Thnks a lot Vince - it's a start at least. I'd rather receive good guesses than nothing at all! ;) electronically yours, jesper www.bolina.hsb.se/hsidor/jesper - -- --- ---- ----- ---- --- -- - electronic obsession mailorder http://obsession.svart.nu ----- Original Message ----- From: "Vince LeGrand" <vlegrand@...> To: <Simmons_Drums@yahoogroups.com> Sent: Wednesday, May 22, 2002 1:19 PM Subject: Re: [Simmons Drums] separate outs > I don't have an SDS V, but the following information is in my SDS 7 manual: > > Serial numbers 0 - 250 are wired: > Pin 1 and 2 Ground > Pin 3 Hot > > Serial numbers 250 and onwards (this is a quote...who knows exactly how serial number 250 is wired :-) > Pin 1 and 3 Ground > Pin 2 Hot > > So, my guess would be that the SDS V probably follows the same wiring configuration as the early SDS 7's. > > Just my 2 cents. > > Vince > ----- Original Message ----- > From: Jesper > To: Simmons_Drums@yahoogroups.com > Sent: Wednesday, May 22, 2002 5:55 AM > Subject: [Simmons Drums] separate outs > > > Hi dudes! > > I'm rigging for separate outs on my SDS-V - there is some weird posting about this on synthsite, but can anyone here tell me which is which, i e 1-2-3, hot-cold-ground, tip-ring-sleeve etc. > > Any help appreciated! > > electronically yours, jesper > > www.bolina.hsb.se/hsidor/jesper > - -- --- ---- ----- ---- --- -- - > electronic obsession mailorder > http://obsession.svart.nu > > > > > > Yahoo! Groups Sponsor > ADVERTISEMENT > > > > > To unsubscribe from this group, send an email to: > Simmons_Drums-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > [Non-text portions of this message have been removed] > > > > To unsubscribe from this group, send an email to: > Simmons_Drums-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
Message
Re: [Simmons Drums] separate outs
2002-05-22 by Jesper
Attachments
- No local attachments were found for this message.