Vintage Simmons Drums (UK) Users Group

Or if you wanted to do it non-destructively, make up a short
female-to-male adapter with the resistor wired into that. 

--- In Simmons_Drums@yahoogroups.com, <michael.buchner@...> wrote:
>
> / To solve the problem I would suggest to solder a 10kohms resistor
between live and neutral in the SDSV consoles pad inputs. You could do
this in the pad or the cables too, but then these would not be useful
for anything else. / So solder a resistor to each XLR connecting the 2
pins, thats it.
> Michael

>   ----- Original Message ----- 
>   From: Jim 
>   To: Simmons_Drums@yahoogroups.com 
>   Sent: Monday, September 17, 2007 5:39 PM
>   Subject: [Simmons Drums] SDSV Crosstalk
> 
> 
>   Hello, 
> 
>   Recently purchased an SDSV module which I am using with SDS9 pads. I 
>   am having a problem with crosstalk. /