested the following
new M-odule. I have to agree, it would be a good one!
TGO / a new 'cell' consisting of 1 section of a Triple Waveshaper, the
middle section of the Wave Multiplier, Ring Mod / Precision Oscillator
/ VCA w/ 1/4" out.
new M-odule. I have to agree, it would be a good one!
TGO / a new 'cell' consisting of 1 section of a Triple Waveshaper, the
middle section of the Wave Multiplier, Ring Mod / Precision Oscillator
/ VCA w/ 1/4" out.
Re: what would you like to see in future Serge modules?
2008-10-11 by evetsterueb
If the output section were reduced to 1" wide an M series six input
SMX could be made.
If you don't remember the SMX, back in the day you could order Multi
Channel Stereo Mixers (SMX) in various widths. Each 2" wide increment
was two independent VCA's driving two channels, each VCA having its
own VC panner. The last 2" increment had a VC master gain and jacks
for stereo Aux in and stereo Mix out. One of my older panels has a 6
input SMX with a UAP next to it. The UAP can be used separately or
(with a switch) can feed the SMX aux inputs, providing a seventh
stereo input.
Recording stuff separately for later editing and mixing fine but
making the mix part of the patch is how I like to work. Don't know
what I'd do without the SMX. Is anything like it available today?
SMX could be made.
If you don't remember the SMX, back in the day you could order Multi
Channel Stereo Mixers (SMX) in various widths. Each 2" wide increment
was two independent VCA's driving two channels, each VCA having its
own VC panner. The last 2" increment had a VC master gain and jacks
for stereo Aux in and stereo Mix out. One of my older panels has a 6
input SMX with a UAP next to it. The UAP can be used separately or
(with a switch) can feed the SMX aux inputs, providing a seventh
stereo input.
Recording stuff separately for later editing and mixing fine but
making the mix part of the patch is how I like to work. Don't know
what I'd do without the SMX. Is anything like it available today?
Re: what would you like to see in future Serge modules?
2008-10-11 by Matt Carpenter
--- In SergeModular@yahoogroups.com, "evetsterueb" <synth@...> wrote:
Show quoted textHide quoted text
>Yes, same here. Great idea! And it would be the first M-odule on my
> If the output section were reduced to 1" wide an M series six input
> SMX could be made.
> Recording stuff separately for later editing and mixing fine but
> making the mix part of the patch is how I like to work.
>
list...