Synth-DIY Yahoo! Groups Archives

Re: [Simmons Drums] separate outs

2002-05-22 by Vince LeGrand

I don't have an SDS V, but the following information is in my SDS 7 manual:

Serial numbers 0 - 250 are wired:
 Pin 1 and 2 Ground
 Pin 3 Hot

Serial numbers 250 and onwards (this is a quote...who knows exactly how serial number 250 is wired  :-)
 Pin 1 and 3 Ground
 Pin 2 Hot

So, my guess would be that the SDS V probably follows the same wiring configuration as the early SDS 7's.

Just my 2 cents.

Vince

Show quoted textHide quoted text

  ----- Original Message ----- 
  From: Jesper 
  To: Simmons_Drums@yahoogroups.com 
  Sent: Wednesday, May 22, 2002 5:55 AM
  Subject: [Simmons Drums] separate outs

  Hi dudes!

  I'm rigging for separate outs on my SDS-V - there is some weird posting about this on synthsite, but can anyone here tell me which is which, i e 1-2-3, hot-cold-ground, tip-ring-sleeve etc.

  Any help appreciated!

  electronically yours, jesper

  www.bolina.hsb.se/hsidor/jesper
  - -- --- ---- ----- ---- --- -- -
  electronic obsession mailorder
  http://obsession.svart.nu

        Yahoo! Groups Sponsor 
              ADVERTISEMENT

  To unsubscribe from this group, send an email to:
  Simmons_Drums-unsubscribe@yahoogroups.com

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 

[Non-text portions of this message have been removed]

Re: [Simmons Drums] separate outs

2002-05-22 by Jesper

Thnks a lot Vince - it's a start at least. I'd rather receive good guesses than nothing at all! ;)

electronically yours, jesper

www.bolina.hsb.se/hsidor/jesper
- -- --- ---- ----- ---- --- -- -
electronic obsession mailorder
http://obsession.svart.nu

   
----- Original Message -----

Show quoted textHide quoted text

From: "Vince LeGrand" <vlegrand@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Wednesday, May 22, 2002 1:19 PM
Subject: Re: [Simmons Drums] separate outs


> I don't have an SDS V, but the following information is in my SDS 7 manual:
> 
> Serial numbers 0 - 250 are wired:
>  Pin 1 and 2 Ground
>  Pin 3 Hot
> 
> Serial numbers 250 and onwards (this is a quote...who knows exactly how serial number 250 is wired  :-)
>  Pin 1 and 3 Ground
>  Pin 2 Hot
> 
> So, my guess would be that the SDS V probably follows the same wiring configuration as the early SDS 7's.
> 
> Just my 2 cents.
> 
> Vince
>   ----- Original Message ----- 
>   From: Jesper 
>   To: Simmons_Drums@yahoogroups.com 
>   Sent: Wednesday, May 22, 2002 5:55 AM
>   Subject: [Simmons Drums] separate outs
> 
> 
>   Hi dudes!
> 
>   I'm rigging for separate outs on my SDS-V - there is some weird posting about this on synthsite, but can anyone here tell me which is which, i e 1-2-3, hot-cold-ground, tip-ring-sleeve etc.
> 
>   Any help appreciated!
> 
>   electronically yours, jesper
> 
>   www.bolina.hsb.se/hsidor/jesper
>   - -- --- ---- ----- ---- --- -- -
>   electronic obsession mailorder
>   http://obsession.svart.nu
> 
>      
> 
> 
> 
>         Yahoo! Groups Sponsor 
>               ADVERTISEMENT
>              
>        
>        
> 
>   To unsubscribe from this group, send an email to:
>   Simmons_Drums-unsubscribe@yahoogroups.com
> 
> 
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> To unsubscribe from this group, send an email to:
> Simmons_Drums-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
>

Vintage Simmons Drums (UK) Users Group

Re: [Simmons Drums] separate outs

Re: [Simmons Drums] separate outs

Re: [Simmons Drums] separate outs

Move to quarantaine