SDS7 eproms
2011-09-19 by WT
What sounds was the SDS7 initially shipped with ? My SDS7 has software version 9 installed. If anyone needs it, I have copied it in my eprom-programmer and can send you a bin-file. WT
Thread
SDS7 eproms
Re: [Simmons Drums] SDS7 eproms
2011-09-19 by Michael Buchner
The initial sounds were: bass (8k), tight snare (8k), bright tom (16k), hihat (32k), crash cymbal(32k). Michael
Show quoted textHide quoted text
----- Original Message -----
From: WT
To: Simmons_Drums@yahoogroups.com
Sent: Monday, September 19, 2011 6:15 PM
Subject: [Simmons Drums] SDS7 eproms
What sounds was the SDS7 initially shipped with ?
My SDS7 has software version 9 installed. If anyone needs it, I have copied
it in my eprom-programmer and can send you a bin-file.
WT
[Non-text portions of this message have been removed]Re: [Simmons Drums] SDS7 eproms
2011-09-19 by WT
Cool, thanks ! Looks like I have some alternate sounds in mine then. Do you have BIN-files of those sounds ? WT ----- Original Message -----
Show quoted textHide quoted text
From: "Michael Buchner" <buchnerelectronics@...> To: <Simmons_Drums@yahoogroups.com> Sent: Monday, September 19, 2011 6:26 PM Subject: Re: [Simmons Drums] SDS7 eproms > The initial sounds were: bass (8k), tight snare (8k), bright tom (16k), > hihat (32k), crash cymbal(32k). > Michael > ----- Original Message ----- > From: WT > To: Simmons_Drums@yahoogroups.com > Sent: Monday, September 19, 2011 6:15 PM > Subject: [Simmons Drums] SDS7 eproms > > > > What sounds was the SDS7 initially shipped with ? > > My SDS7 has software version 9 installed. If anyone needs it, I have > copied > it in my eprom-programmer and can send you a bin-file. > > WT > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Re: [Simmons Drums] SDS7 eproms
2011-09-19 by Michael Buchner
Yes. I'll send them to your adress.
Show quoted textHide quoted text
----- Original Message -----
From: WT
To: Simmons_Drums@yahoogroups.com
Sent: Monday, September 19, 2011 6:31 PM
Subject: Re: [Simmons Drums] SDS7 eproms
Cool, thanks !
Looks like I have some alternate sounds in mine then.
Do you have BIN-files of those sounds ?
WT
----- Original Message -----
From: "Michael Buchner" <buchnerelectronics@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Monday, September 19, 2011 6:26 PM
Subject: Re: [Simmons Drums] SDS7 eproms
> The initial sounds were: bass (8k), tight snare (8k), bright tom (16k),
> hihat (32k), crash cymbal(32k).
> Michael
> ----- Original Message -----
> From: WT
> To: Simmons_Drums@yahoogroups.com
> Sent: Monday, September 19, 2011 6:15 PM
> Subject: [Simmons Drums] SDS7 eproms
>
>
>
> What sounds was the SDS7 initially shipped with ?
>
> My SDS7 has software version 9 installed. If anyone needs it, I have
> copied
> it in my eprom-programmer and can send you a bin-file.
>
> WT
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]Re: [Simmons Drums] SDS7 eproms
2011-09-26 by jesper
WT skrev 2011-09-19 18:15: > What sounds was the SDS7 initially shipped with ? The basic was bass, snare and three toms, wasn't it? Mine (8 cards) has a couple of custom proms from the Ultravox 90's period with all toms replaced with octabans. Those were the days! :D -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] SDS7 eproms
2011-09-26 by jesper
Michael Buchner skrev 2011-09-19 18:26: > The initial sounds were: bass (8k), tight snare (8k), bright tom (16k), > hihat (32k), crash cymbal(32k). Wow, my mistake then... -- electronically yours, jesper - back from "the dead", now with two working eyes again... - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] SDS7 eproms
2011-09-27 by Ed
I would love to hear the octaban eprom. Could you upload an audio clip? --- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
Show quoted textHide quoted text
> > WT skrev 2011-09-19 18:15: > > What sounds was the SDS7 initially shipped with ? > > The basic was bass, snare and three toms, wasn't it? > > Mine (8 cards) has a couple of custom proms from the Ultravox 90's > period with all toms replaced with octabans. Those were the days! :D > > -- > electronically yours, jesper > > - -- --- ---- ----- ---- --- -- - > www.electronic-obsession.se >
Re: [Simmons Drums] SDS7 eproms
2011-09-27 by WT
Wish I could but at the moment the SDS is in pieces and the output sounds like ass. WT ----- Original Message -----
Show quoted textHide quoted text
From: "Ed" <edrose1@...> To: <Simmons_Drums@yahoogroups.com> Sent: Tuesday, September 27, 2011 4:06 AM Subject: Re: [Simmons Drums] SDS7 eproms >I would love to hear the octaban eprom. Could you upload an audio clip? > > --- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote: >> >> WT skrev 2011-09-19 18:15: >> > What sounds was the SDS7 initially shipped with ? >> >> The basic was bass, snare and three toms, wasn't it? >> >> Mine (8 cards) has a couple of custom proms from the Ultravox 90's >> period with all toms replaced with octabans. Those were the days! :D >> >> -- >> electronically yours, jesper >> >> - -- --- ---- ----- ---- --- -- - >> www.electronic-obsession.se >> > > > > > ------------------------------------ > > Yahoo! Groups Links > > >
help
2011-09-27 by richard
I thought I sent a message to Simmons group . well lets try again. I sent you all what my brain looks like in an earlier E Mail. # 002828 . 7 channels, 7th has a plate . High hat input Bass.snare.tom,tom,tom,cymbal Does anyone know of somewhere in the U S that has the capability to completely Re Do my brain. Clean it,repair any missing or broken items in or on it ? Or do I have to send it to Simmons in England? When it is repaired I will sell it at a very reasonable price. I am 61 and it has been in my closet for yearrrrrs. I play bass and have no need for it. I want another musician to have it.it also has 7 1/4 jack holes for synth in . Let me know as soon as possible
Show quoted textHide quoted text
-----Original Message-----
From: WT <waveterm@...>
To: Simmons_Drums <Simmons_Drums@yahoogroups.com>
Sent: Tue, Sep 27, 2011 9:19 am
Subject: Re: [Simmons Drums] SDS7 eproms
Wish I could but at the moment the SDS is in pieces and the output sounds
like ass.
WT
----- Original Message -----
From: "Ed" <edrose1@swbell.net>
To: <Simmons_Drums@yahoogroups.com>
Sent: Tuesday, September 27, 2011 4:06 AM
Subject: Re: [Simmons Drums] SDS7 eproms
>I would love to hear the octaban eprom. Could you upload an audio clip?
>
> --- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
>>
>> WT skrev 2011-09-19 18:15:
>> > What sounds was the SDS7 initially shipped with ?
>>
>> The basic was bass, snare and three toms, wasn't it?
>>
>> Mine (8 cards) has a couple of custom proms from the Ultravox 90's
>> period with all toms replaced with octabans. Those were the days! :D
>>
>> --
>> electronically yours, jesper
>>
>> - -- --- ---- ----- ---- --- -- -
>> www.electronic-obsession.se
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]Re: [Simmons Drums] help
2011-09-27 by WT
Hi Richard, Simmons is no more. The company folded many many moons ago. There are a number of places that could do the repairs in the U S. The big question is if it is worth it ? What is wrong with it ? WT ----- Original Message -----
Show quoted textHide quoted text
From: "richard" <MayasLady@...> To: <Simmons_Drums@yahoogroups.com> Sent: Tuesday, September 27, 2011 6:56 PM Subject: [Simmons Drums] help > > I thought I sent a message to Simmons group . well lets try again. I sent > you all what my brain looks like in an earlier E Mail. # 002828 . 7 > channels, 7th has a plate . High hat input Bass.snare.tom,tom,tom,cymbal > Does anyone know of somewhere in the U S that has the capability to > completely Re Do my brain. Clean it,repair any missing or broken items in > or on it ? Or do I have to send it to Simmons in England? When it is > repaired I will sell it at a very reasonable price. I am 61 and it has > been in my closet for yearrrrrs. I play bass and have no need for it. I > want another musician to have it.it also has 7 1/4 jack holes for synth in > . Let me know as soon as possible > > > > > > > > > -----Original Message----- > From: WT <waveterm@...> > To: Simmons_Drums <Simmons_Drums@yahoogroups.com> > Sent: Tue, Sep 27, 2011 9:19 am > Subject: Re: [Simmons Drums] SDS7 eproms > > > > > > Wish I could but at the moment the SDS is in pieces and the output sounds > like ass. > > WT > > ----- Original Message ----- > From: "Ed" <edrose1@...> > To: <Simmons_Drums@yahoogroups.com> > Sent: Tuesday, September 27, 2011 4:06 AM > Subject: Re: [Simmons Drums] SDS7 eproms > >>I would love to hear the octaban eprom. Could you upload an audio clip? >> >> --- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote: >>> >>> WT skrev 2011-09-19 18:15: >>> > What sounds was the SDS7 initially shipped with ? >>> >>> The basic was bass, snare and three toms, wasn't it? >>> >>> Mine (8 cards) has a couple of custom proms from the Ultravox 90's >>> period with all toms replaced with octabans. Those were the days! :D >>> >>> -- >>> electronically yours, jesper >>> >>> - -- --- ---- ----- ---- --- -- - >>> www.electronic-obsession.se >>> >> >> >> >> >> ------------------------------------ >> >> Yahoo! Groups Links >> >> >> > > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Refixing
2011-09-27 by richard
Basically the snare output has trouble getting the snare sound and sometimes the tom go back and forth with its sounds and the buttons that transfer you to different sounds on the channels don't always work. I am also missing a couple of knobs and the little square rubber pads.
Show quoted textHide quoted text
-----Original Message-----
From: WT <waveterm@...>
To: Simmons_Drums <Simmons_Drums@yahoogroups.com>
Sent: Tue, Sep 27, 2011 10:06 am
Subject: Re: [Simmons Drums] help
Hi Richard,
Simmons is no more. The company folded many many moons ago.
There are a number of places that could do the repairs in the U S. The big
question is if it is worth it ?
What is wrong with it ?
WT
----- Original Message -----
From: "richard" <MayasLady@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Tuesday, September 27, 2011 6:56 PM
Subject: [Simmons Drums] help
>
> I thought I sent a message to Simmons group . well lets try again. I sent
> you all what my brain looks like in an earlier E Mail. # 002828 . 7
> channels, 7th has a plate . High hat input Bass.snare.tom,tom,tom,cymbal
> Does anyone know of somewhere in the U S that has the capability to
> completely Re Do my brain. Clean it,repair any missing or broken items in
> or on it ? Or do I have to send it to Simmons in England? When it is
> repaired I will sell it at a very reasonable price. I am 61 and it has
> been in my closet for yearrrrrs. I play bass and have no need for it. I
> want another musician to have it.it also has 7 1/4 jack holes for synth in
> . Let me know as soon as possible
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: WT <waveterm@...>
> To: Simmons_Drums <Simmons_Drums@yahoogroups.com>
> Sent: Tue, Sep 27, 2011 9:19 am
> Subject: Re: [Simmons Drums] SDS7 eproms
>
>
>
>
>
> Wish I could but at the moment the SDS is in pieces and the output sounds
> like ass.
>
> WT
>
> ----- Original Message -----
> From: "Ed" <edrose1@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Tuesday, September 27, 2011 4:06 AM
> Subject: Re: [Simmons Drums] SDS7 eproms
>
>>I would love to hear the octaban eprom. Could you upload an audio clip?
>>
>> --- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
>>>
>>> WT skrev 2011-09-19 18:15:
>>> > What sounds was the SDS7 initially shipped with ?
>>>
>>> The basic was bass, snare and three toms, wasn't it?
>>>
>>> Mine (8 cards) has a couple of custom proms from the Ultravox 90's
>>> period with all toms replaced with octabans. Those were the days! :D
>>>
>>> --
>>> electronically yours, jesper
>>>
>>> - -- --- ---- ----- ---- --- -- -
>>> www.electronic-obsession.se
>>>
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]Re: [Simmons Drums] Refixing
2011-09-27 by WT
By rubber pads you mean those on the bottom to prevent it from slipping or scratching ? The buttons to select preset/user settings are probably dirty and need cleaning but it could also be a problem with some of the circuits controlling soundselection. The snareproblem could be anything really..... WT ----- Original Message -----
Show quoted textHide quoted text
From: "richard" <MayasLady@...> To: <Simmons_Drums@yahoogroups.com> Sent: Tuesday, September 27, 2011 7:41 PM Subject: [Simmons Drums] Refixing > > Basically the snare output has trouble getting the snare sound and > sometimes the tom go back and forth with its sounds and the buttons that > transfer you to different sounds on the channels don't always work. I am > also missing a couple of knobs and the little square rubber pads. > > > > > > > > > -----Original Message----- > From: WT <waveterm@...> > To: Simmons_Drums <Simmons_Drums@yahoogroups.com> > Sent: Tue, Sep 27, 2011 10:06 am > Subject: Re: [Simmons Drums] help > > > > > > Hi Richard, > > Simmons is no more. The company folded many many moons ago. > > There are a number of places that could do the repairs in the U S. The big > question is if it is worth it ? > > What is wrong with it ? > > WT > > ----- Original Message ----- > From: "richard" <MayasLady@...> > To: <Simmons_Drums@yahoogroups.com> > Sent: Tuesday, September 27, 2011 6:56 PM > Subject: [Simmons Drums] help > >> >> I thought I sent a message to Simmons group . well lets try again. I >> sent >> you all what my brain looks like in an earlier E Mail. # 002828 . 7 >> channels, 7th has a plate . High hat input Bass.snare.tom,tom,tom,cymbal >> Does anyone know of somewhere in the U S that has the capability to >> completely Re Do my brain. Clean it,repair any missing or broken items in >> or on it ? Or do I have to send it to Simmons in England? When it is >> repaired I will sell it at a very reasonable price. I am 61 and it has >> been in my closet for yearrrrrs. I play bass and have no need for it. I >> want another musician to have it.it also has 7 1/4 jack holes for synth >> in >> . Let me know as soon as possible >> >> >> >> >> >> >> >> >> -----Original Message----- >> From: WT <waveterm@...> >> To: Simmons_Drums <Simmons_Drums@yahoogroups.com> >> Sent: Tue, Sep 27, 2011 9:19 am >> Subject: Re: [Simmons Drums] SDS7 eproms >> >> >> >> >> >> Wish I could but at the moment the SDS is in pieces and the output sounds >> like ass. >> >> WT >> >> ----- Original Message ----- >> From: "Ed" <edrose1@...> >> To: <Simmons_Drums@yahoogroups.com> >> Sent: Tuesday, September 27, 2011 4:06 AM >> Subject: Re: [Simmons Drums] SDS7 eproms >> >>>I would love to hear the octaban eprom. Could you upload an audio clip? >>> >>> --- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote: >>>> >>>> WT skrev 2011-09-19 18:15: >>>> > What sounds was the SDS7 initially shipped with ? >>>> >>>> The basic was bass, snare and three toms, wasn't it? >>>> >>>> Mine (8 cards) has a couple of custom proms from the Ultravox 90's >>>> period with all toms replaced with octabans. Those were the days! :D >>>> >>>> -- >>>> electronically yours, jesper >>>> >>>> - -- --- ---- ----- ---- --- -- - >>>> www.electronic-obsession.se >>>> >>> >>> >>> >>> >>> ------------------------------------ >>> >>> Yahoo! Groups Links >>> >>> >>> >> >> >> >> >> >> >> >> >> >> [Non-text portions of this message have been removed] >> >> >> >> ------------------------------------ >> >> Yahoo! Groups Links >> >> >> > > > > > > > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Re: [Simmons Drums] SDS7 eproms
2011-09-28 by jesper
Ed skrev 2011-09-27 04:06: > I would love to hear the octaban eprom. Could you upload an audio clip? I have plans to do a few sound files since I have plenty of gear people want to hear now. I'll try to remember this one too. :) I _think_ that it's custom. But all four tom-proms are replaced with what I think is the same octaban sample. -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] SDS7 eproms
2011-09-28 by WT
Send me one eprom and I\ufffdll copy it for the future :) WT ----- Original Message -----
Show quoted textHide quoted text
From: "jesper" <jesper@...> To: <Simmons_Drums@yahoogroups.com> Sent: Wednesday, September 28, 2011 11:02 AM Subject: Re: [Simmons Drums] SDS7 eproms > Ed skrev 2011-09-27 04:06: >> I would love to hear the octaban eprom. Could you upload an audio clip? > > I have plans to do a few sound files since I have plenty of gear people > want to hear now. I'll try to remember this one too. :) > > I _think_ that it's custom. But all four tom-proms are replaced with > what I think is the same octaban sample. > > -- > electronically yours, jesper > > - -- --- ---- ----- ---- --- -- - > www.electronic-obsession.se > > > ------------------------------------ > > Yahoo! Groups Links > > >